How to: Jailbreak iPhone 3G 2.2.1 – Windows PC QuickPWN Edition
Disclaimer – Neither TiPb nor I take any responsibility for any problems/issues/bricking/etc. that may occur while using this software to modify your iPhone. Please be aware of what you are doing.
A few days back we brought you a simple guide to jailbreak your iPhone with firmware 2.2.1 on your Mac. Well today we are showing some love for our Windows faithful.
This guide will show you how to jailbreak the iPhone 3g only, not the first generation iPhone. Some important notes before we begin: You must have iTunes 8 installed and you must be on firmware 2.2.1, if you are not, be sure to update via iTunes. Also make sure to go into the task manager and disable ANYTHING Apple or iTunes related.
Let’s get started, after the jump!
1. Get the tools.
Once you are positive you are running the 2.2.1 on your iPhone 3G and have iTunes 8 installed it’s time to get the tools you will need. Create a folder on your desktop named “Pwnage”, then download the following files into that folder.
Once you have downloaded the above files you should unzip the QuickPwn zip file inside the Pwnage folder you just created.
2. Launch QuickPwn
This should be simple enough no? Launch QuickPwn from the folder you extracted it to on your desktop.
3. Connect your iPhone 3G
Connect your iPhone 3G via USB to your computer and click the blue arrow to continue.
4. Locate Firmware
Now we have to click the browse button to locate your iPhone 3G firmware.
5. Selecting the 2.2.1 firmware IPSW
Select the 2.2.1 firmware IPSW file from the Pwnage folder you created on your desktop then select the IPSW file and click the open button.
6. Firmware Verification
QuickPwn will now verify you have selected the correct firmware. After it is verified click the blue arrow to continue.
7. Customize your firmware
This step allows you select what you’d like installed on your iPhone. You have the ability to select Cydia, Installer, and replace boot logos. Once you have made your selections click the blue arrow to continue on. If you want a full jailbreaking experience, installing Cydia and Installer is highly recommended.
8. Verify connection
QuickPwn will noW verify that your iPhone 3G is still connected to your PC. Again click the blue arrow to continue your journey…
9. Potential Tricky Part – Pay Attention
Ok, this part seems to give some people issues, but I assure you it does work. QuickPwn will now put your iPhone 3G into recovery mode. When its in recovery mode you will be given directions to: Hold the Home button for 5 seconds, Hold the Home and Power buttons for 10 seconds, then release the Power button and continuing holding the Home button until your iPhone is in DFU mode.
10. Let the jailbreaking begin – no going back now!
QuickPwn will detect your phone is in DFU mode and proceed with the jailbreaking process.
11. You are officially jailbroken – Congrats!
Well that’s it folks, it’s time to start exploring this whole new world you have just opened. For answers to more of the questions you may have regarding jailbreaking please head on into our forums. There are always members of our community willing to help you out!
September 29th, 2008 at 12:00 pm
Yeah it’s very simple. I was caught off guard when the popped up on me.
The odd thing is it told me to hold down for 20 seconds but when it got to 7 it stopped counting and continued on.
September 29th, 2008 at 1:35 pm
if i jailbreak and then want to go back to how it was before jailbreak, how easy is it to reverse this?
September 29th, 2008 at 1:46 pm
All you do to reverse it is do a simple restore via iTunes and you are good to go. It’s that easy.
September 29th, 2008 at 1:51 pm
Just done the jailbreak and really impressed how all my music and apps etc are still there!
September 29th, 2008 at 2:08 pm
Works nice, just like I did it a few weeks ago. Very clear instructions.
http://www.ivitto.wordpress.com
September 29th, 2008 at 3:55 pm
What will happen when the next version Apple’s software is released? Will jail broken phones need to be rstored and then broken again with QuickPwn 2.2? If so, what will happen to all the jail broken customizations or apps installed? Thanks for the help.
September 29th, 2008 at 6:02 pm
I would like to know the answer to question 6 as well. thanks
September 29th, 2008 at 6:07 pm
To answer number 6… yes you will have to restore in iTunes. Which is not a big deal at all. At least not to me.
September 29th, 2008 at 6:55 pm
1 more question. Can I still sync my jailbroken iPhone 3G to iTunes to get all my songs and all that?
September 29th, 2008 at 6:56 pm
@Brooks, you sure can.
September 29th, 2008 at 7:12 pm
I just bought my first iPhone. Switched from blackberry. I am just curious about the upside of jailbreaking? I am sorry if I am in wrong post for this question.
September 29th, 2008 at 7:14 pm
Ok, I opened Quickpwn and it first told me that it didn’t support my firmware version but I restarted it and it seems ok now. When clicking the next arrow after it tells me to plug in my iphone, it started searching or something and found like 3 firmware files? The firmware in this guide that I downloaded is the one I guide it to right? If you could respond real quick it would be great!
September 29th, 2008 at 7:37 pm
Is there any reason for the QuickPwn application not being able to load? Getting an error saying it failed to initialize properly(0xc0000135). Tried re-torrenting, getting from other mirrors, nothing seems to be working. Machine running XP. Thanks
September 29th, 2008 at 7:41 pm
@Brooks, you would be correct sir.
September 29th, 2008 at 8:05 pm
I can finish the QuickPwn process, but the Installer dosn’t work. Can not install any application. Any idea?
September 29th, 2008 at 8:52 pm
These directions specifically say the iPhone 3G, is there a different IPSW file for the 2G’s?
September 29th, 2008 at 8:57 pm
@Rick, yes there is. This was done on purpose due to some changes between 2g and 3g methods that may have confused some people. This is for 3g’s only.
September 29th, 2008 at 9:14 pm
If you jailbreak, you lose all information (programs, contacts, datebook, etc) on the phone and have to reinstall, correct?
September 30th, 2008 at 12:51 am
Chris Vitek,
No, that’s not the case. I just did it, and all my music, calendar, contacts, etc are still there.
September 30th, 2008 at 6:54 am
took the plunge an jailbroke my 3g uk iPhone yesterday ! Everything seemed fine till I tried some of my app store applications. Got the usual programs starting then closing scenario it even did this to the main phone application! Found some of the jailbroke apps good but none that really made me think it’s worth the hassle .anyway suppose I’ll try it again soon when I’ve got a few spare hours LOL . Was glad it was easy enough to restore my phone to it’s settings before I jailbroke now all I’d good again. Any ideas on what could have been the problem would be apprciated cheers chaps!
September 30th, 2008 at 8:30 am
Hi, the process went through like a dream, but still shows as locked and although it will now recognise another SIM i.e. vodaphone I cant unlock the phone. Asks me to connect to iTunes and of course iTunes tells me its an unsupported SIM. – pop in my O2 SIM and all’s right with the world. Any suggestions as to what I do next, would be appreciated.
September 30th, 2008 at 9:57 am
@Lorraine, this procedure is for jailbreaking only. You can not unlock any phones with this. You would need to download bootnueter from Installer and run that. That will unlock your phone to use with different sims/carriers.
September 30th, 2008 at 10:52 pm
Please Help !! I did the above and all worked as planned.. I got all the responses as mentioned above and now my Iphone has the pineapple logo on the screen and that is all it does. Nothing else appears and when I pull up Itunes it locks up itunes as well. Any help ? Thanks in advance
October 1st, 2008 at 1:56 am
Sounds like fun lolz but wat does jailbreaking do to the phone?
October 1st, 2008 at 4:53 am
@wonder Webb, after jailbreaking, go to Cydia, find/install the app Bossprefs, then tap the button that says “fix user did permissions”. That should fix your open/close issues.
@Allan, you may have to redo the process. Or restore back to original firmware first then try again.
To answer a few questions ive noticed: -Jailbreaking allows you to install 3rd party apps los of which are free. -These apps include Cycorder(video camera), SwirlyMMS(MMS Picture messaging), Winterboard(full visual customization), Quickgold(quick application/contacts launching), PdaNet(Internet tethering), TouchCast(streaming video podcasts), Snapture(zoomable and more camera), Categories(I have 50 apps all on one page categorized), SSH, the list goes on and on. The added features you get are well worth it. -For those fresh jailbrekers, don’t use the Installer app, use the Cydia app to install apps. It’s much more stable. -New firmware means new QuickPwn will be needed. Customizations of 3rd party apps can be backed up via SSH if new firmware come out -You do not lose any contacts, music, calendars, etc. It gets restored back after.
October 1st, 2008 at 7:50 am
How long it takes to jailbreak completely, bcoz it is almost more than 1 hr. still it has not restarted my iphone 2G Please help
Thanks
October 1st, 2008 at 9:36 am
@AAN, like it states up front, this process is for the iPhone 3g ONLY. I suggest you restore your phone in iTunes. Good luck.
October 1st, 2008 at 2:40 pm
thanks Jeremy Sikora, But now my iphone is such a state that it is not been recognized in itunes, what next …. I tried the same process several times but its the same … If possible could you please guide me how to restore…
October 2nd, 2008 at 3:50 am
you may want to try to do a dfu restore. This is done by a combination of holding down the home and power buttons for a certain amount of time. Google dfu mode and dfu restore for iphone to try.
October 2nd, 2008 at 11:08 pm
Identical problem to Hank Scorpio’s message dated: September 29th, 2008 at 7:37 pm. Saw no response. Where do I go to find out how to resolve this? Pretty please? Many thanks, Bart
October 4th, 2008 at 2:42 pm
Hey All, So I used Quickpwn 2.1 to jailbreak my 3G Iphone. Everything went smoothly but now I’ve noticed my 3G connection is not working. 3G icon and strength is noticable and very good but cannot seem to connect to any data transfer like email or updating weather etc. Wifi and Edge works fine when they are toggled on. Am I looking at a full restore and re-do quickpwn again? Appreciate any help guys. pho
October 5th, 2008 at 1:25 pm
I need help. I jailbreaked 2.1 alright. But I can not open any apple app I downloaded. It opens up app and the middle content not showing and after 3seconds it goes out to main screen. All the cydia app works fine and basic app comes with phone works too. Help me-
October 5th, 2008 at 5:40 pm
i got through the whole process up to when the apple logo goes away and then the apple sign shows up. but then it just stays on the apple logo. once in a while it will flash and then the logo will reappear but it doesnt load into the icons. how long should this take?
October 6th, 2008 at 1:44 am
how can i restore the notes after jailbreak? i lost all my notes and photos
please help
October 8th, 2008 at 10:19 am
Thank you.Just follow the instructions and it’s only 15 minutes to have an open Iphone 1st generation
October 8th, 2008 at 1:51 pm
did i have to return to the 7.7 itunes version after i have jailbreak my iphone???
October 8th, 2008 at 5:06 pm
Wow…that was easy. Reminds me of loading custom ROMs on my WinMo phone…
October 8th, 2008 at 5:28 pm
whenever I get to step 7 the program freezes and shuts down. I’m using vista.
October 8th, 2008 at 5:29 pm
I meant step 8
October 8th, 2008 at 7:01 pm
How long does the last step generally take? I have been looking at “Uploading exploit bootloader” for about 7 minutes…
October 9th, 2008 at 12:32 am
Does the Restore option on itunes also restore the original firmware?
October 9th, 2008 at 2:47 am
does the QuickPwn work with Vista?? because when i run it, a window pop up said that “QucikPwn has stop working” =/
October 9th, 2008 at 10:26 am
THX a million. Very well done gents. I tried the appleunlockiphone and payed 17 Pounds!!!! DO NOT USE, seem to be a fake.
Thanks again
October 9th, 2008 at 2:08 pm
Hi please suggest? I am using iphone3g in Singapore bought from USA. I am using a Turbo Sim through which I phone has got unlocked. If after jail breaking i restore the software will i need to activate iphone through at&t. Since i am in singapore and using sim of different provider i guess i will not be able to activate through at&t. Can any one suggest any was to skip at&t activation?
October 9th, 2008 at 3:57 pm
i read posts but wanna mak it clear.. after i jailbroke my iphone 3g i would be able to transfer and run .ipa files via itunes right?
( still sync with the itunes official?)
October 12th, 2008 at 3:34 am
To those getting the the “failed to initialize” error, I THINK you need .net2 installed….quickpwn ran on my Win XP virtual machine but not my wifes XP PC…upgrading her to .net2 now to see if it works. Will update on results. (They warn not to use a virtualized machine)
October 12th, 2008 at 3:37 am
Update…Yes I was right….intall .net2 framework in Windows Update
Hope that helps!
October 12th, 2008 at 3:48 am
Ok I got running but when it starts the firmware phase it just hangs there like others have said…..anyone worked this one out?
Cheers,
Rx
October 12th, 2008 at 4:00 am
Ok I see the problem….it’s not recognising the firmware file as the right one…it definately is….any ideas?
October 12th, 2008 at 9:46 am
So i did everithing right, step by step, but when it finished rebooting and turned on there was this stuped problem: my Iphone 3G didnt have Zone coverage, I couldn’t use Internet or make enny calls, everithing els worked..!
Plese help.
October 12th, 2008 at 9:30 pm
for those with the boot screen stuck after loading the firmware…read this website…http://www.geek.com/articles/mobile/jailbreak-your-iphone-3g-21-with-quickpwn-2008103/
could be an itunes issue
October 13th, 2008 at 12:13 am
Thanks heaps for the windose version i am aquiring a OSx on intell to look at some app design. but very well done i followed the on screen application instructions after reading the first few points on here and got it first go.
October 13th, 2008 at 9:39 am
got same problem with 49.Romulus stuck in step 6 http://img367.imageshack.us/my.php?image=quickbg5.jpg cant verify the IPSW ??? any ideas?? (i browse it from the pwnage folder on my desktop)
October 13th, 2008 at 1:14 pm
same problem as number 13 and 30 what should i do now? please help me!?
October 13th, 2008 at 7:03 pm
I jailbroke it at first my app store was working now when I install somethin like facebook or whateva when I open the app it closes right back
October 13th, 2008 at 11:46 pm
when i try to run the quick pwn app i get the app has failed to initilize, i could get it to work on my friends pc but he wasnt running sp3 any suggestions?
October 14th, 2008 at 9:46 am
guys.. make sure that u got .net framework installed ( and up to date)
October 15th, 2008 at 4:03 pm
thnx it works but how long does step number 10 takes cause it still seas preparing youre device follow the steps above, i did that but stil nothing happened
October 15th, 2008 at 7:31 pm
Do i lose the guarantee of the iphone if i Jailbreak it? Or if i restore it after, it will be as i never jailbreaked it? Tks in advance []
October 15th, 2008 at 7:40 pm
Sorry for the double post but i have a few more questions
Which are the differences between Cydia and Installer? They are 2 separated ‘worlds’ where i can find all that free applications? Which is the purpose of replacing boot logos? Why do i need it? There is any way to avoid that pineapple icon? lol TU very much =)
October 16th, 2008 at 2:48 pm
I go and do everything it says to do but as soon as it gets to the screen where it says wait for phone to go into restore mode it wont go past that. I let it run all night and it never once went past that part of it. what do i need to do?
October 17th, 2008 at 6:08 am
answer me in #59 and #60 pleaseee. tks
October 17th, 2008 at 11:40 am
easy peasyyyyy……simplest tutoriaa…i took me less then 10 minutes to JB my iphone….thanks to all those who made it possible…3 cheers
October 17th, 2008 at 1:29 pm
do we lose the guarantee of the phone if we restore it after jailbreaking? or apple have no way to know if the phone was jailbroken on the past? ty
October 19th, 2008 at 4:19 pm
I follow each step and competed the process but everytime i put my Tmobile sim in, it’s saying different sim detected but i can see it’s picking up the tmobile signal. It will not let me unlock. it goes to emergency mode. can you help
October 19th, 2008 at 7:19 pm
What is meant by “Also make sure to go into the task manager and disable ANYTHING Apple or iTunes related.”?
October 19th, 2008 at 11:15 pm
jailbreaking is not an unlock, there is no unlock for the 3g as of yet. thats why your tmobile wont work. (jay)
October 20th, 2008 at 11:31 am
Jailbreak OK, but all the previously installed apps (through App store) doesn’t work (it tried to launch, then after 2 sec return to home screen)…tried BossPrefs “Fix User Dir Permissions” still doesn’t work, anyone got same problem?
October 21st, 2008 at 1:11 am
I also did the above and all worked. I got all the responses as mentioned above and now my Iphone has the pineapple logo on the screen and that is all it does. Nothing else appears and when I pull up Itunes it locks up itunes as well. Any help ?
October 21st, 2008 at 2:53 am
Heyit wrks perfectly fine … i just wanan clarify few things … firstly i had taken a backup in panda Iphone Pc Suite, after updating to 2.1, i cudnt get the Pc Suite to wrk to get the data back, for this i used total commander tool and copied the data back like contacts, sms, pics etc … everything is wrking perfectly fine. secondly, i wanan know how do i uninstall this installer.app its not wrking perfectly i guess and i want a sms fwd option also .. irealsms is asking for code !! hope to hear frm u !! Doing a great wrk tho !!
October 21st, 2008 at 7:08 am
I have my Iphone 3G on software 2.0.1 and have tons of 3rd party apps installed. I want to upgrade to the new iphone 3g software of 2.1 and i need to know how to do that without losing any apps installed and any settings. If anybody can help me…PLEASEEE!!!
October 21st, 2008 at 7:14 pm
I have Itunes 8, i updated my iphone 3G to 2.1, is it fine if i jailbreak it ??? Thanks!!
October 21st, 2008 at 9:36 pm
why r ma cydia and installer r empty..???anyone could help..??
October 21st, 2008 at 9:40 pm
hey natz..!!u muz install bitesms instead of irealsms..bitesms u can formard n delete sms u 1…
October 21st, 2008 at 9:41 pm
i mean forward sms not formard aite…hahahakz..
October 22nd, 2008 at 5:01 am
PLease someone help me. I tried to upgrade my first generation iphone I think version 1.1.2 (not sure) to version 2.1 yesterday and after I finished, my iphone locked and is on emergency mode. I tried to restore things on itunes but that did not work either. I got a message saying that the SIM card is not recognized. Have I lost all my data? What can I do to restore my phone back? PLease help. I am living in Algeria and my iphone was bought in Lebanon . It worked perfectly well. I guess it was unlocked in Lebanon. Please someone help. Thank you.
October 22nd, 2008 at 5:14 am
Does the Jailbreak process work with the official unlocked Iphone ?
October 22nd, 2008 at 9:48 am
I tried to unlock my iPhone and when I run the program, the iPhone automatically shows the picture to connect to iTunes. And the pwn tool stops there
October 22nd, 2008 at 4:55 pm
okay so i hacked my iphone then a week later installer and cydia went blank so i hacked my iphone without uninstalling it and now installer and cydia wont show up at all n i kept hacking it but i think i shouldnt have but i dont know how to completely uninstall it so i can hack it again so if anyone can help me email me at iiloveyoulots34@aol.com
October 22nd, 2008 at 5:38 pm
i have the 3g iphone running v2.1 and itunes 8. jailbreaked my iphone. it worked perfectly. I have the pineapple and the installer and cydia. It booted up ok. when i go into itunes it asks me if i want to restore from my backup or create a new device. I think what happened was i downloaded and synced over v2.1 for iphone which i was already running. so i chose to create as a new device – now I’m restoring all my data but my phone is not working. please help
jh
October 22nd, 2008 at 6:42 pm
I’m trying to Jailbreak my phone, but QuickPwn tool stuck at brows firmware stage. I have the correct file as well as I have rebooted my phone a few times. Any suggestions?
October 23rd, 2008 at 12:16 am
wont boot up? stuck on pineapple? i was i just did the JB process again and this time it worked the only thing i did diff the second time was did not chose the pineapple and at the end when it reboots and it says your done i just left it all alone and waited for ever and it finaly booted up. its been fun
October 23rd, 2008 at 9:11 am
well the second time is a charm! took 15 mins, it retained all my data and everything still works – awesome!
October 23rd, 2008 at 4:16 pm
First time it was stuck on pineapple so i restored and second time I didn’t select replace boot logs. It worked like a 20 dollar bill at a brothel, thanks guys. If you are in NYC, drop me a note drinks on me.
October 23rd, 2008 at 4:58 pm
I want to jailbreak my iphone 3g but have a few questions after reading some reviews. im new to this so bare with me guys.
ive read reviews about how everything on my phone will be lost if jailbroken (contacts, mail, music, apps from apps store, etc). does this happen to many ppl?
is it ok to sync with itunes after?
when jailbroken, and new update has been released by apple, i dnt knw but does it automatically update your phone when connected? and is everything then lost? im sure AptBackup (i think) would be usefull here
please help n suggest anything else guys… thanks a lot.
October 23rd, 2008 at 5:54 pm
Its working fine.
Thanks a lot.I was looking for this from quite a few time.
October 23rd, 2008 at 6:02 pm
I jailbroke my phone and everything works fine but when i put a working tmobile sim card in the iphone it wont work any ideas why it wont work? do i have to install smoething?
October 23rd, 2008 at 6:12 pm
@Jeremy Sikora , this procedure is for jailbreaking only. You can not unlock any phones with this. You would need to download bootnueter from Installer and run that. That will unlock your phone to use with different sims/carriers.
This was your reply to someone here so my question to you Jeremy is…..can you find me a link with step by steps on how to unlock my iphone where i will be anle to use t-mobile with it? i have a old iphone i think it the 1st generation ans would love to have t mobile on it?
October 25th, 2008 at 2:12 am
why after jailbrake i have a msg nd it say: Different SIM detected please conect to iTunes?
October 26th, 2008 at 12:34 pm
hi recently jailbrake my iphone. if i sync with itunes it says “simcard inserted in this iphone doesn’t appear to be supported”
please help…i am not able to add music to my iphone
October 27th, 2008 at 12:09 pm
me too, itunes says “simcard inserted in this iphone doesn’t appear to be supported”
Please help
October 28th, 2008 at 3:02 pm
my keypad doesn’t respond anymore,, can u help me pls?
October 28th, 2008 at 5:37 pm
Wow, didn’t expect that to be so easy. Thanks alot and good luck to everyone else!
October 28th, 2008 at 7:30 pm
I did everthing up untill you have to get it to DFU mode, I did the steps exactly as it says, even tried it a few times, but at the end it get a error message saying “Your device has connected in the wrong mode” ??? I don’t understand. Any help would be appreciated
October 29th, 2008 at 1:05 pm
The smoothest install yet! Great easy to follow instructions. Thank you!!
Note: ‘Installer’ app is not stable and will cause your phone keypad to not respond…at least this is what I found when I installed it on my 3G iPhone!
October 29th, 2008 at 3:57 pm
CORRECTION: Deleting ‘Kate’ from Installer app will enable the phone keypad! Woo hoo!
October 30th, 2008 at 8:53 am
Just followed your instruction on my 3 week old 3G iPhone, what a breeze! Thanks for the instructions…now I can really enjoy my phone!
November 1st, 2008 at 1:15 pm
Again, same question appear, does it really work for iPhone 3G officially factory unlocked? Please confirm anyone…
November 1st, 2008 at 8:06 pm
Brilliant!!! Worked smoothly in the first try.
thanks a lot
November 2nd, 2008 at 7:02 pm
Brand New 3G with 2.1. I’ve tried this process many times over a few days. Everything goes well until putting it in DFU. I get to the screen telling me how to do the keys but nothing seems to work. It just sits there waiting.
I’ve tried it with iTunes running and shut down. Every time I end up cancelling the thing and then lose everything. Have to restore.
Any ideas? It must be something simple if I’m the only one having this problem.
Thanks
November 2nd, 2008 at 8:46 pm
Have been trying this out for a couple of days on Windows Vista (32-bit). Things seem to go well until step 10. It just sits there on the screen with “Uploading exploit bootloader…” and the iPhone screen is dark since the iPhone 3G seems to be totally powered off. I think the problem is in step 9 but followed that to the letter. Any suggetions? Thanks!
November 3rd, 2008 at 5:49 am
Took the plunge and just jailbroke my iPhone 3g with 2.1 firmware. I’m running Windows XP and iTunes 8. This tutorial worked like a charm. The only thing I had to do differently was I HAD to have iTunes running, as opposed to the disclaimer above that said “disable ANYTHING Apple or iTunes related.” I also chose not to install the pineapple boot screen, but did install Cydia and Installer. Thanks a million!
November 3rd, 2008 at 8:17 am
Is there a comprehensive list of apps available for jailbroken iPhones?
November 3rd, 2008 at 12:41 pm
Do I need WinZip installed on my computer to open QuickPWN? Is there a free download for WinZip?
November 3rd, 2008 at 7:33 pm
@Gg If you have Win XP then Zip is built in to the file system. A good zip alternative is 7zip, it’s free!! Check it out!!
November 4th, 2008 at 3:41 am
REY: I saw your post on the apps you can install. i just finished jb my 3g. Where can I find the apps you mentioned on your post?
Rey Says:
October 1st, 2008 at 4:53 am
@wonder Webb, after jailbreaking, go to Cydia, find/install the app Bossprefs, then tap the button that says “fix user did permissions”. That should fix your open/close issues.
@Allan, you may have to redo the process. Or restore back to original firmware first then try again.
To answer a few questions ive noticed: -Jailbreaking allows you to install 3rd party apps los of which are free. -These apps include Cycorder(video camera), SwirlyMMS(MMS Picture messaging), Winterboard(full visual customization), Quickgold(quick application/contacts launching), PdaNet(Internet tethering), TouchCast(streaming video podcasts), Snapture(zoomable and more camera), Categories(I have 50 apps all on one page categorized), SSH, the list goes on and on. The added features you get are well worth it. -For those fresh jailbrekers, don’t use the Installer app, use the Cydia app to install apps. It’s much more stable. -New firmware means new QuickPwn will be needed. Customizations of 3rd party apps can be backed up via SSH if new firmware come out -You do not lose any contacts, music, calendars, etc. It gets restored back after.
November 4th, 2008 at 1:55 pm
hey everybody that was very great and easy thanks a lot dude i looked all over the internet i couldnt find an easier way than this thanks a lot
November 4th, 2008 at 7:13 pm
Absolutely idiot proof… I am an idiot and it worked like a charm… Thanks!!!
November 4th, 2008 at 7:46 pm
My iphone 2.1 is jailbroken. My question is why i cant run apps from apps store i downloaded. It opens but close after few seconds. Please advise.
November 4th, 2008 at 8:10 pm
hi i try the process as you listed when i am on the step to browse the firmware it not giving me option to browse but automatic it detect my I-phone firmware which is 2.1
But i still try, it seem work at the beginning and on my I-phone show hard drive picture and PC screen showing jaibreaking process but after a while it give error message “your device has connected in the wrong mode. This can be caused by incorrect following of the instruction. Or a faulty USB connection. Please try again”
I try with different USB cable still the same message. I am using windows XP pro with SP 2 Need help from GURU
November 4th, 2008 at 9:21 pm
please advise on item 109. Thanks
November 5th, 2008 at 1:24 am
hi i try jailbreaking my iphone 3g and the last step on reboot how long dose it take to reboot it just stuck on the apple logo for a long time now over two hour
November 5th, 2008 at 4:35 am
just installed this and it worked like a dream
November 5th, 2008 at 2:42 pm
The last step refuses to work for me after trying it 9 times. I give up
November 5th, 2008 at 3:52 pm
will this work for the iPod Touch 2G?
November 5th, 2008 at 7:47 pm
My iphone 2.1 is jailbroken. My question is why i cant run apps from apps store i downloaded. It opens but close after few seconds. Please teach me.
November 6th, 2008 at 4:15 pm
The last step seems faulty to me. Every time I press and hold the home and power buttons at the same time, my iphone turns off, and it refuses to continue with the pwning. I have an iPhone 3g and I have checked that I have all the required files, as well as the .net Framework update.
November 7th, 2008 at 6:26 am
i need help in question 23 too pls my iphone stuck on the apple logo for more than 1day and when i try to restore by opening itunes it lock itunes as well……..help?
November 7th, 2008 at 7:16 am
I had my 3G iPhone jailbroken and installed some apps, including BossPrefs and QuickGold. Since I had these two, I hid both Cydia and BossPrefs, so that whenever I wanted to run any of them I would call QuickGold to start them up.
I had to restore my iPhone, and had it jailbroken again. It was completely restored from backup before that jailbreak procedure, and now Cydia doesn’t appear on Springboard.
Any one knows how to fix that?
Thanks
November 7th, 2008 at 3:15 pm
Followed all the instructions, had no problems on 2.1 Just remember to kill Apple/Itunes **** first. Only thing that took me by suprise was Pwnage doesn;t wait for you… you need to be ready to press the buttons etc in step 9… maybe people are mis-timing that.
November 7th, 2008 at 6:44 pm
I did all of the downloading and everything worked fine except my calls. I can’t dial any numbers and sometimes can’t answer calls. Please help this is killin me
November 8th, 2008 at 10:26 am
can i use this for my itouch?i just in brand new 3g and it works just fine it is idiot proof.thank you
November 8th, 2008 at 1:06 pm
The jailbreaking process went just as described. I did encounter some issues after the jailbreak, which may or may not be common. Launching all applications became slower by 3-4 seconds, which was no big deal. My iPhone would go into the re-arrange mode by itself 2-3x a day, which was also not a big deal. However, yesterday (about 20 or so days after the jailbreak), pushing the home button while the phone was “asleep” or on “standby” (screen is off) would not activiate the “slide to unlock” screen. The screen remained turned off. Trying to turn off the iPhone with the power button didn’t work either. It was as if the iPhone had locked up. However, when I plugged the power cord into the iPhone, as I first thought that the battery had run out, the iPhone came alive showing that my battery was still 1/2 full, and the “slide to unlock” screen also came up. With the power cord still plugged into the iPhone, the “home button” was working again to bring me back to the “home screen.” However, when the phone went back to the “sleep” mode, the “home button” stopped working again. I pulled the power cord, and when I reinserted it, I was able to wake up the phone. I repeated the process in letting the phone to go to “sleep” mode, and once again, the “home button” would not work and the phone seemed lock. So I finally restored my iPhone through iTunes, and now everything works again. Hopefully, if the iPhone getting locked up on the “sleep” mode is a common problem, the Jailbreak team will get it resolved. The other two problems I had were tolerable. But the iPhone locking up (assuming that it was because of the Jailbreak) makes Jailbreaking not worth the trouble.
November 8th, 2008 at 10:55 pm
this is for iphonehelp post put the iphone in duf mode again and plug in itune well holding the home button hit shift key and hold and clik on restore
November 9th, 2008 at 7:03 pm
error meassage cames: “your device has connected in a wrong mode…” what can I do?
November 10th, 2008 at 11:27 am
thank spin it work i will try jailbreak my iphone agian after restore but hope it wont get stuck on the apple logo agian.
November 10th, 2008 at 4:57 pm
Great tool! Was jailbreak My iPhone in a 10 minutes. Everything go fine. Thank You guys
November 10th, 2008 at 7:43 pm
My iphone 2.1 is jailbroken. My question is why i cant run apps from apps store i downloaded. It opens but close after few seconds. Kindly teach me.
November 11th, 2008 at 2:34 am
HI ,I am new to iphone 3g.Is there an easier way to download windows quickpwn 2.1 without using a torrent.I have a rather slow link with torrnt access disabled by our network administrators…
November 11th, 2008 at 9:33 am
Can i re-jailbreak my phone once it alreay jailbroken so i can take the pineapple logo at startup of the iphone? Or do i have to do a restore and then jailbreak it again. And now do i not get the pineapple logo at start up
November 11th, 2008 at 1:34 pm
when new firmware updates come out…. Which they will. Can I find them here? If not I would live to be notified of jailbreak updates. As for the Jailbreak process… FANTASTIC. This phone went from a 10 of 10 to a 15 0f 10. Would like to see a fully interrogated picture text App. You no all in one. I get a text and the picture is there… Love the 3G (”G” for Golden)
November 11th, 2008 at 3:21 pm
THANK YOU SO VERY MUCH for your well done tutorial — I was using another sites “how to” and was stuck on the second step and didn’t know how it to “browse” for the firmware. Thank goodness I found this one and realized they omited the IPSW 2.1 firmware downloading, I was under the impression that because my phone was updated to 2.1 firmware already it should’ve shown up automatically in the second “browse” screen. This worked without a glitch, took less than 5 minutes. Thanks again!
November 12th, 2008 at 9:01 am
Fantastic! Took less than 10 minues start to finish! Thank you so much!
November 12th, 2008 at 8:40 pm
Does the Jailbreak process work with the official unlocked Iphone 3g?
November 13th, 2008 at 4:27 am
Same as pat on 117 questions I tried 3 times already but I have no cydia icons or applications icons. I followed all instructions but it is not working for me. Help please
November 13th, 2008 at 7:01 am
Worked first time. fantastic
November 14th, 2008 at 1:11 pm
I finally took the plung. I was so frustrated with the restriction that AT&T and Apple have placed on the phone that I couldnt take it anymore. I WANT TO SEND PICS!
November 15th, 2008 at 1:09 pm
I jailbreak/unlock the phone but i cant make calls. Shows no service? I use a t mobile card and att card. What could be the issue?The wifi works tho. There were at times when I use one sim card and it works but when i change to another it wouldnt work and when i switch back to the other one that worked, it wouldn’t work after the switch.
November 15th, 2008 at 1:31 pm
this thing ruined my phone .. i followed the instructions exactly like required .. the phone doesn’t even load anymore it just shows the mac apple .. itunes doesnt even notice it anymore .. man can anyone help me? i even press the power and home button down and then i turn the phone on and it just keeps showing the apple .. i cant even get the chance to restore it through itunes …
November 15th, 2008 at 8:10 pm
the pineapple app does not work keep telling me i need another app to work pls help
November 15th, 2008 at 9:01 pm
I get stuck at step 10 I don’t get prompted to do those parts about putting into DFU mode, the itunes icon and usb cable just appear on my iphone everytime and i have to recover my iphone with itunes every time. HELPPPPPP!!! I have itunes 8 and i have downloaded all the correct files but it won’t work, what do i do. My email is: alexkelly92@googlemail.com if anyone could help me i would owe them forever. Thanks a million if you can
November 16th, 2008 at 12:31 pm
I’m stuck on the stupid little pineapple logo screen and its vibrated a few times. -.- Damn.
November 16th, 2008 at 3:22 pm
Awesome step by step instructions with visuals!!!
Took a little bit of searching to find this page, but I would highly recommend it!
Thanks for the hard work. Dr. J
November 17th, 2008 at 1:47 am
when i restore my iphone 3g to fireware 2.1 my iphone come up apple logo with usb connector and slide for emergency.please help me
November 17th, 2008 at 6:20 pm
If you are on ATT in the US does the jailbreak still work as intended?
November 17th, 2008 at 11:03 pm
Hello All..The above information..!! Its gr8.. U know wat ..two days back (11/15/2008).. I bought an unlocked Iphone..and with curiosity updated it using ITUNES.. lost evry thing…Only thing I had was a screen to make emergency calls…tried evry other thing on NET .. nothing worked but this..
There may be many.. who will be in the same situation in which I was about 2 hours before..
My Advice.. Try this …Step by step.. It will make your IPHONE not only work but even make it better…
Hats of to all the people who have made this possible and that also for free…You are realy doing a gr8888 job..
Thnx agn guys…
November 17th, 2008 at 11:10 pm
@cheaufomsh .. Get in touch with me at nishant.saurabbh@gmail.com.. I will help you out..was in same situation as you are now.. But the above info.. bailed me out .. tc
November 17th, 2008 at 11:11 pm
its nishant.saurabh@gmail.com
November 18th, 2008 at 6:23 am
2 Questions: 1. i haven’t tried jail break before and this will be my first time on my phone, so is this QuickPwn for me? 2. What if there is some problem during the process, will the phone never recover again? Guys do reply, m bit worried
November 18th, 2008 at 7:00 am
I jailbroke my iphone 2.1 firmware using QuickPwn. Everything worked great until the stage where the apple logo comes on. It didn’t seem to progress beyond that. It took about 6 hours (I went to bed) before the phone was usable. During that time, it often rebooted itself and sometimes vibrated. So if you find yourself with the same situation, don’t panic too much. Leave it and forget about it. It might be that the number of applications you have installed on your phone lengthen the jailbreak process. The other thing – this was my first time to jailbreak my iphone. Hope this helps some people.
November 18th, 2008 at 11:56 am
dear friend i have a iphone 3g 16 gb my problem is that its bluetooth doest work properly it doesnt detect bluetooth devices so i cant send or receive songs photos or anything
November 18th, 2008 at 1:28 pm
HELP HELP!! my iphone wont restore in itunes (i have the current one)…it keeps saying error 9 and the help tips given from apple didnt help at all…..i hope someone out there has an answer…i cant place or receive ANYTHING!!! ARGH!
November 18th, 2008 at 3:04 pm
@Rajat .. follow the given steps carefully and u wont have any problems.. If you run into errors.. try again..It ran into errors 2 times…( all were my mistakes)…but 3rd time I succedded..And yes.. you can restore again yr I phone from Itunes.. if you want to revert back…
Cheers Nishant
November 18th, 2008 at 3:53 pm
i get stuck by step 6 it does recodgnise ipsw but it doesnt go further then that plzzz help
November 19th, 2008 at 7:15 am
@Nishant thanks buddy that gave me the confidence. YIPPI, i just jail broke my iPhone 3G within 4 minutes flat. Thanks man for the help, it was my first time and did it with confidence. I just needed to install the .NET framework 2, that’s it. Thank you everyone
November 19th, 2008 at 7:31 am
I jailbreaked my iphone bt the apps store apps are not working. Please help………
November 19th, 2008 at 1:01 pm
Just want to say Thanks for this tutorial. I managed to get mine done and working. I kept getting stuck on the apple logo after all appeared to go well. (firmware 2.1, itunes
Anyway, I restored to my back up and that was the problem. Once I restored as new it worked and I am reloading it now. I did this just to get the catagories so I hope it works.
November 19th, 2008 at 2:59 pm
All worked but the phone keeps resetting when I try and sync regular apps. I tired quite a few times and the last the logo was back. Now I have to restore again, so I give up. As much as I would like the extras, I do not want something so buggy/ Maybe I’ll try again next week.
November 19th, 2008 at 3:01 pm
“# ISHAAN Says: November 19th, 2008 at 7:31 am
I jailbreaked my iphone bt the apps store apps are not working. Please help………”
ISHAAN
Maybe try restarting the phone,meaning poer it don and turn it back on. If all else fails just do a restore. If it does not recognize put phone back into DFU mode hold home and power until restart then just hold home it should go into restore mode.
November 19th, 2008 at 3:01 pm
My “W” is stuck, sorry, I meant power it down
November 20th, 2008 at 12:37 am
i tried it like a maillion times it wont work i think something is wrong with my usb connection or something. i tried everything i keeps saying you deivce has connected in the wrong mode, this can be caused by the incorrect following of the instructions, or a faulty USB connection, please try again if u guys have any ideas to help me out please contact me at allenchen1993@gmail.com. thanks guys if u are willing to help. god bless u. cool now if you guys have the answer for my mis fortune please feel free to contact me as well thanks you.
November 20th, 2008 at 3:15 am
I have the same issue as allen chen. Its really strange because I am no stranger to unlocking an iphone its always worked before, Any advice will be much appreciated
November 20th, 2008 at 9:21 am
i have a question i got an iphone 8gb an i want to jail break it i found out it is not llegal but im kinda scard that my phone might glith i want to know the safest way to do some help=)
November 20th, 2008 at 9:46 pm
I just got a 3G iPhone 2.1 last week and able to Jailbreak the iPhone; However, I am looking high and low on how to install the SMS software the enable SMS message forwarding,cut and paste.
Would appreciate anyone can point me to the tight link or provide instruction how to do it.
Thanks, tcinzheng
November 20th, 2008 at 10:12 pm
I am taking the plunge tomorrow (jailbreak) with my new 3g iphone I have windows xp operating system I am unsure if I should get the latest .net framework. Is the latest 2.0 or 3.5? I would assume that 3.5 is the newest however I have read mention of updating to 2.0 can someone please help? Thanks
November 20th, 2008 at 10:16 pm
To add to the last reply, I have windows xp with service pack 2. Should I upgrade to service pack 3. The reason I have not already done so is because I heard that service pack 3 does not agree with shared files from the internet. Thanks again.
November 21st, 2008 at 12:16 am
I have an iPhone 3g FW 2.1 and I have followed the process using QuickPwn but the process hangs when QuickPwn resets the iPhone to RecoveryMode – then it just sits there doing nothing. I have tried this over 20 times now over the past month with no success. Any help or suggestions would be greatly appreciated at this stage – before I lauch mu iPhone at the nearest wall
Thanks heaps in advance.
November 21st, 2008 at 2:02 am
Thank you for the great instructions. I have been going back and forth on whether or not to do it, and now that I have… I love it! Thanks again!
November 21st, 2008 at 10:17 am
Will it still work with FW 2.2?
November 21st, 2008 at 3:10 pm
I just tried to jailbreak my iphone I have recently downloaded apps for my iphone via bittorrent to prepare for the fun ahead, however I do not know how to install these apps. Should I have cidia etc. as an app on my iphone? I am unsure if the jailbreak worked, how can I tell?
November 21st, 2008 at 6:00 pm
I had to restore and somehow my iphone updated to 2.2 firmware. Am I fu%8ed for jailbreaking now? can Someone pls help? Thanks
November 22nd, 2008 at 8:04 pm
Well I feel like an idiot. I get stuck on step 3! I have iphone 3G, Itunes 8, and firmware 2.1. I’ve downloaded pwnage and I run the program but it never recognizes my iphone when I plug it in. Does any one know how to troubleshoot this?
November 23rd, 2008 at 7:54 am
(macaronicaesar) The pwnage program isnt ready for 2.2 firmware yet. Have a look here,
http://blog.iphone-dev.org/post/60830674/sir-step-away-from-the-keyboard
November 23rd, 2008 at 2:35 pm
i jz bought an iphone 3g 2days ago….and i donno there is such a big problem to upgrade through itune… i downgrade my iphone 3g from 2.2 to 2.1 , y my phone still show no service ?? can anybody tell me how to do??
November 23rd, 2008 at 8:04 pm
i have brand new iphone 3G 8g, i did factory defult restore, now only thing i am seeing in screen is emergny call, I am using for T-mobile sevice, when i insert tmobile sim with turbo sim does not do anyting, it’s asking me to insert valid sim card withou pin enter. DOn know what to do now. Thx for your help
November 24th, 2008 at 1:13 am
I bought my unlock iphone from Australia and I’m living in Malaysia. If my phone is already unlocked, jailbreaking the phone, will it lock up the phone again? Thanks!
November 24th, 2008 at 12:31 pm
I jailbroke my iphone yesterday….I plugged it in to itunes then itunes downloaded a file and RESTORED EVERYTHING. Now my iphone is back to saying “connect to itunes….insert valid sim” same ****! I am tyring to download pwn, but my school computers are not letting me open them…saying it has an error…maybe the firewall is blocking it? My laptop is also not responding to the program. What should I do? Should I try it on another computer?
November 24th, 2008 at 3:39 pm
My Iphone is officially unlocked for 2.2 however, I need to know how to get apps, more importantly, games on my iphone can someone pls help? P.S. Bad Ash: You are great. I wish I could package you up and keep you in my back pocket for future reference. Apple or 3rd parties should come out with an app to access your brain. Thanks so much for everything on this site.
November 24th, 2008 at 7:47 pm
hi guys when my iphone was rebooting its taking forever .. and its not responding waht does this mean
November 25th, 2008 at 12:52 am
Hi, i have an IPHONE 3G running on turbosim (originally AT&T) and now bahrain sim card is used. Can you please help me jailbreak this Iphone. Will the turbosim will work even after the jailbreak? I have 2.1 and would like to keep same firmware. I heard people who upgraded to 2.2 and turbosim didnt work. Can you please help me jailbreak my 2.1 IPHONE 3G. I only have a Windows Vista and waht tool i need for jailbreak? I have some questions:
1) Shall i remove the turbosim and chip before the jailbreak? 2) after jailbreak, i can put turbosim and will it work? 3) i heard i need to activare in jailbreak, where can i find this and wah is this for? 4) what firmware I need to use -can you give me the link?
thanks, chris
November 25th, 2008 at 7:46 am
Hi,
i got AT&T orginal 3G Iphone from USA version 2.1 and got unlocked in india, at present i am using my local carrier sim card with turbo sim but some how i am not able to connect my phone with itunes..it shows sim card not compatible..currently using itunes 8 version, do i have to use different itune version?? can you please suggest me as i have always remove my sim card to connect to itunes.. 2. my phone icon seems to be showing problem as when i click on it for keypad page, it comes to home screen after 3 seconds and within that time period all functions are disabled in phone icon..what should i do??
November 25th, 2008 at 4:40 pm
If after the jailbreak you can’t make dial calls because the phone dialer freezes and goes back to the main menu, try this:
1- Uninstall Kate from Installer: this is what everyone recommends, seems to work for a lot of people but didn’t work for me.
2- Then go to Installer again and uninstall these apps:
A) Mobile enhancer B) RIP DEV preferences
3- Reboot your iPhone.
That’s what I did and got my dial pad back again.
Hope this helps someone, I spent like three hours searching for a solution…
November 28th, 2008 at 12:47 pm
I got this error at step 9: “Your device has connected in the wrong mode. This can be caused by incorrect following of the instruction. Or a faulty USB connection. Please try again”
I have a jailbreaked iPod Touch 32Gb 1st gen fw 2.1, i just updated it to 2.2 from iTunes and tried to pwn it with Quickpwn 2.2, but at the step 9 i got that error.
It’s strange cuz i’ve done this many times with with fw 2.0 and 2.1 with no errors, but now i can’t do it with 2.2
I read all posts and found that allen chen, Christopher V, Dustin Kavanagh, Mike, Noli and me have the same problem.
Any advice email me: mark_mm2000@yahoo.com
November 28th, 2008 at 3:27 pm
@Spartan7: I haven’t been following this thread so sorry for the late reply. You’ve probably already figured this out but all the apps I mentioned come from Cydia
November 29th, 2008 at 3:29 pm
i tried the jail breaking thing and it worked the whole way untill it got to the logo of the pinnaple thing and it didnt move fore like 2 hours so i did it again and still the same thing happened plz helpp!! i have v2.0!!
November 30th, 2008 at 7:57 pm
just upgraded my 2g iphone to 2.0, now i need to jailbreak it again. can anyone tell me would i lose all my messages and notes if i do it again?
thanx
November 30th, 2008 at 8:15 pm
Answer to posts 6 & 7, I did this about a week ago, worked a treat I upgraded to itunes 8 2.2 did the jailbreak, worked just fine, as it should, but then I went and did something very stupid, and tried to load ziphone onto it, it braught up a silly looking cartoon man with some Russian word in a bubble, and would not progress from there, did a restore still could not get ziphone 3.0 to work, so I will be using the method asked about in posts 6 & 7, I wanted to try ziphone so I could install an app I got to my iphone, I run Windows xp and have no clue how to get the app folder from my desk top to my iphone, it was a free app, pretty nifty little thing, but cant get it onto my iphone from the pc, any tips would be greatly appreciated
December 1st, 2008 at 2:45 pm
hey guys I unlocked my 2.1 firmware iphone 1st gen and after all of that, the signal bar is completely depleted and i cant open Cydia, Installer, Safari, or make calls. And my tmobile logo wont appear. how do i get it working again? Please reply asap.
December 2nd, 2008 at 12:55 am
Hey I have the 2.2 Firmware. How can I get this off my phone and install the 2.1 Firmware. And to everyone else. My buddy has the 2.1 Firmware. It downloaded NO PROBLEM. and EVERYTHING is absolutely awesome. He was downloading apps for hours. Nothing has gone wrong. Thanks to this site.
December 2nd, 2008 at 1:13 pm
I did it !!! After a week of trying evertything!!
I have a jailbraked iPod touch 1st gen, 2.2 firmware working 100% I used QuickPwn 2.2
How to solve the ERROR (post 183): “Your device has connected in the wrong mode. This can be caused by incorrect following of the instruction. Or a faulty USB connection. Please try again”
SOLUTION: It is pretty easy, i wasn’t pressing the HOME button enough. What worked for me is to press the HOME button with the NAIL, and VOILA it worked !!!
To all those newbies i advice you to press the HOME button with your nail in step 9. Pretty easy solution but nobody told me how to solve it!
December 4th, 2008 at 9:09 am
well … took the plunge and it made a good bit of kit a superb device …. I had the problem with the phone app not working buy “Koas post #182″ cured that in 5 mins …
Anyone recommend a landscape text app ? then life is complete.
KC
December 4th, 2008 at 4:07 pm
I have just done my iphone i was a little bit scared to mess about with it at first but it really is simple to do and now i can do so much more with my iphone great stuff thanks…
December 8th, 2008 at 3:02 pm
i got an error
December 9th, 2008 at 3:52 pm
@Koas Mobile Enhancer was the only app installed of the 3 u mentioned. Uninstalled it and got my dialpad back! Thanks alot!
December 9th, 2008 at 9:58 pm
i jailbroke yesterday folling these steps and everything worked just fine… untill i found out my phone wont make ANY CALLS it texts, goes on the internet and everything! but when i click on the green phone symbol to make a call it just freezes and goes to the home page!!! what should i do!!! the phones kinda useless without being able to make or recieve calls…..
December 11th, 2008 at 12:04 pm
my phone have a phone symbol. when you press so no come out green symbol there is not come out phone symbol when you press go automatic go to orginal screen
December 11th, 2008 at 1:33 pm
Hi Nishant
I have just jailbroken a 1g firmware 2.1 but cannot use any SIM on it. It says invalid SIM though it allows me to receive and make calls from the Emergency Pad but somehow I cannot load the applications.I think it is only jailbroken and not unlocked..how do I do it ? Thanks brother.:)
December 11th, 2008 at 4:41 pm
Just like to thank Koas for post 182… Well played m8….:)
December 12th, 2008 at 10:18 pm
continuing #195… i restored it and jailbroke it again and then the same problem happened, at first everything worked, then there was an error. then the same thing happened where i cant make calls! is there any way to fix/prevent that?!
December 13th, 2008 at 3:44 am
how to connect jailbreak iphone 3g with itunes
December 13th, 2008 at 3:06 pm
I was worried about jailbreaking my phone, as am a bit of a tech moron. Am so grateful though…wicked stuff to be had. So just wanna say thanks from West London surprised and v.happy guy!
December 22nd, 2008 at 6:09 pm
Guys, I really need help. So the jailbreaking was succesfull but when I got to the retarting part, my iPhone installed all those things, then restarted, but it kept staying on the boot image. I waited 20 minutes and it vibrated a lot of times, but it still didnt open. What should I do?
I beg you, I need help!
December 23rd, 2008 at 4:06 am
I go to load Pwnage and it says needs required .net framework v2.0 what the hell is that?
December 23rd, 2008 at 11:36 pm
To mani problems to do the jailbreak, some bady know that is de main problem of do this process.
I think this is not a secure jailbreak method…or we are doing something wrong….to mani questions but no answer
December 24th, 2008 at 3:51 am
@Koas:
Thanx m8! My phone works again
(for the first few hours ik works well, but this morning the ap. crashes)
December 29th, 2008 at 2:03 pm
well thank you so much. It take less than 15 mins for me.
December 30th, 2008 at 8:42 am
I too would like to thank Koas for post #182 – I am an absolute rookie with this stuff and was not impressed that my phone app wasn’t working even though everything else was
thanks mate – well played
December 30th, 2008 at 2:39 pm
@KOAS: thanks for the solution on the phone app error. The problem occured after a week or two and i (stupid enough) backuped de phone after the jailbreak (without a back up of the legit back up). I was dreading the thought of a clean install, what would have meant that 50% of my data would be lost…
So you see, you’re my hero dude…
Enjoy new years eve and have a great 2009….
January 1st, 2009 at 1:39 am
DFU mode: 1:hold sleep/wake buttom and home button for about ten seconds till screen turns off. 2:hold sleep/wake button and then like one second later (before screen turns on)hold the home button and then hold them both till screen turns back on. 3:when the screen come back on with apple logo release the sleep/wake button and continue holding the home button until u see the itunes logo with cable screen.
January 1st, 2009 at 5:49 pm
HELP ME PLS I’m stuck at the pineapple logo screen. QuickPwn said i’m successfully jailbreaked my iphone and it will work after the reboot. But when i reboot it, it stuck at the boot screen. Any advice. Thanks in advance
January 3rd, 2009 at 8:10 am
Hey guys – After seeing this monster list and how the mods and experts seem to stop answering questions at around 30 something — I think someone should go through these all and compile a nice little FAQ page.
Please?
Especially for the open/close issues, Not using Installer b/c Cydia is more stable, And some answers for ppl who experience Hangs Perhaps those concerned with Notepad Data Loss and whatnot.
Good Luck with this insane thread.
January 8th, 2009 at 4:23 pm
Hi guys..need help for the firmware verification on my iphone 3g v.2.2.. I already downloaded the tools for jailbreaking it…does this verification takes a while?thanks…
January 9th, 2009 at 2:46 pm
this worked for me.
thanks.
Koas Says:
November 25th, 2008 at 4:40 pm
If after the jailbreak you can’t make dial calls because the phone dialer freezes and goes back to the main menu, try this:
1- Uninstall Kate from Installer: this is what everyone recommends, seems to work for a lot of people but didn’t work for me.
2- Then go to Installer again and uninstall these apps:
A) Mobile enhancer B) RIP DEV preferences
3- Reboot your iPhone.
That’s what I did and got my dial pad back again.
Hope this helps someone, I spent like three hours searching for a solution…
January 16th, 2009 at 12:55 pm
Dude i have an iphone 2g with firmware 2.1 loaded i have done the Jailbreak thing but can u please help me how to install applications on it…i dont have an aplle id neither do i have a credit card to register for it….whats the name of the directory in the Itunes folder where the applications are there….PLEASE HELP!!!!! my mail id id nikunja83@gmail.com….please reply via mil if possible…thanx
January 19th, 2009 at 11:16 am
Hi guys, I need help with my iPhone 3G, which I got from an uncle who bought it online from China. I put an ATT sim from my regular phone into the iphone and it makes and receive call fine, but it will not connect with itune. My computer recognized it only as a removable drive, also there is no WiFi connection, when I checked network there is no option for WiFi. Another thing there are no itune or Safari icon on the phone screen. What should I do.
January 25th, 2009 at 3:48 pm
Hii, uhm i neeed help and i dnt feel like payinf 20 bucks to a stranger who cant even help
i have a 2g iphone i unlocked it using pwnage, erything was fine buh i dot my phone was not jailbroken yet so i used the pwnage program again buh this time sumhing BAAD happendd ! the pineapple logo popped up and a few seconds later a cartoon picture of a guy , i believe it was that steve guy , popped up and it froze nothing moved so i restored my iphone and it went back to the begingin to the emergency mode. so that means my phone isnt unlocked ? so then i used the pwnage again and it WONT work D: im gettin awfully saad ive tried everything and nothing helped. buh the weird thing is, EVEN THO IM STILL ON EMERGENCY MODE I CAN STILL MAKE AND RECIEVE CALLS. thats weird so does that mean that my fone is unlocked ? buh i cant get to my main menu either its stuck on emergency mode ! PLEASE SOMEBODY HELP ME GET AT MY MYSPACE http://WWW.MYSPACE.COM/PUTOFACETAMMY OR EMAIL NGOCMIKEDOK@HOTMAIL.COM I REALLY NEEED HELP PLEASE !!!!
January 25th, 2009 at 3:48 pm
Hii, uhm i neeed help and i dnt feel like payinf 20 bucks to a stranger who cant even help
i have a 2g iphone i unlocked it using pwnage, erything was fine buh i dot my phone was not jailbroken yet so i used the pwnage program again buh this time sumhing BAAD happendd ! the pineapple logo popped up and a few seconds later a cartoon picture of a guy , i believe it was that steve guy , popped up and it froze nothing moved so i restored my iphone and it went back to the begingin to the emergency mode. so that means my phone isnt unlocked ? so then i used the pwnage again and it WONT work D: im gettin awfully saad ive tried everything and nothing helped. buh the weird thing is, EVEN THO IM STILL ON EMERGENCY MODE I CAN STILL MAKE AND RECIEVE CALLS. thats weird so does that mean that my fone is unlocked ? buh i cant get to my main menu either its stuck on emergency mode ! PLEASE SOMEBODY HELP ME GET AT MY MYSPACE http://WWW.MYSPACE.COM/PUTOFACETAMMY OR EMAIL NGOCMIKEDOK@HOTMAIL.COM I REALLY NEEED HELP PLEASE !!!!
January 27th, 2009 at 6:13 am
Hi I am trying to jailbreak my phone what is the HOME button that I am meant to be holding in
January 29th, 2009 at 8:55 am
The home button is on the front of your iphone, its the big circle one at the bottom !
January 29th, 2009 at 8:12 pm
when i finish hacking it will i be able to use tmobile with it?
January 30th, 2009 at 8:23 pm
After i jailbroke my sim stopped workin can someone plz let me noe wat to do???
February 1st, 2009 at 1:29 am
I love it!!!! totally awesome!!!!! Thanks for everything
February 3rd, 2009 at 11:58 pm
so im at the step where im selecting the firmware and it wont give me the green check mark activating the blue arrow to move on. i have the firmware downloaded and in the file on my desktop. when i browse and select the file it just has the spinning loading icon for a few seconds then doesn’t do anything.
Can you help me?
February 5th, 2009 at 5:23 pm
you have to install cydia!
February 7th, 2009 at 2:24 am
i think you misunderstood im at the firmware verification step and it wont verify it. iv downloaded the iphone1,2 -2.1 firmware a bunch of times and it will not work it just keeps having that spinning icon like its loading for a few seconds then just does nothing.?!?!?!?!?
February 8th, 2009 at 8:01 pm
I found an Iphone 3G and seems to be totally locked (AT&T shut it down). Do I simply have to follow the unlocking procedure or is there more to it?
February 9th, 2009 at 9:23 pm
I can get QuickPwn to go pass this step: Firmware Verification. What should I do?
February 10th, 2009 at 9:52 pm
HELP! im stuck on step 5/6 im doing everything right but its just not giving me the chance to move on. can you tell me what im doing wrong or how to solve this please.
February 14th, 2009 at 8:03 pm
I paid £15 yesterday for a so called iPhone specialist to jailbreak my phone and it didnt work correctly, ive just follwed the instructions here and its been done by me in just under 7 mins (benefits of having 4gb ram on laptop I suppose).
Thanks guys.
February 15th, 2009 at 1:30 pm
i have a problem with my iPhone its a 2nd gen iphone 3g and i used these steps and it says it was successful but my iphone wont reboot and it keeps on turning off and a white screen flashes for a sec and it tries to reboot again plz help
February 16th, 2009 at 8:07 am
I have an answer for you Edwin it is simple go to itune connect your iphone with itune go to devices category click on iphone then in the version hold shift and click restor and select the iphone software(.ipsw) file that you downloaded
February 16th, 2009 at 8:22 am
i have jailbroken iphone 3g 2.2….i downloaded frre application from iTunes and synced it to the phone but it doesnt appear……?
February 16th, 2009 at 2:16 pm
I was up reading forums about jailbreaking iphones, the pros and cons. I found more pros so i decided to proceed. Once i did the steps, found it was real easy, i came to realize my ATT service was no more. so i changed it back to how it was, was there something i did wrong? Although i did mess with the cool apps from cydia, real nice. Please help.
February 16th, 2009 at 2:26 pm
Its the new 3G by the way, Thanks
February 16th, 2009 at 4:08 pm
I once jailbrak one i-phone 3g and it went well is working properly. i did this for my friend but it wont reboot when i finished jailbreaking the i-phone 3g is said that everything went well but it wont restart. the only thing that i see in the i-phone is an apple and thats it. i need help, i don’t know what to do? please help i need to give the phone to my friend. i appreciate if someone can e-mail me and help me with this problem.
February 16th, 2009 at 6:49 pm
i just jailbroke my iphone 3g that i just got today, and it will not connect to at&t, it has no signal, it was b4 i jalbroke it, any help guys
February 16th, 2009 at 10:09 pm
i have same problem as 237, any answers
February 17th, 2009 at 10:49 am
Wow, well im still very new ti my Iphone 3g (Australian version) and now i couldn’t be happier. Everything’s working like a charm. Thanks guys. your all truly amazing.
February 17th, 2009 at 10:51 am
Oh and by the way. I’ve been fiddeling around with my Itunes acount and various extremely strenuous websites. Can anyone please tell me how i can use a ringtone(preferably one from my Itunes) as a default ringtone. cheers
February 17th, 2009 at 9:04 pm
This is BS…i just tried this. Everything was working fine. Waiting for phone to restart but that ugly *** pinapple would not get off the screen. phone vibed 2x and that was it. so had to restore…**** this method…dont use it
February 17th, 2009 at 11:45 pm
hey,
i downgraded from 2.2.1 to 2.2, and i tried to jailbreak. i went through thw whole process but cydia will not install. installer however will.
anyone have any ideas as to why?
thanks alot
February 18th, 2009 at 2:54 pm
Mark M thank you…Your advise worked I have my dialer back…
February 18th, 2009 at 9:25 pm
after jailbreaking will i be able to use any sim?
February 19th, 2009 at 12:31 am
how do you diable itunes and is it important ?
February 19th, 2009 at 12:47 am
what do you do if quick pwn wont work
February 19th, 2009 at 10:36 am
This instruction is a FAKE. On this time and on time when someone published this tutorial it wasn’t firmware 2.2.1 for 3G. Second, this screenshots is from QuickPwn that support ONLY firmware ver 2.2, 2.0 and 2.1 – You can see this on screenshot. On this moment there is NO option to Unlock iphone 3G using this new QuickPwn 2.2.5 for Windows. You can see this in text file downloaded with software:
FEATURES
February 19th, 2009 at 11:05 am
Ignore the above post everyone, all of the guides supply the most recent files you use and the process is as described in the guide. So yes, all of TiPb guides, if followed correctly, work perfectly.
February 19th, 2009 at 9:29 pm
Dev-Team still working on new Yellown0w software for new modem firmware – So it’s mind that there is NO yellowsn0w software for modem firmware that comes with firmware 2.2.1 – THIS IS TRUE Please look closely on screenshots,, There is information that QuickPwn is supporting only firmware 2.1 2.0.3 and 2.0.5 – I’m not blank, I know what i can see.
And finally: Dev-Team explain why DO NOT to update to iPhone 2.2.1 http://www.theiphoneblog.com/2009/01/29/musclenerd-dev-team-overviews-221-iphone-firmware/
February 20th, 2009 at 5:45 am
am using windows xpservice pack2 i have the apple device software update and the quicpwn but any time i open the quicpwn it says the application failed to initialize properly (0×00001350) click ok to terminate the application pls help me
February 20th, 2009 at 5:47 am
my email labista45@yahoomail.com
February 20th, 2009 at 10:09 am
@DJMaskak, this guide is for a Jailbreak only…. has nothing to do with unlocking. Please read it again…
February 20th, 2009 at 10:14 am
If you want to unlock the latest firmware you must use the following guide: http://www.theiphoneblog.com/2008/11/24/jailbreak-iphone-22-mac-os-edition/
February 20th, 2009 at 11:32 am
I’m having the same issue as Dominic…
February 20th, 2009 at 2:17 pm
All is fine until step 10 but then it just stays as the screenshot shows…FOR HOURS!!! What am I doing wrong? I have a Iphone 3g with 2.2.1 firmwear and have no desire to unlock, just jailbreak using Windows (vista if that matters).
February 20th, 2009 at 7:40 pm
question on step number 9 recovery mode, it says hold down home button for 5 second then hold down home and power button for 10 seconds. do i need to let go home button first and then proceed and press and hold home and power button at the same time? thanks
February 21st, 2009 at 1:21 pm
Anyone know where I can jailbreak a version 2.1 8G iphone.. the original iphone.. I can’t seem to find any sites that work just seen mostly 3G stuff thx
February 21st, 2009 at 10:36 pm
Eveything goes fine until my iPhone reboots, it stays on the apple boot-up symbol for ages and vibrates once in a while for whatever reason then restarts and does it all again, i have run QuickPwn several times and according to it all is well. Help please? Ty.
February 21st, 2009 at 10:39 pm
Oh and iTunes no longer recognises the phone because an ivalid response was recieved from the device so i can’t restore.
February 21st, 2009 at 10:55 pm
Actually nevermind, i managed to restore. Getting the jailbreak to work would be nice though…
February 22nd, 2009 at 3:47 pm
Before I try this, I just wanted to know if all my apps, data, pictures, etc. will be deleted? My brother gave me his old iphone so I won’t have the same itunes to restore it with.
February 22nd, 2009 at 8:27 pm
HHEEELLP!!! Process went thru smoothly but all that displays now is the apple logo. Cant restore in itunes says i need to unlock but there is only the apple logo Every once in a while it dies and restarts on its own or vibrates Help This is weird I would appreciate any help possible my email is jj.adkisson@gmail.com please dont spam thank you
February 22nd, 2009 at 9:18 pm
“i have a problem with my iPhone its a 2nd gen iphone 3g and i used these steps and it says it was successful but my iphone wont reboot and it keeps on turning off and a white screen flashes for a sec and it tries to reboot again plz help”
I tried to Jailbreak my updated 2.2.1 3g last night and got the same problem. Bootscreen with flashes and vibrates twice and then repeat. Here’s how to fix it…
Turn off the phone and leave it off overnight like 8hrs. This should turn off any stuff running while it is off. Then open the latest version of itunes on your computer. Plug in the USB. Right away push the home key and the power button and hold it until you see the itunes cable logo. It might take a while. Be patient and wait for it. The phone should then start in some kind of safe mode and itunes will ask if you want to reset the phone. Hopefully you would have backed up the phone before attempting the jailbreak. After you have restored the factory settings you would restore the back up copy of your phone. Reason for boot log problem might be because you have too many applications loaded on the phone. That’s what happened to me. After I restored the phone to factory settings with 2.2.1 firmware it was barebones. I tried the jailbreak again and it worked. Then I re-synced all of my apps.
Hope this helps.
February 22nd, 2009 at 11:58 pm
3g 2.2.1 being used with a SIM unlock. Was working fine. Now stuck on emergency dialer. How do I get it back to workig with the sim adapter? Will jailbreaking it do it? Again I don’t want to unlock. I just want off this damn emergency dialer screen so I can use my sim adapter again.
February 23rd, 2009 at 2:29 am
I did the JB and things went fine all the way to the final step. Now the phone stays stuck on the pineapple for hours. I tried to go back to Itunes and it says that it cannot read the phone until I unlock it with my passcode. However I cannot see my screen to unlock it with my passcode. ALL I see is the stupid pineapple. SOME ONE HELP.. My phone is stuck cannot not unlock it with my passcode!!! to even restore it back!
February 23rd, 2009 at 12:57 pm
@Jeremy Sikora. You’re right, I’m sorry.
My mistake.
Are you from Poland ? If yest please write e-mail to me 
February 23rd, 2009 at 1:07 pm
my e-mail djmaslak@go2.pl
February 23rd, 2009 at 4:17 pm
@ Rayven, go onto youtube and type in how to restore iphone, it will be by a guy called “howtoiphone” that’ll sort it, i had the same problem
February 24th, 2009 at 3:25 am
@Jamie… Thanks so much…
February 24th, 2009 at 5:10 am
Hi guys. Does jailbreaking also means unlocking the iphone 3G. Cause I dont see an option for unlock like it used to be with the 2G. I just wanna be sure before I start the process. Thank you
February 24th, 2009 at 9:54 am
No it’s not. To unblock your 3G phone you need to use yellowsn0w trick, but ONLY if you have firmware 2.2.0. If you have firmware 2.2.1 already installed then, there is nothing you can do now.
February 24th, 2009 at 7:58 pm
i jailbroke yesterday folling these steps and everything worked just fine… until the next day all day I used my phone then all of a sudden i found out my phone wont make ANY CALLS it texts, goes on the internet and everything! but when i click on the green phone symbol to make a call it just freezes and goes to the home page!!! what should i do!!! the phones kinda useless without being able to make or recieve calls….HELP PLS.. Thanks in advance
February 25th, 2009 at 1:39 pm
I have firmware 2.2.1 already installed on my phone, i purchased the phone with it already on it, tried jailbreaking it and was unable to use my phone again until i restored factory settings..
Any tips on getting jailbreak to work on my phone, thanks in advance
February 25th, 2009 at 3:06 pm
hey all ive had my phone for a couple months now but im really scared to jailbreak because of all these problems ive been hearing about are there any permanent problems that could result from jailbreaking that i cant fix with a restore?
February 26th, 2009 at 2:11 pm
Hi after my jailbreak using the software the phone cant start up it only show the apple logo.
February 26th, 2009 at 9:42 pm
Me and my wife both have Iphone and i was wondering if I dl the software to JB my phone and it works on mine, will it effect her phone as well if she does not choose to JB her’s. Would we have to jailbreak both is what I’m basically asking. Thanks.
February 27th, 2009 at 6:29 am
@ Jeremy Sikora: One more thing…I have an 8 Gig Iphone…is it worth the trouble? will I have enough memory to carry the apps that are worth it? Thanks.
February 28th, 2009 at 9:48 am
Hi,
Im using a pc. Im stuck at the recovery mode. Hasnt started the hold home button process yet. Is that okay if I’ve been on here for about 30 minutes?
February 28th, 2009 at 9:50 am
should i restore for quickpwn to look for itunes?
February 28th, 2009 at 4:50 pm
Hello, I used quickpwn to jailbreak my iphone today but I cannot seem to install any of the cracked apps I downloaded. It keeps on telling me that the content cannot be verified on itunes. Is there anything I can do about it??? Please
February 28th, 2009 at 7:53 pm
Hi I have problem jailbreak the Iphone the model is MB048LL. anyone can help. Thk
February 28th, 2009 at 11:06 pm
Absolute genius! Simple to install, perfect in execution. Thank you!!!
March 1st, 2009 at 1:14 am
U r awsome that is all what I gotta say
March 1st, 2009 at 2:26 pm
hey. thank u so much for your tutorial. the jailbreak was a success but i didn’t get any signal from my carrier. the wifi worked fine. fyi, i bought my phone unlocked.maybe anyone can help ? thanks in advance:)
March 1st, 2009 at 3:27 pm
Thanks you so much!! Awsome tips & tools for iPhone. Work great!
March 1st, 2009 at 5:29 pm
i just unlocked my iPhone, i dont know why i did but i know i would like to the looks. is there a web site i can go to to gwet themes ect. from ?? thnx
March 1st, 2009 at 7:51 pm
Hey Guys,
I jailbroke my 3g iphone today and after it was done it froze on the apple (when booting). After 30 mins it finally went to my opening screen, everything was ok and the jailbreak was successful. I would concur that it was due to my 20 apps I had downloaded…maybe it locks for 1 minute or so per application? Scared the **** out of me though….
March 1st, 2009 at 8:27 pm
can anyone explain how to apply themes to my iPhone and where i can get the software to do it
March 1st, 2009 at 9:02 pm
I have been on the screen where it says waiting for phone in recovery mode for 10 min now, How long does it take to go to the next steps in unlocking/jailbraking.. HELp
March 2nd, 2009 at 2:39 am
I’ve already gone through the whole process and reached the “Successful Jailbreak” screen, but it’s been about 45 mins and my iTouch still hasn’t shown anything but the pineapple…Should i pull the plug on the USB or should i just wait for awhile longer?
March 2nd, 2009 at 2:53 am
Well i decided to just pull out the USB cord and now iTunes doesn’t recognize it and it won’t load up either, my computer still “dings” whenever i plug in the USB and i can still turn on and off the actual iTouch, but it still won’t do anythign more than the f***ing pineapple (even though the design is BAMF)
March 2nd, 2009 at 3:14 am
it’s working a reinforced a fact that i knew all to well to begin with anyways, my computer sucks
March 2nd, 2009 at 7:16 am
i have a problem when i begin the jail rbeak processs i get to the part where i have to get ready to press the buttons a number of seconds but it doesnt go any further it doesnt go to the next step where i actually have o start pressing the home and power buttons im running on windows xp any one know what to do ?
March 2nd, 2009 at 12:14 pm
hi.. i got a problem. please help. I have brought a phone in the US and using it in india using turbo sim. now when i did an update to latest latest software with a normal sim, it gives me an error message, that NO SIM card installed. Insert a Valid SIM with no PIN lock to activate iphone.
please help what shld i do… im struck.
March 2nd, 2009 at 8:45 pm
Whenever i try to locate my firmware i cant find it anywhere please help
March 2nd, 2009 at 11:25 pm
So guys i’ve jailbroken and restored my iphone 3g 2.2.1 like 100x’s with no probs (same way as explained above) now i know 2.2.1 ***** up installing downloaded itune apps (like a collection from a torrent site or smthn) altho it did work once (no clue why) anyways everytime i try to install the apps with itunes it says cannot be verified! i’ve tryed to seauth and reauth with itunes store and abunch of other things anyone know how to get this to work?? if not with itunes mabye vis ssh? lemme know please i’ll check back here or u can email me junior@hush.ai tnx alot!!
March 3rd, 2009 at 3:50 am
i jailbroke my 3g unsuccessfully. It froze on the apple screen on startup. i let it sit, and sit, and, sit, and all it does is flash and go back to the apple scree. Oh and occasionally it vibrates. I tried re jailbreaking the phone and now the phone has gone completely black. it won’t turn on doing the reboot sequence, when I plug it in my computer or plug it into the wall. I think i am royally %$#@ed. PLEASE HELP ASAP!!!!!
March 3rd, 2009 at 4:54 am
hi there….i got the same problem with the guy above,actually i jailbreak my iphone succesfully but same thing happen it turns on then off then vibrate…the apple icon appears on the screen too…and its already 2 days…can somebody help me solve this….thanks!!!
March 3rd, 2009 at 7:12 am
Every time i try with my Firmware: iPhone1,22.2.15H11_Restore.ipsw it says “Firmware Error Strin”!? I also downloaded a the firmware from the link above and tried to use that, but the same error message came! Please Help!
March 3rd, 2009 at 9:10 am
if iphone 1,22.2.15H11 doesnt work try downloading iphone1,22.0.25C1Restore or iphone1,22.25G77Restore
March 4th, 2009 at 3:10 am
can anyone help me in deleting some apps that i downloaded using the cydia?
plz
thank u
March 4th, 2009 at 8:00 am
i ve just made it (without installer and reboot) in 10 minutes. everything seems working properly.
thx to everybody,
March 4th, 2009 at 8:04 am
i did it! yess! if u guys have no connection issues after you jb, make sure you ACTIVATE your phone after first, updating the firmware and before you jb. good luck!:)
March 4th, 2009 at 1:50 pm
dude i have prob …when i go for jail breaking my i pod touch with 2.2.1 framwork…….. my quick pawn 2.2.5 show error of ipsw is not support or its is corrupted i know its have2.2.1 (5H11a) and i have downloaded from every sourse but its not workin plzzzzzzzz help i fed up to download 242MB every time
March 4th, 2009 at 3:45 pm
THANNNKK UUU SOOO MUCH THE DEV TEAM I OPENED MY SECOND IPHONE 16GB 3G MYSELF IM PROUD OF MYSELF =) even though i had to pay 50 bucks for a friend to jailbreak my first one
thank u :p
March 4th, 2009 at 9:36 pm
1 question…(moree like a couple)
is it legal
will my iphone crash
please comment
P PL PLE PLEA PLEAS PLEASE PLEASE? PLEASE?? PLEASE? PLEASE PLEAS PLEA PLE PL P
thx for reedin
March 4th, 2009 at 9:44 pm
will this work for windows xp
March 5th, 2009 at 12:48 pm
If you’re getting stuck at the load screen (apple/pineapple) then you need to restore in iTunes. Hold Power and Home and iTunes should recognize it. Do a restore with the file you downloaded above. When that’s done, re-try the QwickPWN and you should be good to go. I’m all set. I’m now re-syncing the apps from my iTunes library.
I’m on Windows Vista.
Question- where do I download the new application? Like categories.
Thanks!
March 6th, 2009 at 12:26 pm
i’ve been trying to jailbreak my iphone for 3 days. I found this cite and it took about 15 minutes…MAX. TOO EASy… good looking family….
March 6th, 2009 at 11:42 pm
Ran this on my iPhone and had a glitch others had mentioned, it froze at the apple boot screen.
If I had to guess I would say it was something to do with the configuration or apps installed prior to jailbreaking because of what I found…
There is a simple fix. I probably could have found this on the forum but since I had played with my 4th gen ipod I pretty well knew what to do, and this worked.
March 7th, 2009 at 12:43 am
Hey i just got my iphone and iam trying too find a good fireware for win2000 i got itunes 8 and it doesent work for the the files quickpwn and the fireware.
March 7th, 2009 at 4:24 pm
this is easy to do and simple to complete thanks for the help
March 8th, 2009 at 9:46 pm
i went through all the steps. it said appears to have been installed correctly at the end. But when i restarted my phone it just sits at the black screen with the apple icon and doesnt do anything. after awhile it vibrates. does this mean my phone if broke for good?
March 8th, 2009 at 11:19 pm
why cant i find my carrier? not able to make calls or sms
March 9th, 2009 at 12:48 am
I went through all the steps and it seems to have been installed correctly at the end. But when i restarted my phone it just sits at the black screen with the apple icon and doesnt do anything. after awhile it vibrates. My iTunes doesn’t recognize the phone being plugged in .. so I’m unable to even restore it! What are my options to fix this problem?
March 9th, 2009 at 1:30 am
i have followed the steps and now my phone is just showing a black screen with the apple icon what do i do now
March 9th, 2009 at 2:30 am
It finally worked:). It did not work on my first two attempts. I had to do a restore, than it worked like a charm. Thanks for all the hard work. I had to put phone in dfu mode in order for itunes to recognize my phone.
March 9th, 2009 at 11:14 am
BRO I JUST GOTTA SAY THIS IS SIMPLY THE BEST AND PEOPLE YOU ALL ARE JUST DOING IT WRONG…THANKS A MILLION JEREMY!!!!
March 9th, 2009 at 2:49 pm
I used the quick pwn to jailbrake/unlock my fist gen. Iphone. However, after I insert my Tmobile sim card I get a dysplay message reading”different sim detected please connect to itunes”. the phone wont go past the emergency call screen. Can any one help?. Thanks
March 9th, 2009 at 10:20 pm
what is “dfu” mode?
March 10th, 2009 at 12:20 am
After I restored my phone and launch Quickpwn it will ask to locate the firmware and then it will verify it but it gives me the following error. “firmware string error” Can anyone help me please
March 10th, 2009 at 2:43 pm
If I jailbreak an iphone, and slip my sim card in, will AT&T know, especially if i DONT use the internet, except for wifi ofcourse. and will gps work as well?
March 10th, 2009 at 8:39 pm
Thank you KOA! You are a complete life saver! This phone is giving me so much grief .. would you believe I have gone back to the store 4 times already?! I was seriously going to lose my mind … but your advice worked. You are amazing!!
March 11th, 2009 at 3:45 pm
Can i jailbreak with my work computer which is window and then go back to mac which is my home computer? will there be any problems using my mac
March 11th, 2009 at 8:36 pm
i just JB my Iphone and everything went smooth until the last step , it said that everything went well and that phone would restart and then nothing , the apple logo comes on and stays on , i figure i need to wait , but how long….. email response to felcampos31@hotmail.com
March 12th, 2009 at 3:13 pm
I tried r.estoring and then running qwkpwn again, but it does the same thing, stuck on the pineapple. any ideas
March 12th, 2009 at 7:28 pm
Well its simple really all you do is restore it and jail break goes POOF =)
March 12th, 2009 at 7:29 pm
apparently I got it right. thanks all
March 12th, 2009 at 9:56 pm
I allready installed the version but I cannot install my previous apps that I had on the version the iphone does not update them gives me error. What can I do? I have an 3G iphone.
March 12th, 2009 at 10:13 pm
It says the app could not be verified! What can i do??? before with the 2.2 I didnt have this problem and now with 2.2.1 I cant install all my app
March 13th, 2009 at 4:09 am
Brilliant you guys, worked first time. Perfect instructions, a lot of the commercial software industry could learn a thing or two from you all, take it from me… in the commercial software business. This is a slick and well put together system!
March 13th, 2009 at 9:03 am
thats what i did kurogane, but it still hung up on the restart. I finally did see a pic a dude with like russian in the dialog box eventually, but i stopped there. Had to crash for work so hopefully i can get somewhere with it today. All tips and pointers greatly welcome
March 13th, 2009 at 11:28 am
I just would like to know if i jailbreak my iPhone will i lose my contacts?
March 13th, 2009 at 12:09 pm
finally got it, and saw my mistake (i think). i was kinda tired. When i restored, i fully restored. The logo was stuck. This time, with a clear head, i stopped after the factory restore and there it is. Ill probably jb my wifes tomorrow. Ill see if that really was my problem.
March 13th, 2009 at 12:24 pm
Hey, I just posted a blog of my 5 favorite jail-break apps! http://www.shipiboconibo.com/2009/03/top-5-applications-for-jail-broken-iphones/
March 14th, 2009 at 2:18 am
I cannot longer use my regular crack apps that I used to have on my iphone 3G firm 2.2 because I upgraded to 2.2.1 why is this? What can I do? should I go back to 2.2?
March 15th, 2009 at 7:15 pm
I am trying to get my iphone 2g 4GB unlocked but it wont do it using quickpwn. I am repeatedly getting error message that my usb is faulty or I might not have followed the instructions right.
HELP PLEASE !
March 16th, 2009 at 10:22 pm
i’ve just jailbroken my iphone3g.. but how can i use it to activate another sim card? thanx i need answer…
March 17th, 2009 at 3:16 am
how long does it take after you jailbreak your iphone said it has finished but apple signs still on phone and its still plug in usb ..
March 17th, 2009 at 8:07 am
Hi I installed the 2.2.1. firmware,un my iphone 8GB (1st generation) using quickpawn on my pc (WinXP) and all went well. The problem I have now is that I can’t install any of applications I have on my hard disc trough itunes…Any help???? tnx
March 17th, 2009 at 8:07 am
i dont know what happen but when i finished mine it froze n now i dont know what to do cuz i held tha home button with the power button but it styl doesnt come
March 17th, 2009 at 9:23 am
worked like a champ. i think people should learn how to rean and follow instructions.
March 17th, 2009 at 10:08 am
Solution for iphone that hang at the logo after jailbreak.
Iphone hang after jailbreak because of the installed applications.
March 17th, 2009 at 8:01 pm
i did all this and almost bricked my phone and now i am scared
March 17th, 2009 at 8:17 pm
hi, i did it. it works so good when i turned of 3G n go outside it shows up E on top i tried to use the internet and it works can you tell me why? do i be charge money or on my data plan? thx lot
March 18th, 2009 at 9:51 am
Hi Help anybody
i read all those instructions and tried to jailbroke my iPhone 3G but forgot to disable my passcode before the jailbroke and now i have a problem that when everythings done while jailbreaking the reboot process is still on after it has been already 12 hrs or more and my iPhone doesn’t turn on so Anyone with better idea?
March 18th, 2009 at 9:57 am
ya Sean u n i have the same problem so any body can help how long does it take to reboot it still showing apple logo
March 18th, 2009 at 12:43 pm
PLEASE READ No.345
March 18th, 2009 at 1:16 pm
i have a 3g iphone w/ 2.2.1(5h11)version and 02.30.03 modem firmware will this change my baseline to the 02.28.00 baseline?
March 18th, 2009 at 5:05 pm
I have a 3G iPhone, the version is 2.2(5G77) so the problem is I want to update to 2.2.1 but I’m afraid I will get block. What can I do to migrate to 2.2.1 and then unblock my phone.
Kind regards,
BB
March 18th, 2009 at 5:07 pm
And what does jailbroke mean? I’m new user and I have started the task to be familiar with. Thank you in advance. BB
March 18th, 2009 at 5:52 pm
Jailbroke means you can install non apple approved software on you iPhone. And don’t update to 2.2.1
March 19th, 2009 at 9:28 am
Thanks
March 19th, 2009 at 1:46 pm
I tried to jailbreak my iPhone, everything went on well, but the phone stays in black screen with the apple in the middle…seems it’s not restarting. what should I do?
March 19th, 2009 at 8:02 pm
I’ve tried to jailbreak my iphone and i followed all the steps but when i get to select firmware it keeps saying firmware error string. what does that mean? and how can i fix it?
March 20th, 2009 at 12:03 pm
I’ve bought a locked 3g iphone but without the original operator’s simcard. Can I still jailbreak and unlock with a different operator’s simcard?
March 20th, 2009 at 7:29 pm
Is it just me, or can u others on vista not save the firmware onto the folder? I wish i knew how to do it. Help please. It just keeps saying cannot open, and then when i save it to that folder, it does not appear. Help
March 20th, 2009 at 7:51 pm
When my iPhone 3G (firmware 2.2.1) got stuck at the logo screen (with the apple/pineapple), i just ran QwkPwn again and Jailbroke it (while still in the boot logo screen), and it worked!
Good Luckk!
March 20th, 2009 at 9:38 pm
AND, if that doesn’t work: 1)Close iTunes 2)RESTART computer (while iPhone/iPod is connected) 3)Wait until iPhone unlock screen comes up
If that doesn’t work, then I don’t know what to tell you… Restore?
Good luck!
March 21st, 2009 at 3:02 am
i have a dumb question how do i unzip the first download
March 21st, 2009 at 6:17 am
it worked. simple and easy to do!!! tnx guys!
March 21st, 2009 at 9:30 am
Will itunes still work onn the iphone?
March 21st, 2009 at 9:51 am
i held it for seconds but i guess it wasnt long enough now its stucked there n its not recognizing my iphone is connected…..wat should i do
March 21st, 2009 at 3:26 pm
can anyone give us a good answer to “rebooting problem”? what we have to do when it happen to us for example?
March 21st, 2009 at 7:38 pm
Hey there, haven’t purchased the iPhone yet. Was going going to get a blackberry after finding out jailbreaking. During my research I found many instances of people saying: a. Visual Voicemail is GONE BABY GONE b. end call button GONE BABY GONE c. restart your iphone to END A CALL d. FAVORITES ARE GONE BABY GONE
Is this true? Visual voicemail I don’t really mind, but the End call button… Can anyone confirm the End Call button is still there after jailbreaking? Thanks…
March 22nd, 2009 at 12:49 am
easy as 123
March 22nd, 2009 at 3:14 am
Not worth the trouble. I wanted to jailbreak it because I liked the idea of intelliscreen application. But the phone kept freezing at the apple logo after jailbreaking. I will see if factory restore works. What a waste of time!
March 22nd, 2009 at 11:48 am
hey can any one help jailbreaking my iphone its showing me firmware error
March 22nd, 2009 at 11:55 am
hey plz reply soon it wil b of great helpppppppppppppppp plzzzzzzzzzzzzzzzzzzzzz
March 22nd, 2009 at 2:54 pm
Hi there I have iPhone and looking to jailbreak my iPhone I bought my iphone a few weeks ago at at@t I was wondering if I jailbreak my iPhone will I be charged texting for convo with friends on yahoo messanger and how about using as a modem for my laptop how often do u think I should use without any problems
March 22nd, 2009 at 10:56 pm
I have jailbroken my iphone 3g and now im trying to restore my contacts..photos if possiable, but i would be happy with just the contact..Any ideas on how i can do this? is it possiable?…
March 22nd, 2009 at 10:56 pm
oh i did back them up
March 23rd, 2009 at 6:29 am
just installed. got a pineapple icon. how long before it starts up?
March 23rd, 2009 at 12:12 pm
I try to install some of the games from installous but they don’t appeal the icon on the sprngboad. What can I do to get all the icon?
March 23rd, 2009 at 4:40 pm
I have downloaded the software but i keep getting a message telling me that i dont have the right .NET something or other. Whats going down??
March 23rd, 2009 at 6:01 pm
I was wondering if this was the program than can change the background theme, get free games this etc.
March 23rd, 2009 at 6:23 pm
whats the .NET files i have no ideas what its talking about plz help
March 24th, 2009 at 3:54 am
This was super easy, and super fast! I have Vista 64-bit, and it worked FLAWLESSLY! As a precaution, and this is likely not necessary, but it can’t hurt, I launched QuickPwn with Administrator privileges.
March 24th, 2009 at 12:59 pm
I downloaded both the tools into pwnage folder on desktop like recommended, but when i try to open quickpwn an error screen pops up and wont let quickpwn run. is this a common problem and how can i get past it?
March 24th, 2009 at 4:05 pm
Redmoon i assume u didnt open the task manager to close all tases running by Apple. Does anyone know if i will be able to update to 3 version when released when i have done all these?
March 24th, 2009 at 4:05 pm
tasks i meant…sorry misspeled!
March 24th, 2009 at 5:55 pm
I’m on .NET 3.5 SP1. U can download it from microsoft.com.
Shut down anything Apple-related, and don’t forget Bonjour.
March 24th, 2009 at 7:39 pm
This totally worked for me! Don’t be scared to try this method to jailbreak your iphone. The hardest part was the timing in step 9 – the tricky part. Took me 3 tries but it does work! I am loving this iphone even more now!
March 24th, 2009 at 9:33 pm
Yes. Exactly. It worked the first time for me, but I’ve jailbroken two previous OS builds. The “tricky part” with pressing the Home, then combo Home/Power buttons, then Home only again is not always exactly as many seconds as it says. If you know what to listen for, the device will “tell you” when you can “let go”
March 24th, 2009 at 11:05 pm
I have iphone 1st generation which is 8GB, I bought it from iphone store in New York, later I unlocked it for all networks, please let me know if it has 3G option, I am not sure, now I am willing to use for down loading data and e-mails, I am not sure if it could work or not. I also have fear if it could be locked during updating by itune then how can can I unlock it? I will appreciate if you could guide me & help me!
March 25th, 2009 at 12:32 am
Hi everyone I just bought the iPhone maybe three weeks ago and have wanted to jailbreak it ever since. But I was reluctant to do so because of so many complaints I saw on different blogs about people’s phones failing. Well I followed the steps above and was able to succeed, I did make sure though that all my data was backed up on iTunes in case anything did happen. So far it has been one day and the phone is working perfectly. If anything does happen I will post up again. I just want people to realize that if they follow the instructions on here and on quickpwn they will be able to succeed in jailbreaking their phone. Good Luck.
March 25th, 2009 at 12:34 am
Oh and in case anyone is interested, I was working on Windows XP SP3 while doing the jailbreak.
March 25th, 2009 at 12:56 am
i just jailbroke my iphone and it said it was rebooting and its like it just keeps restarting and it wont go off the apple screen like when you turn it on and it will come up on itunes but i have a passcode on it and it says i have to type it in on the iphone but i cant because its stuck on the screen where its just the apple can anyone help
March 25th, 2009 at 2:53 am
ifti: No, what you have is the original iPhone, which is EDGE-only, or 2G. It does not have a 3G option.
I have a new one for sale, by the way, if you’re interested.
March 25th, 2009 at 5:20 am
My Itunes sais that my Iphone have a password and my iphone dosnt restart
March 25th, 2009 at 1:58 pm
no i have the white iphone 3g
March 25th, 2009 at 3:16 pm
I have a 3G but I don’t know if I can jailbreak after update from 2.2 to 2.2.1, Can anybody advise me to know if it is possible?
I appreciate,
BB
March 25th, 2009 at 4:20 pm
Hey..does this ispw update the baseband of the iphone 3g?
March 25th, 2009 at 6:56 pm
What you mean? it is autentically a 3G iphone, 2.2 version. I am not sure if I can jail break once I update to 2.2.1, that is my question. Any kelp?
March 25th, 2009 at 9:12 pm
So, i did this jail and everything went fine. but the phone keeps on telling me “different sim detected” and when i connect it to itunes it says that the sim isnt supported… did i miss something or do something wrong?
please help a guy who isnt very technical!
March 25th, 2009 at 9:34 pm
if it help, i have the 3G 16 gig, 2.2.1
March 25th, 2009 at 11:34 pm
so i tried to jailbreak my iphone 3g I was in 2.2.1 installed qucikpwn and got stuck at pineapple screen, tried to reinstall this time with the apple logo instead and got the same stuck on apple so I did the power off hold power/home and once apple appears release power and hold home to restore via itunes, it starts to restore but then says iphone failed to restore itunes cannot restore, what should I do? I think i lost all my photos contacts music apps? please help
March 26th, 2009 at 8:40 am
How do I unlock my 3g iphone to use different service providers? anyone can help? I’ve used pwn and it worked. But I’d like to change my provider so any thoughts on this?
Tons of thanks in advance.!
March 26th, 2009 at 12:13 pm
How do I unlock my iphone 3g? will this ispw update the baseband to 2.30.3 ? Or will it stay 2.28.0! By the way my iphone 3g 16 gigs white is currently on ispw 2.2.01 and it wont allow me to creat my own firmware. Anyhelp guys?
Thanks
March 26th, 2009 at 3:37 pm
I jailbreaked my 3g firmware 2.2.1 phone with no probs at all, began to enjoy all the benefits… then found my “phone” function was greyed out and inoperable. It seems my iPhone had become an iTouch !! I have re-installed original firmware and it is working fine in its factory condition now. Anyone know what went wrong?? Could it be that I am in the UK where the iPhone is designed to work on the UK based “O2″ network? Thanks in advance.
March 26th, 2009 at 8:04 pm
I jailbreaked my 3G without problem 2 weeks ago . since yesterday cycoder dosn´t work . i ve reinstalled but i didn´t work . please help me Thanks
March 26th, 2009 at 10:05 pm
Oh my gosh. that was wat easy, now how do i get the video cam on my phone?
March 26th, 2009 at 11:53 pm
I jailbroke my phone from this site and it was really easy. I then started to install a bunch of apps, BUT now after rebooting it will not start up again. It gets to the pass code screen but will not allow me to do anything. It keeps restarting itself every 10 min’s. I tryed hard booting but still the same. Anyone know what could be wrong and how to fix this problem?? please help
Pb
March 27th, 2009 at 9:16 am
Hi,
I have the same problem with freezing logo (apple or pineapple). Besides, Iphone doesn’t appear in Itunes as well- so I can’t restore. If anybody would help I would be really thankfull. you can email tomas.lapka@yahoo.com
March 27th, 2009 at 2:27 pm
hey i got a new iphone 3g version 2.2.1……….how can i unlock it and start using it….anybody can help pls… would be grateful u can mail me on kushal316@hotmail.com pls pls pls help
March 27th, 2009 at 3:02 pm
okay no such reply, i restored my iphone and lost all contacts photos songs apps ect, so i figured mine as well jailbreak to see if i can use diskaid to bring back my contacts so i’m jailbroken with no numbers all for some **** streaming videos i could get before I jailbroke, I was thinking i could watch flash and other video files which i should be able to and can but can’t with the video out and thats the only point, i jailbroke to make my $50 tv out cable worthwhile only to find out I can’t use the tv and now i’ve lost all of my information, what a waste, i wish i just kept things how they where,
March 27th, 2009 at 3:35 pm
I just followed the steps and i too have the freezing logo problem, and i cant restore on itunes…. please please help, westonkarlcooper@yahoo.com
March 27th, 2009 at 11:55 pm
I did mine yesterday with this method. After being on the apple logo for 2 hours and it keep going on and off and vibrating I was like **** this and closed the quickpwn screen and turned off the phone. Turned it back on and opened iTunes to just restore to my last sync. The phone turned on fine and I saw Cydia and Installer were there and it was jailbroken. Messed around with Winterboard and other apps and just decided it wasn’t worth it to void the warranty and **** if something happened. I restored it fine and am happy with the regular old iPhone.
March 28th, 2009 at 12:00 am
i got my iphone bj few day ago it find and very thing work good but can get the installer and i try redo over few time but still not. can anybody help thank you dz3c0n@yahoo.com
March 28th, 2009 at 12:23 am
I went through the process and it said it was successful, but it hung on the pineapple logo and wouldn’t boot. Every so often it buzzed twice but that was all. I tried using iTunes to restore but it wouldn’t recognize the iPhone. I had resigned myself to the thought that I had bricked it when iTunes suddenly recognized the iPhone and started trying to sync it. I quickly hit Restore and it tried to do a backup, gave me some errors, and then lo and behold it said the sync was complete, and my iPhone was alive and had Cydia and Installer on it. I don’t know what went wrong or how it resolved itself, but it scared the **** out of me and I wouldn’t do it again. This process is not as bulletproof as the docs make it sound.
March 28th, 2009 at 2:32 am
i feel like i got a problem at the process of “wait for ur iphone to connect in recovery mode…”
How long do i have to wait?? it takes too much time so i think it is not going to continue working anymore??
please help
March 29th, 2009 at 6:34 am
is it right that my iphone when rebooting is taking a long time????
March 29th, 2009 at 8:06 am
very nice tutorial, it worked exactly how it said, little messed up of holding buttons, its too quick, but it gave me second chance and i could able to do it, now i have a jail broken phone, thanks to the team who did this.
March 30th, 2009 at 10:51 am
All went well, very easy instructions, JailBreak successful> HOWEVER> I am unable to launch my Phone app, I am able to make calls using contacts, etc but cannot hangup as I am unable to launch the UI for phone. Any Help will be appreciated, extending my Iphones features is great but losing the basic phone feature is another. Thanks
March 31st, 2009 at 4:49 pm
I successfully jail broke my phone. I want to install Flash Player, but I am not having any luck. =( Please Help… Thanks
March 31st, 2009 at 4:53 pm
Will not take 2.2.1 from 2.2????
Currently running 2.2(5G77), Modem Firmware (02.28.00). I’ve jailbroken many of iphones, so this ain’t my first rodeo. Downloaded both the windows quickpwn and ipsw 2.2.1. Launched quickpwn and ran thru the entire process 2 full times. I’m still on 2.2 with the same modem firmware. Hello? what the heck is going on here?
March 31st, 2009 at 4:58 pm
By the way, the only way to NOT update your baseband is to use the PwnageTool 2.2.1 for Mac OS X. I would not trust ANYTHING else. The PwnageTool will not update your baseband allowing you to use YellowSn0w. You can take the factory ipws that iTunes downloads for you and just point the PwnageTool at that file.
go here: http://www.iphonehacks.com/2008/11/jailbreakunlock.html
March 31st, 2009 at 8:13 pm
after you go through the process how long should it take the phone to reboot itself
March 31st, 2009 at 10:04 pm
After completion, it is still stuck on the screen with the pineapple that replaced the apple. Nothing else.
March 31st, 2009 at 10:27 pm
How long is this process after rebooting
March 31st, 2009 at 11:14 pm
i have an iphone 3g and it is not activated yet. i used quickpwn and it ask me for firmware 2.2.1.. i dont have a provider sim to activate the phone. question is will i be able to bypass the activation screen using this tutorial?
April 1st, 2009 at 2:37 am
i jailbroke my iphone 3g on 2.2.1 and it ses at the end wait for it to reboot in its new modified state but its just stuk on the apple logo what can i do???
April 1st, 2009 at 9:37 am
after JB, i put in my sim card, but can’t connect the sim card at all – now the phone totally no signal.
any bros out there can help?
April 1st, 2009 at 3:04 pm
hi when i get to the stage where i search for the firmware i manage to search but i have dowwnloaded over 4 now and non of them seem to work and the big green tick doesnt come up any help please would be apreciated
April 1st, 2009 at 3:05 pm
ohh and my email is anders2k6@hotmail.com for above letter please send to there
April 2nd, 2009 at 1:43 pm
ok! this wase nice!
April 2nd, 2009 at 1:45 pm
thank you for the easy steps!
April 3rd, 2009 at 2:46 am
Can you use this jailbreaking if you have your phone unlocked by a turbo sim?
April 3rd, 2009 at 8:19 pm
Well i have already break an iphone.. by updating the baseband to 02.30.. i wont do that mistake again everyone be ware.. who doesnt use AT&T .. Dont update your iphone to firmware 2.2.1 because it cant be unlocked yet!!!!! well we are waiting for Dev team ..to unlock the 2.2.1 ver..
April 5th, 2009 at 10:09 pm
My 3G runs Safari. How do I (being totally new to the whole iphone thing) switch to say windows explorer or one that I can actually look at the websites that I want to look at!! Thank ya
April 6th, 2009 at 7:51 pm
i jailbroke my iphone 3g on 2.2.1 and it ses at the end wait for it to reboot in its new modified state but its just stuk on the apple logo what can i do??? but i stay in japan and here dont have atet. please i need help because i cant use my iphone now,,,
April 7th, 2009 at 10:30 pm
i have the same problem as maike! what do i do for it to work?
April 8th, 2009 at 11:57 am
I just jailbroke my brand new 3g US iPhone yesterday ! Everything seemed fine,. except I tried some of my app store applications. Got the usual programs starting then closing scenario it did this to the main phone application! some jailbroke apps good but none that really made me think it’s worth the main phone app not working (why is that?) .anyway thanks again like everything and the how to step by step, will try again soon when I’ve a weekend free. Any ideas on what might have been the problem with the main phone app would be appreciated… great work, perfect tool… lets get it sorted so we can open this baby up for everything (like true file sharing)
April 8th, 2009 at 5:23 pm
Worked great! Thanks!
April 9th, 2009 at 9:58 am
i have a same problem as maike and gp. what would i do.. plss help!!!
April 9th, 2009 at 6:04 pm
i jailbreak my iphone but it does not read my sim card even thought my service is at&t. Can any one help me
April 10th, 2009 at 11:54 am
hey i had bought the 3g iphone but is 2.2.1 5h i want 2 know if i can still unlock it plz thank you…
April 10th, 2009 at 3:01 pm
im trying to JB my 3G and ive followed all the steps..but im now stuck on the step that says “Preparing your device.” “Wait for your iPhone to connect in recovery mode.” and its been on this screen for 45 minutes now..please helpp
April 10th, 2009 at 7:23 pm
can someone please list the apple and itunes related things that would show in task manager
April 10th, 2009 at 9:42 pm
PLEASEE help quickpwn is not reading my iphone whyyyyy it took me all day to get this program to work with all the .net programs please help
April 11th, 2009 at 10:14 pm
when i try to open pwnage it says “error -43:a file could not be found (pwnagetool_2.2.5.dmg.smi
April 13th, 2009 at 1:58 pm
uhm when i’m following the steps when i hold down home for 30seconds i get an error? help ? D:
April 14th, 2009 at 8:46 pm
yo i just finally got this to work . I have an AT&T version 2.2.1 iphone and wanted to use tmobile simcard. It didnt work at first, but finally worked. Follow instructions as well as post #137, that post fixed it for me. I think the problem I had was restoring the updated itunes software with the old AT&T simcard in. DONT DO THAT THE SIM MUST BE OUT. google how to put the phone in recovery mode if you cant get itunes to read your phone without the simcard. (I just had it hooked up to itunes and was on the restore page and then took the sim out and only the phone screen changed to emergency mode but itunes restore wokred). Immediately after the restore was complete and the phone was booting up I unplugged it and then let it boot, which went to the emergency call screen. From there put the simcard in which you are trying to use in. Then open the QUICKPWN program and then go through it. Bam thats what solved my problem hope it helps.
April 14th, 2009 at 8:52 pm
CORRECTION **** apparently the post # 137 that i was talking about is now gone or has changed, but anyways follow what I said above if you have problems. FYI i was stuck in emergency mode on my first attempt but it read my simcard as tmobile and i could send and receive calls, but then I restored as said above without the simcard and immediately closed itunes and unplugged the phone while it was about to boot up. Then I clicked all apps. on the quickpwn and held the buttons down for how long it said ( I actually counted the last step and let go of the home button after it stopped counting down with you because it stopped on 22 seconds and then went to the next step so I just kept holding the home button in and counted down still then let go) yeayea hope it helps
April 15th, 2009 at 12:59 am
when i plug in my device once im to that beginning part of the tutorial. a dialog box pops up and says ‘this version of quickpwn can only jailbreak devices with version 2.0″ what gives? is this because of the new agreement laws for third party apps? if so this blows!
April 15th, 2009 at 7:56 am
hi
when i try to install Quickpwn i am geting bellow error msg.
0xc0000135
April 15th, 2009 at 11:47 am
hi guys, ive managed to jailbreak my 3g phone 2.2.1, 2nights back.installed some jb & apple store apps.tonight however, I cant launch the apple store apps, i can launch the jb swares and can make calls. please advice..
April 15th, 2009 at 12:26 pm
Hi anyone! I need help! really think i’ve done my iphone 3g over for good! i jailbroke it as instructed and then i got stuck with the pineapple logo and nothing is loading. I cant restore with itunes either because when i load it up it says my iphone requires me to enter my password before it links with it. I assume this is my lock code, but how the hell am i meant to enter it when the phone wont turn on!!!!!!!!!!!!PLEASE HELP I AM STUCK!!!!!!!!!!!!!!!!!!!!!!!
lewismaxwellford@yahoo.co.uk
April 15th, 2009 at 12:40 pm
lewismaxwellford@yahoo.co.uk
April 15th, 2009 at 12:41 pm
for some reason the underscores aren’t appearing in my email…….its lewis(underscore)maxwell(underscore)ford@yahoo.co.uk
April 15th, 2009 at 5:31 pm
Hey there. I just followed this tutorial and used QuickPwn to jailbreak my iPod Touch 1st Generation (2.2.1 firmware). The first time I tried to put it into DFU mode, I didn’t hold the home button for long enough, so it told me I had my iPod in the wrong mode. I did it again, and it worked. It installed everything, went through the pineapple in a jogging suit thing, and then said it was rebooting. And it still is rebooting, 15 minutes later. It’s currently in my Belkin iPod Dock, which does have a steady connection to my computer. It does the normal reboot, registers with my computer, then a little white flash, then back to the boot screen. And then the same thing happens again. Ideas, help? Thanks.
April 15th, 2009 at 9:16 pm
Not worth your time. I tried this on my windows xp this morning. Frozen on the apple since. FINALLY after hours upon hours of trial and failure, I got my iphone 3g into recovery mode. Then, it bricked and shut down COMPLETELY again. After another hour of messing around, I got it all to work, now in the process of restoring from back-up. Not worth the trouble, I reccomend staying with what you have. Not worth it. In addition to that, im not a tech-moron, I am an expert graphic designer, programmer, and coding expert. I’ve never dealt with such a pain in the *** experience like this.
April 15th, 2009 at 9:23 pm
INSTRUCTIONS for anyone with the Frozen at Pineapple/Apple logo. (MAC)
Get your phone on (pineapple/apple logo)
Turn it off by holding power/home for 10 seconds, LET GO IMMEDIATELY after it turns off.
Leave the phone alone for 6-8 HOURS
Open up iTunes(6-8 hours later)
Connect iPhone via USB
Hold power/home until it turns on
IMMEDIATELY let go of power and HOLD home for as long as it takes for you to reach the “Steve Jobs” screen (I dont know if this will be the same if you have the apple logo, it may be the connect to itunes, Im not sure, but for pineapple this is what will show.)
Here is where you NEED patience.
Wait for iTunes to recognize your phone, let EVERYTHING load, dont rush or anything.
After it is all loaded, locate your 2.2.1 firmware download (you should have it if you previously tried jailbreaking…duh)
Hold Option (alt) and press restore.
Select the 2.2.1 firmware
Restore as you would on any other occasion.
Hope this helped, any other questions?
Email Brett.E.Greenberg@Gmail.Com
April 16th, 2009 at 3:07 am
sorry to ask but cant find any IPSW file once i unzip the 2.2.1 firmware IPSW, only .dmg files? please someone help
April 16th, 2009 at 3:09 am
I had my phone stuck on the pineapple for ages but i sorted by doing the following:
I connected my phone via usb and loaded itunes. It wouldnt connect at first and kept giving me error messages. I needed to reboot it but it wouldnt let me. To overcome this, i put the phone in DFU mode. To do this you need to hold the home and on/off key down untill it turns off, then continue to hold the home button. I did this and the phone flashed white, then itunes offerd the re-boot to factory settings. Seems as it was fixed but had nothing on it worth losing, i attempted jailbrerak again, opting without the pineapple logos, and it worked just fine. no problems yet
April 16th, 2009 at 4:11 am
where can i download the ipsw file, all the firware i downloaded are for mac
April 16th, 2009 at 12:19 pm
is the possibility great that the iphone doesn’t work? thank you in advance.
April 16th, 2009 at 2:24 pm
in the ninth point, I no longer continue. for me is that I had a bad / faulty connection. I came to the conclusion, (five seconds before the run) then came the error. I hope someone can help me.
I have a swiss iphone 3G (firmware 2.2.1).
April 17th, 2009 at 4:15 pm
i just took all the steps to jailbreaking my iphone 3g and i successfully completed the process, but my phone has been showing only the quickpwn pineapple for ten minutes now. after it said to wait for it to reboot in its new state. is this typical??
April 18th, 2009 at 2:04 am
Worked! Fantastic NO issues. Thanks so much!
April 19th, 2009 at 9:52 am
Wow this was extremely easy. Alot of my co-workers and now me have gone through this process. And I love it as much as them. Thanks a million. Later.
April 19th, 2009 at 2:44 pm
please where can i download the ipsw file for windows, not mac!!
April 19th, 2009 at 3:09 pm
please help my question is simple, but nobody answers me i bought my iphone on 2.2.1 software and 02.30.03 modem already installed so where can i find the ipsw file when asked by quickpwn?
April 19th, 2009 at 5:00 pm
well i found the solution for windows user…just rename the zip extension to ipsw…
April 19th, 2009 at 11:45 pm
this worked perfecly at the end when it reboots it stuffed up for me on the first time but i tried it again and when the apple logo came up i just left it and it worked perfectly whooooo XD
April 21st, 2009 at 10:09 pm
i did what the instructions you have given on how to jaikbreak the iphone 3g… and it works …. but one problem is it sayss “no service” or ” no network” please HELP whats my best option. anyone!!! i just upgraded it to 2.2.1 from 2.2.0.
April 22nd, 2009 at 1:56 pm
I HAD TO RESTORE MY IPHONE NOW I WANNA JAILBREAK IT AGAIN CAN U PLEASE HELP WHEN I RUN QUICK PAWN ITS SAYS FIRM WIRE ERROR STRING WHAT SHOULD I DO?? PLEASE HELP ME
April 22nd, 2009 at 2:53 pm
hi i jailbroken my iphone 2G with firmware 2.1 using QuickPawn. It worked well and everything is sorted except i cant use some other network simcard even though i used the unlock option of QuickPawn and it given me the message of successfully installed
April 23rd, 2009 at 12:23 pm
the quick pwn program couldnt load because of a .net framework initialization error. i dont know what that means. can someone please tell me.
April 24th, 2009 at 4:01 pm
I have an unlocked iphone, using turbosim, and I have succesfully jailbroken my phone, but it has now become locked and will not recognise my sim. Not sure what will be the best way, and help please? Running 3g 16gb, 2.2.1 firmware Thanks
April 24th, 2009 at 8:41 pm
I have an Iphone 3g (16GB) and downloaded everything correctly. It jailbroke fine and when it was rebooting, it is frozen on the pineapple. I have no idea how to fix this, if there is any way please let me know
April 26th, 2009 at 5:52 am
I did everything per instructions and my Iphone is stuck on the pineapple logo and itunes don’t recognize it. I tried a reset but is not working, I thing I lost it. Please help!!
April 26th, 2009 at 6:18 am
Thanks to entry 454 I was able to restore my iphone to factory settings. Did the jailbreak again and it worked. I reccomend you back up your iphone, restore it factory settings and then jailbreak, that way the initial reboot won’t take hours (I left mine more than 7 hours and didn’t work never got it back).
April 26th, 2009 at 3:02 pm
472 pucho i had same problem but opened quickpwn again to re-try putting the firmware on and my phone decided to boot up after an hour of the apple logo
April 27th, 2009 at 7:57 pm
My iphone stays at the pwnage symbol at startup, it just stays there, black screen and the pineapple symbol. Can anyone help me?
April 29th, 2009 at 3:53 am
Hello, can any one tell me. I Jawbreak my iphone and then when i restore it in Itunes, it lock again. So How can i do this..? And which is the option button ? as it say press Option and then press OK to restore. and it will ask for the Frameware file. so what is it ?
THanks
April 29th, 2009 at 9:30 am
Hello, I upgraded my iphone to os 3.0 and when I restore it to 2.2.1 and jailbreaked it does not recognise any mobile network.
What’s the problem?
Thanks
April 29th, 2009 at 12:47 pm
1st time kept getting stuck at the browsing for firmware stage. 2nd time worked a treat… just tried the whole process from scratch and done and dusted within 20 mins… sweet
April 29th, 2009 at 5:48 pm
if you jailbreak your iphone 3g and for some reason you have to send it into apple for servicing, what happens. If the phone is still under warranty or you have the protection plan, is all of that voided if the phone is jailbroken? Or can you just restore it and they wouldnt know the difference. thanks
April 30th, 2009 at 3:05 am
can any one pls help me how to find out whether my phone is 1g,2g or 3g pls?? m a dumbo:-)
April 30th, 2009 at 3:06 pm
Heyyaaa .. Just did the jailbreak ,, Wondering how long it will take for the startup screen to go away ??? Cuz its been there 4 a few mins but the phone did vibrate twice..??? How long will it take??
April 30th, 2009 at 3:37 pm
The startup screen still there (has been 4 bout 15 mins so far??) IM SCARED MY IPHONE WONT WORK ANYMORE!!??? :’(
plz help
April 30th, 2009 at 3:47 pm
restarted without any sim in and still wouldent load up… how long will this take??? will my iphone ever work again ?? PLEASE tell me im scared its not going to work again!!!????
April 30th, 2009 at 4:03 pm
my iphone keeps vibrating twice every 5 mins??? :’( PLLLLZZ HELP!!!
April 30th, 2009 at 4:24 pm
still on home screen!??? OMG why did i do this now i have no iphone ! WIll I EVER GET IT BACK??? Please somebody help me!??? PLEASE I WANT MY IPHONE
April 30th, 2009 at 7:37 pm
I just jailbreaked my phone and everything works fine expect for the calling. When I make a call, there is no phone screen. It is just the home screen and a green bar at the top saying touch to return to call. Even when i press it, it doesn’t do anything. Also, I can’t use the “phone” button. The dial pad comes up, but I can’t press any numbers and I get kicked out shortly after. I’ve tried turning my phone off and back on but no luck. Any help?
April 30th, 2009 at 10:05 pm
i need to know how to get out of jail break
May 1st, 2009 at 1:18 am
Hey Can anybody tell me how to fix your iphone if youve jailbroken it at the apple start screen will dont go away??? It just stays there till the power runs out and vibrates allot?? Help..?
May 1st, 2009 at 5:34 am
I just jailbroke my phone and lost evrything that was already on my iphone. how do i retrieve it?
May 1st, 2009 at 9:36 am
Great ,, it works 4 every1 else and it kills my iphone ! how do i fix it?? Someone?
May 1st, 2009 at 11:12 am
Hey ..! Good instructions . = ) Just one thing, can i unlock my iphone 3g using this .? Or does this just jailbreak?
May 1st, 2009 at 5:07 pm
I just Jailbroke my iphone and the cops showed up at my house, is there a problem…? (oh, and i got a boner right when they handcuffed me)
May 1st, 2009 at 5:08 pm
sory that was my older brother…
May 1st, 2009 at 7:14 pm
i would also like a answer to question #490 could someone please answer it because i dotn want to jailbreak my iphone and have to restore it because its not unlocked
May 2nd, 2009 at 7:53 am
hey i have a big problem ive tried this 3 times now but everytime when everything is instaled and my iphone is rebooting it stays on the reboot screen for like 30 mins and keeps vibrating evry couple of minutes…what am i to do?
May 2nd, 2009 at 10:50 am
I downloaded the apps but the quickpwn will not open. It just gives me an ignorant windows error that says: “the application failed to initialize.” blah blah Any help or suggestions???
May 2nd, 2009 at 2:43 pm
i have the same problem as #476…i restored my phone to 2.2.1 after i had 3.0 and now when i jailbreak it doesnt recognize my cell carrier (not unlocked…still att)
May 2nd, 2009 at 4:33 pm
when i do step 5 it does not let me continue can anyone help me
May 3rd, 2009 at 3:18 am
hey, my iPhone 3G is stuck at the startup screen(the one with the apple logo). What should i do?
May 3rd, 2009 at 3:19 am
Same problem as #494
May 3rd, 2009 at 3:42 am
cant even connect to itunes to restore. help please..
May 3rd, 2009 at 4:52 am
WTH HAVE TO REBOOT
HAVENT EVEN SYNC GAHHHH DAMN PISSED.
May 3rd, 2009 at 4:52 am
GAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
May 3rd, 2009 at 11:38 am
It would be really great if QuickPWN would not crash on me every time I try to do this. After I get through the pushing the buttons section it says that it has encountered a problem.
May 3rd, 2009 at 3:06 pm
the link for quickpwn doesnt work :[
May 4th, 2009 at 1:33 am
QuickPwn doesnt work.
May 5th, 2009 at 2:02 pm
hey guy..i finish all the info u teach now my phone got problem. only one apple on the screen now..go to itunes cant detect my iphone also…help!!! any guy teach me at msn pls!…MSN:yanglj_99@hotmail.com
May 5th, 2009 at 9:39 pm
I just jailbroke my Iphone 3G but at the very end when it was restarting it froze. Did it actually freeze or is it just going to take a long time to start up again.
May 6th, 2009 at 1:25 am
can anyone teach me how to restore my 3G iphone firware 2.2.1 to it’s original state before i jailbreak?
May 6th, 2009 at 10:26 am
The iPhone 3g 2.2.1 IPSW file is a winrar zip file, so the quickpwn program will not load it. When i unrar the file it becomes alot of folders and files and not a ipsw file. What to do? I have tried downloading a similar ipsw (custom made) file from another place, but then quickpwn sais it doe snot match any firmware version quickpwn supports,even though the file is supposed to nbe for 2.2.1. Isa you might deduce from the above, I am a total newbie at this, Please help :-S
May 6th, 2009 at 6:45 pm
Everytime I click on the Quickpwn icon to open it, I get a notice saying that quickpwn has encountered a problem and has to close. what can I do to get it to run like in step 2?
May 7th, 2009 at 7:28 am
After following the steps, my phone is supposed to be rebooted. but instead, only the apple icon appears at the center. I tried on/offing the phone but after that, only the apple icon appears and not the menu. please help me
May 7th, 2009 at 8:16 am
I dont know why but my iphone wont be detected by my itunes either. i want to restore it back but it wont happen. any help?
May 7th, 2009 at 11:46 am
I have successfully did jail breaking but i am not able to use other sim cards. can u plz help me
May 8th, 2009 at 12:54 am
Hi guys, can anyone tell me after jailbreaking can it perform COPY, CUT AND PASTE on email, notes and SMS, just like the OS 3.0? Your soonest reply will be appreciated.
May 8th, 2009 at 5:23 am
Ok, so I jailbroke my phone and it all went fine and I got the last screen and the pineapple message and all that and now I’m waiting for it to reboot. It keeps vibrating every 2 to 3 minutes or so and all I have is the pineapple logo (I changed my boot logo). How long before it starts up?
May 9th, 2009 at 11:47 am
Hey guys, im trying to jailbreak my iphone. I have got the iphone 3G which was bought a month ago brand new from carphone warehouse so it already has the 2.2.1 (5H11) firmware on it already with the 02.30.03 baseband!
I have downloaded the required files and following the instructions as provided.
Although when I get to step where I select the IPSW in QuickPWN, it can’t find it! the file is there… even when I do a restore in itunes by holding select and clicking restore it still wont find it.
It downloaded as a ZIP file and it doesnt have the .zip ext on the end of the file! I’m really struggling
any ideas?
Thank you
May 9th, 2009 at 2:05 pm
What a great walkthrough. Thank you.
Hey, if you re-write, you may want to warn the reader before they initiate the key sequence, that that they will be expected to start holding buttons without an intervening prompt. It caught me off guard and I had to do a hard reset and start over.
Best, Andy
May 9th, 2009 at 3:41 pm
Okay! everything went smooth, inserted by Tmobile SIM. Only emergency calls are allowed… detected different SIM…
I don’t think it unlocked
May 9th, 2009 at 5:07 pm
I am trying to jailbreak my Iphone 3G with 2.2.1 firmware and i cannot find a 2.2.1 firmware download that isnt in winrar format. My phone was already updated when i purchased it. So I dont have a copy of it in my itunes folder.please help
May 9th, 2009 at 10:27 pm
Am real keen to jailbreak my iphone 3G. Am just worried about stuffing it up. Currently downloading the latest version of itunes. is version 8 and 8.1.1 the same thing. cheers appreciate your help
May 10th, 2009 at 1:33 pm
i went through the jailbreaking fast and everything seemed to work but now after its all done and did a restart it seems to be taking a long time to go through with the reboot and have been waiting around ten minutes to start…someone with a quick comment please
May 11th, 2009 at 7:42 pm
i have done the jailbreak it said it worked succesfully but when it rebooted it has stayed on the apple simble for like 30 minutes help please
May 11th, 2009 at 7:54 pm
email response to nathan_1009@hotmail.com
May 12th, 2009 at 1:09 pm
Is anyone able to jail break and unlock 2.2.1 ? Looking at recent comment its seems that all failed. I want to jailbreak and unlock my new iphone. Please suggest.
May 12th, 2009 at 11:39 pm
Is itunes 8.02 strictly required for this, or may you use a later version? (I have version 8.1.1.10)
May 13th, 2009 at 8:06 pm
i have done the jailbreak it said it worked succesfully but when it rebooted it has stayed on the apple simble for like 30 minutes help please
May 14th, 2009 at 6:17 am
It has dies now – stuck with Apple Icon on the screen – HELP!!!!
May 14th, 2009 at 1:01 pm
Hi! I’ve tried to jailbreak my iPhone 3G 2.2.1 and everything was great except for the fact that after finishing the installation it restarted itself over and over again for almost an hour and I had to restore it with iTunes. I tried again twice but it just won’t start, it’s allways stuck with the apple logo. Any help plz?
May 15th, 2009 at 6:38 am
Does Jailbreaking mean I can “unlock” my iPhone so I can insert any SIM card from any phone company?
May 15th, 2009 at 11:19 am
same here!! im looking forward to unlock my iphone 3g!! not just jailbreaking!! PLS HELP… ITS URGENT!!
May 15th, 2009 at 2:14 pm
i lost my camera app after jailbraking icon and app how can i have it back?
May 15th, 2009 at 3:02 pm
If you are trying to jailbreak using Windows Vista you might need to restart your computer every time before you jailbreak. This is the only way i could get quickpwn to work
May 15th, 2009 at 9:42 pm
I did everything but impossible to have camera back The icon and program is gone ……
What to do?
May 16th, 2009 at 10:05 am
my phone cannot recover from the jailbreak how do i get it to recover.
May 16th, 2009 at 10:31 am
hi everyone i really need some hlpe,i got my iphone 3g in another conutry but i live in italy..i did the jailbreak and now is jailbroken but i still can’t use any italian sim it,plz i need some hlpe av tried all sims but it wont work…any hlpe??
May 17th, 2009 at 12:03 am
If you are on the iphone 3g 2.2.1, and you can’t get past the apple logo upon completion, restore your iphone by opening itunes, then hold down the Home button for 5 seconds, then hold the power button until it turns off. Let go of just the power button, then press the power button again (while still holding the Home button) and iTunes will eventually recognize that it’s in “Restore Mode” and you can restore from backup. (If you have one). This will take a while.
Now to attempt QuickPWN again correctly, realize that they left out the first step in the program. Open iTunes, click on your phone on the left, hold the shift button down, and click the Restore button. This will open a file browser where you can select the newly downloaded iPhone1,22.2.15H11_Restore.ipsw. Restore to this file. This is an important step because it starts the iphone from scratch. At the end when it prompts to restore service to the phone click yes. Then, open QuickPWN and browse to the same Restore file. When running QuickPWN 2.2.5 or 2.2.1 it will close iTunes. This is okay, don’t worry about it. When it gets to the third step and asks you to hold down for 30 seconds, really hold down for 30 seconds. Don’t let go when it moves down to the next process. Still count down from where it leaves off to zero, then let go. Let it do it’s thing. You should only have to wait about a couple of minutes for it to finish completely. If it sits on the apple or pineapple logo for more than 5 minutes it didn’t work and try again.
May 17th, 2009 at 3:34 am
i just wanted to say that i got my iphone 3g 2.30.03 phone unlocked and every thing and it is not working with all the programs and my not AT&T sim
May 17th, 2009 at 5:31 am
It can’t find the ipsw
May 17th, 2009 at 8:30 am
but i cant get in to itunes because i have a passcode on it
May 17th, 2009 at 5:02 pm
just finished the jailbreaking process in 10 mins. great install with very clear instructions. thanks for the post jeremy, and the team that made this possible. great work guys.
May 18th, 2009 at 1:04 am
hey i have a big problem ,it stays on the reboot screen for like 30 mins and keeps vibrating evry couple of minutes…what am i to do?
May 18th, 2009 at 11:48 am
I am probably being a complete noob here, but I understand what to do with QuickPwn225-2, but what do I do with the restore.ipsw that also has a ownload link in this tutorial? Your help and patience will be greatly appreciated. Thx
May 18th, 2009 at 11:54 am
think I just sussed it, D’OH! sorry.
May 18th, 2009 at 2:24 pm
i have downloaded the programe correctly and follow the steps but when i opened cydia it post me “HOST UNREACHABLE” AND INSTALLER DID NOT GIVE ME ANY APPS …. ALTHOUGH IT WAS DOWNLOADED SUCCESSFULY ..plzzzz reply quciklyyyy ANYONE
May 18th, 2009 at 7:28 pm
I have jailbreak the phone. Now I have the pineapple log but my phone is not rebooting. Anyone can help & guide me how to reinstead to original setting?
May 19th, 2009 at 1:18 am
Seriously…is it worth it? NO! I was scammed into buying this **** at $24.99 and then found out it is FREEWARE! After I followed everything correctly to set it up, it did NOT work!! The screen hung for an hour before I realised it fu**ed up my iPhone! Now I’ve had to restore everything to factory settings and LOST all my music, photographs and apps. This page should be taken down to avoid losses by other users! I’m claiming my money back through PayPal dispute! What a complete RIP OFF!!
May 19th, 2009 at 2:55 am
Hi, I have iphone 3g FW: 2.2.0 and already jailbreak. After i install some application from Cydia, I cannot sync with iTunes ( V: 8.1.1) anymore. the Dispay said: “The sim card inserted in this Iphone does not appear to be supported” Any one can help me, to make iTunes work properly? Please send email to: salehdaulay@yahoo.com
May 19th, 2009 at 9:24 am
i hv an iphone 3g with firmware 2.2.1, modem firmware 02.30.03 and bootloader 6.40, will this jailbreak work for me? if no then pls suggest any other way to get it unlock rather then the turbo sim.
May 19th, 2009 at 5:44 pm
good work its working fine for me
May 19th, 2009 at 11:18 pm
I went to all the procedures. it worked but when I put an AT&T sim card the phone is not working. what can I do?
May 19th, 2009 at 11:39 pm
So, yeah i followed the directions, really easy. THough once it started to reboot, it locked up on the apple icon. SO im restoring it now but im wondering if i should try it again or if i try again, would it work? please send me help, or advice please. Thank you
May 20th, 2009 at 1:53 pm
I went to all the procedures. it worked but when I put an AT&T sim card the phone is not working. what can I do? Could anyone help?
May 20th, 2009 at 8:22 pm
It worked perfect for me thanks
May 21st, 2009 at 11:50 am
With Iphone 3G 2.2.1 on Vista I can’t even get past device detection… I plug in USB when prompted but get nothing. Any ideas?
May 21st, 2009 at 10:24 pm
after it did its thing on the comuper and it said just to wait till its done restoring to its modded state, its been showing the little pineapple thing for soo long, did i do something wrong?
May 22nd, 2009 at 12:13 pm
Hi All, desperate here. I tried to jailbreak my friends iphone 3G but forgot to take the lock code off the iphone. Now when I try to run itunes I get the message “cannot use itunes as the iphone is lock.” also when I try to run QuickPWN I get the message ” This version of QuickPWN can only jailbreak devices with versions >= 2.0. ??? Now the iphone is frozen with the apple logo and won’t go any further. please help asap. Thanks
May 22nd, 2009 at 12:27 pm
It’s Awsome !!!!
May 22nd, 2009 at 1:28 pm
After I jailbreak my iPhone is not recognized by iTune at times. My iPhone doesnt get fully charge when I’m using my usb port. I researched on the net and its talkin about something about libusb, what is libusb and how important is that? Can anyone help me understand how to get my usb port to recognize my iPhone and how to get my iPhone fully charge after you jailbreak it. Thanks…
May 23rd, 2009 at 2:18 am
I’m just wondering if anyone can help me i jailbreak my iphoen the first time and it worked perfect and then i dropped it in a cup of water oops!! but i got another iphone and when i did i tried to jailbreak it and it froze up on me and it broke i really want to jail break it again but i am afraid it will do the same thing is there something different i need to do i have 2.2.1 any help would be great thank you
May 23rd, 2009 at 6:46 am
how long does the reboot last
May 23rd, 2009 at 4:33 pm
I followed the steps up to the part where I am supposed to locate the firmware inside the Pwnage folder yet It will not recognize the file. I re downloaded the files and confirmed I am using all the file versions specified yet I cant get quickpwn to locate the file. Any ideas? Im sure this is something small Im missing but let me know if anyone knows what it may be. Thanks.
May 24th, 2009 at 11:58 am
I tryed jailbreaking twice today and each time it just stays on the apple/pineapple logo for ages! how long does it normally stay on the logo?? All it does is vibrate a few times and flash,but dosnt start up as normal. Ive now resored my phone – which is a pain in the ***. PLEASE ANSWER FOR ME….
sneaky634@aol.com
May 24th, 2009 at 2:18 pm
how many games is it supose to be on cydia and installer?
May 25th, 2009 at 12:10 pm
I have the exact same thing happening – - any help? Im on my third try!
I tryed jailbreaking twice today and each time it just stays on the apple/pineapple logo for ages! how long does it normally stay on the logo?? All it does is vibrate a few times and flash,but dosnt start up as normal. Ive now resored my phone – which is a pain in the ***. PLEASE ANSWER FOR ME….
May 25th, 2009 at 10:17 pm
my dad is really paranoid about me jailbreaking my phone…does the warranty really void? and if i restore it does it unvoid (not even sure thats a term)
May 26th, 2009 at 9:21 am
Hi i open pwnage but i get to step five and when i hit browse and open the pwnage folder there is nothing in there wat do i do?
May 26th, 2009 at 12:01 pm
my bludy iphone has broke thanks alot
May 27th, 2009 at 6:09 am
This did not work first time round for me. However I restored my iPhone then did it a second time and worked fine.
May 28th, 2009 at 8:45 am
I did this successfully and everything was going great until I realized I have no safari. Is this bad? Or is it supposed to take it off? How am I supposed to use the internet then? Thanks!!
May 29th, 2009 at 5:03 pm
I did everything step by step everything works fine but when I try to install a app to my iPhone it says iTunes cannot read that file any ideas why?
May 29th, 2009 at 5:23 pm
so if i jailbreak my iphone now and the iphone 3.0 software comes out in july i will be able to restore my iphone and download the software????????????
May 30th, 2009 at 12:56 pm
i got through the whole process up to when the apple logo goes away and then the apple sign shows up. but then it just stays on the apple logo. once in a while it will flash and then the logo will reappear but it doesnt load into the icons. how long should this take?
May 30th, 2009 at 10:02 pm
@Tony #485 – I had the same problem as you (not being able to dial out or “touch to return to call”). I uninstalled “Kate” and my phone now works properly. I know I’m late with the response and my solution may not even help, but I thought I’d post it just in case.
May 31st, 2009 at 11:13 pm
I just download quick pwn and 3g 2.2.1 IPSW FIRMWARE.. then I unzip the quick pwn.. I can’t launch the quick pwn.. any idea?? I’m using Window XP My is Canada I phone 3G w/ Fido, shouldn’t be a problem right?
June 1st, 2009 at 8:03 am
can anyone tell me how long it will take the apple logo appear in my screen after jailbreaking it? thanks in advance!
June 1st, 2009 at 11:21 pm
after downloading, the 2.2.1 firmware IPSW file is not in the folder after downloading, just a bunch of unopenable .dmg files, this obliviously results in quickpwn not being able to open the IPSW. anyone having the same problem?
June 2nd, 2009 at 4:46 am
when i open the QuickPwn it said “The application failed to initialize properly (0xc0000135). Click on OK to terminate the application” then it terminates … i can’t open it for the 1st step … please show me how to fix this error ….
June 2nd, 2009 at 5:15 am
oh finally i fix it with .Net Framework …:D well done ..
thannks alot
June 2nd, 2009 at 7:58 am
Hey guys, I have same probelm as Daniel.. couldn’t launch the QuickPwn.. anybody can help??
June 2nd, 2009 at 10:42 am
Can anyone help please? I have successfully unlocked my iphone 16gb 3g but I am still getting an invalid sim error on my phone. What do I need to do next so that my phone will work with t-mobile.
June 3rd, 2009 at 12:49 pm
to Frank,
I had the same problem, Im assuming you’ve used yellowsn0w…make sure your SIM pin code is off otherwise it wont work
June 3rd, 2009 at 9:24 pm
it world and now my screen is just the black background wiht the silver pineapple. help???
June 4th, 2009 at 2:47 pm
I followed the directions to a “T” and it seemed to work fine but the first app I downloaded put my phone itno a loop that turns it on for about 1 to 2 minutes and then shuts it off, I can’t restore it in I tunes or anything, it just restarts and is stuck in this loop, any ideas or suggestions????
June 4th, 2009 at 7:23 pm
I jailbreaked my ipod yesterday but i dont think it worked it did say that it was successful but the pineapple logo has been there for the longest time…i even left it all night and i see no advance to it…it is stuck to dfu mode and when i tried to restore everything back to normal…the ipod wont appear on itunes..i dont know what to do…plz someone help how can i make my ipod work again!!!!
June 4th, 2009 at 9:48 pm
Just for general info, ive struggled to get this to work, it all loads fine, and as the phone tries to reboot after jailbreaking it just freezes. I tried to plug it into itunes and it would pick the phone up, however i figured out if you start i tunes and press the same button pattern on the instructions, itunes will pick your phone up and restore it to its previos state, hope this helps.
June 5th, 2009 at 2:56 am
The second download will not download what is going on??
June 5th, 2009 at 5:32 pm
got same problem as Jason.
ipsw file is not inside firmware zip file. couple folders and some other files but no ipsw file.
help?
June 5th, 2009 at 5:47 pm
ok so i downloaded like 10 different iPhone1,22.2.15H11_Restore.zip files from various websites. they are all 246 MB and none of them have the ipsw file. am i missing something in the directions? is it in one of those dmg files?
in other words, WTF?!
June 5th, 2009 at 10:47 pm
This tutorial seems to be for Mac’s. Am I wrong. Can I uste this tutorial for Windows XP sp2?
June 6th, 2009 at 7:44 pm
Are u sure this jailbreaking software wont screw up my iphone 3g. will this work
June 7th, 2009 at 11:13 am
man thank u so much for all.ive jailbreaked my iphone 3g,16gb,,and its working just fine.thankz
June 7th, 2009 at 11:58 pm
I did everything as explained. when i get to the part where i have to put the firmware in, i put it in and it does not verify it for me! Can someone help me please???
June 8th, 2009 at 9:27 am
I have downloaded everything and the download went through fine, but now it is stuck on the apple logo, it shuts on and off but then goes right back to the apple logo. I had a passcode to open my phone originally, therefore I am not sure if this has anything to do with it, but when I went on to Itunes to try and restore, it stated that my phone has a passcode to unlock, but because my phone is frozen on the apple logo, i don’t even have the option to unlock my phone, therefore not even Itunes will recognize my phone where I can do a restore…PLEASE HELP!
June 8th, 2009 at 6:59 pm
does it take VERYYYYYYYYYYYYYYYY long to download the second file or its just me?????
June 8th, 2009 at 11:09 pm
Thank you very much for this. I went through lots of steps over and over again but this one REALLY worked.
Now I just have to figure out how to unlock my iphone. I can google it anyway.
THANK YOU MUCH.
June 9th, 2009 at 2:25 pm
I got to the “verify still connected” when Quickpwn crashed. Started again and in the same spot it did it again but this time the Iphone screen showed an Itunes icon and a usb lead but nothing happened, I needed to restore – could someone tell me what happened and how to get around this please? Thanx
June 9th, 2009 at 6:01 pm
536 has good info if you’re stuck with constant re-boots after the jail break process.
I tried, did the jail break and got stuck at the end. PILE OF ****! I had to restore and loose all my data.
Thanks!
June 10th, 2009 at 12:10 pm
Is it supposed to take a while for the program to put it in recovery mode?
June 10th, 2009 at 3:45 pm
One thing the guide doesn’t mention. If you have a pass code you must disable before the jail breaking. It will make things much easier for you.
June 10th, 2009 at 6:30 pm
Umm, I have a question. After you do all of the stuff it says, how long does it take for the iphone to reboot itself?? I just finished jailbreaking my iphone, but it is taking quite a long time for it to reboot itself. Is that normal?
June 10th, 2009 at 8:31 pm
thx sooooo much this really worked
June 11th, 2009 at 8:23 am
I got to the “verify still connected” bit when Quickpwn crashed. I started it all again and in the same spot Quickpwn did it again but this time the Iphone screen showed an Itunes icon and a usb lead but nothing else happened, I needed to restore – could someone tell me what happened and how to get around this please? Thanx
June 11th, 2009 at 3:25 pm
I have been researching jailbreaking for quite some time now and i have seen more people with issues here recently than i have seen in a long time. Think i am going to wait until 3.0 comes out in a week, then wait until app is updated or created to jailbreak it…
June 12th, 2009 at 9:19 pm
What do I do if i get the error message: Your device has connected to the wrong mode. This can be caused by incorrect following of the instructions or a faulty USB connection. Please Try again
Thanks
June 13th, 2009 at 3:35 am
Please Help – I have done all of the steps above, then when it says you have sucessfully jailbroken your iPhone, please wait for it to restart with the new modded software(somewhere along those lines…)and then it wont stop what i think looks as to it restarting itself over and over. Also it never leaves the boot screen. then i tried it again to see if i did something wrong and this message showed up – “This version of QuickPwn can only jailbreak devices with versions >=2.0.”. And when I go to iTunes to see if it’s connected properly, it says it can’t access it because of it being locked, when in fact it hasn’t left the boot screen in the past hour.
June 14th, 2009 at 3:27 pm
I get to the second step and double-click on the pineapple and I get a QuickPwn.exe – must first install .NET Framework:v2.0.50727
And I have had all the trouble in the world. Anyone know what I’m talking about or encounter this problem? any help would be greatly appreciated.
June 14th, 2009 at 9:26 pm
I had just attempted to jailbreak my phone. I followed the directions exactly and I had made sure all the programs were up to date. The download said it was a success and that it needed to reboot for me to enoy the phone. Trouble is the phone can no longer reboot, it is currently stuck on the apple logo start up screen. Does anyone know how to fix this? please email me if you do, I feel like I have just ruined my phone. I cant even restore my iphone because an error message comes up saying it cannot connect. please help~!!!
June 14th, 2009 at 10:10 pm
TO ANYONE WHO IS GOING TO ATTEMPT TO DO THIS, I STRONGLY URGE YOU TO UNDERSTAND AND KNOW WHAT YOU ARE DOING BECAUSE YOU CAN RUIN YOUR PHONE IF YOU DONT DO IT RIGHT! I ATTEMPTED IT AND WAS UNABLE TO HAVE MY PHONE BOOT BACK UP ONCE THE DOWNLOAD WAS COMPLETE. IT TOOK FOREVER TO FIGURE OUT HOW TO HAVE MY COMPUTER TO RECOGNIZE THE PHONE WITHOUT ITUNES FREEZING BEFORE IT COULD BE RESTORED.
BEWARE.
June 15th, 2009 at 12:11 am
PLEASE HELP!
I jailbroke my 2G iPhone already and inserted my AT&T GoPhone SIM card afterwards. But I have no signals yet. Somebody please help!!!
June 15th, 2009 at 12:50 am
i can not open qwicpwn after i downloaded it. it says orror initalizeing. i restarted and re downloaded but nothing
June 15th, 2009 at 12:52 am
runnig windows xp
June 15th, 2009 at 10:38 am
I’ve just tried it and now I’m left with just a pineapple on my screen and it won’t do nothing else :s Any suggestions ???
June 15th, 2009 at 6:28 pm
how long does it take for the iphone 3g to go into recovery mode?
June 15th, 2009 at 8:00 pm
To get the Iphone back into recovery mode simply follow the steps you had used to get it into recovery mode in the first place (IE holding the buttons down for 5 the 30 seconds then letting go of the power button but keeping the home button down). Doing this will allow your Iphone to be recognized by itunes again so you will be able to restore it. (this is for people who had the same problem as me with having their phone stay on the boot up screen for hours).
as for people thinking of jailbreaking their phone, I suggest waiting until firmware 3.0 comes out as the trouble you are going through now might not matter because your jailbreaked applications may not work with the new software. I would wait it out…
for the people running XP and other successful jailbroken apps…how did you successfully do it while others (like myself) have failed?
June 16th, 2009 at 10:39 am
not that I mean when you are ay the screen with the instructions but ir says to wait for your phone to connect into recovery mode… I’m wondering how long that takes..
June 16th, 2009 at 11:34 am
umm i just jailbroke my iphone and it was pretty easy but after it was all dont and still now my phone is just black with the apple in the middle and i tried hooking it up to my computer and nothing happens and i cant cut it on or offf it just stays like that . is this supposed to be this way or what should i do please write me back cause i need help?
June 16th, 2009 at 3:11 pm
step 6 is not working for me. i try doing 1_2.2.1 and i put it in and it doesnt do the checkmark please help!
June 16th, 2009 at 8:19 pm
i’m having problem getting past the part where you hold down the buttons is there a trick to it or am i suposed to wait for it?
June 16th, 2009 at 9:59 pm
hey wats up …. y isnt there the unlock option for the 3g like there is the original…. does it just automatically unlock it as well plz email me the ans
June 16th, 2009 at 10:06 pm
my email is bobbycrocker40@yahoo.com
June 16th, 2009 at 10:41 pm
so i tried this for my 3g and it says that my fimware doesnt match what i downloaded. my modem firmware is 02.30.03. any suggestions?
June 18th, 2009 at 9:37 am
I have the 3g iphone, I have at&t service but I also have tmobile service what I want to know is will be able to get my phone unlocked for tmobile cause my at&t plan don’t support the I phone any moor anybody please let me know
June 18th, 2009 at 2:16 pm
so when i download 2.2.1 firmware and QuickPwn and get to step 5 in the tutorial my computer cant find the ipsw file ‘firmware bundle’ wat do i do :”(
June 18th, 2009 at 10:40 pm
I just tried to jail break and when I did launch of the Quickpwn i get an error message that says i need to install the version of the net framwork. Does anyone know what that means???? please help
kasey.0211@yahoo.com
June 19th, 2009 at 12:09 pm
if you care about your iphone DO NOT USE THIS SOFWARE it fucked up mine and now its frizen at the boot logo thanks a lot u stupid quickpwn
June 19th, 2009 at 11:10 pm
can anyone tell me how to unlock my i phone 2.2.1 i have successfully completed the jailbreak process and i have vista. Too much confusing information out there.
June 20th, 2009 at 10:44 am
i got thru everything fine i been waiting ten min. for the phone to connect in recovery mode, is it suppose to take this long
June 22nd, 2009 at 6:30 pm
hii i buy iphone 3g version 2.2.1 and ths is locked ,,, is nybdy hav idea hw i unlock ths iphone ,,or is it possible to unlock iphone with my self ,,,, i dnt wanna spent mre 50 pound to unlock it,,,,
June 22nd, 2009 at 9:39 pm
Hi, I tried all the steps given in this site… at the end I was waiting for my iPhone to reboot.. it has never rebooted. I just see pine apple logo on my iPhone 3g 2.2.1. Please help to fix this problem or let me know how to undo it.
June 23rd, 2009 at 1:49 pm
Dont try any of the winpwn…quickpwn…. all r waste of time…. The only best solution is downloading REDSNOW application from dev blog website and follow d instructions…
It can successfully jailbreak the phone in few minutes… I tried 4 other solutions for nearly 9 hrs and found this one and dis s sucessfull one.. Easily jailbreak..
Ur comments pls…
July 3rd, 2009 at 12:29 pm
dude worked, too bad installer is down forever though. will its apps be avalliable ever again on a different installing app. e.g cydia, icy ????
July 4th, 2009 at 6:36 am
I did all the steps but when i got to the firmware part i couldn’t find it. I downloaded the firmware like half a million times and i still can’t find it. Can you tell me what i am doing wrong?
July 6th, 2009 at 3:53 am
hello, what do i do if i only downloaded 2 of them , the blue & purple one. do i need the other one? & if soo how do i get it?
July 7th, 2009 at 11:22 am
hey,um what does jailbreaking mean? i dont understand? and will you get in truoble for it? & what does it do for me?
July 15th, 2009 at 12:45 pm
how long do i have 2 wait in recovery mode?
July 17th, 2009 at 1:08 am
PLEASE HELPPP……..
When having step# 6. Firmware Verification, I got message:
“TheIPSW file you selected (iPhone1,22.2.1) does not match the firmware versino of your device (iPhone1,23.0). Please note that QuickPwn does not upgrade your firmware, it only jailbreaks whatever firmware you currently have on your device.”
PLEASE HELP….
July 19th, 2009 at 7:08 pm
The only question I have, while all this seems really simple is, will this work with AT&T users? I’ve read there are special ways to do it if you are. Supposedly you can’t do it the normal way. As this true? I ask only because I have heard people will jailbreak and then not get any service after the break. If I do have a problem, do I just restore from itunes? Thanks alot guys.
July 22nd, 2009 at 5:45 am
i have jail broken my iphone but now it wont charge can someone plz help as to why it wont?
July 27th, 2009 at 11:32 pm
ok i have an important question before i try this whole jailbreaking thing. i just bought my iPhone while on vacation here in FL and i plan on jailbreaking my phone on this computer and I’m going back home in a few days. When I hook my jailbroken iphone up to my computer at home will anything go wrong? also i don’t have itunes on my computer at home. haha i’m new to all things iPhone. Any help or advice is appreciated. Thanks in advance ;]
-emma
July 30th, 2009 at 3:31 am
I JUST WENT THRU ALL THE steps with my 3g 3.0 iphone and its at the recovery screen and its purple? whats wrong???
July 30th, 2009 at 4:24 am
@kevin er… it says for iphone 3g 2.2.1
July 30th, 2009 at 4:29 am
um i extracted the ifone firmware compressed thingy but i cant find the actual firmware file any suggestions?
thnx in advance
-da spaz
August 1st, 2009 at 5:47 pm
Just tried to jailbreak my iphone and it goes to emergency calls only. When I press the arrow at the bottom of the screen it sends me to a purple screen with USB attachment. When I tried to connect to itunes it stated I was not a developer. Haven’t a clue what all this means and my phone does not work. Despairing and seeking guidance. Andy cheers
August 2nd, 2009 at 10:38 pm
can this be use to other country like libya? because my father will use this iphone there. looking forward for your help.. thanks!
August 3rd, 2009 at 4:24 am
Worked perfectly the first time, follow the directions make sure your version 2.2.1 with a 3G Iphone.
August 3rd, 2009 at 5:08 am
Dave is your suggestion in response to AndyG and if so how can I do this now?
August 5th, 2009 at 3:39 am
its told me to wait for my iphone to connect in recovery mode for 10 minutes now. how long does it usually take.
August 7th, 2009 at 10:32 pm
When my quickpwn searches for the frimware it says i need a firmware thats starts with iPhone 1,23.0. but the firmware i have is iPhone 1,22.2.1 so it doesnt work, why is that? :S evrything is fine except that part it doesnt let me continue cuz the quicktime says its not the correct frimware but on this site 1,2_2.2.1 is the correct one…. can anyone helppp??? please
August 10th, 2009 at 2:27 pm
will updating after jailbreak brick ur iPhone?
August 10th, 2009 at 9:14 pm
lol..DO NOT JAILBREAK YOUR IPHONE WITH THE QUICKPWN TOOL. why? heres why
i jail broke about 6 months ago,it worked perfectly, no mistakes at all, untill i tried to restore it 1 week ago for the new update of software, it completeley fucked up on me, now wen i start it, there is a cartoon dude saying something in a speech bubble thats in russian or some language with symbols ( could also be greek but im pretty sure its russian).. any ideas? i tried to re plug it back into itunes a day later, it just says iphone is in recovery mode.. i tried the hard reset aswell, to no gain, BTW its iphone 3g.. submit help pls..
thx in advance.. i probs will never find this page again lol, so email me if u find a solution to this horrid problem… Stephen.hainey@hotmail.com
thx guys n gals.
August 13th, 2009 at 1:57 pm
does it work for itouch
August 14th, 2009 at 8:35 am
Its coming up with “Firmware Error String” help?
August 20th, 2009 at 11:51 pm
How long is it supposed to take to get it into recovery mode cause im on that page but it still didnt get to the countdown where i hold the home button etc?
August 29th, 2009 at 9:25 pm
whenever i download the firmware and put in the pwnage folder, when I go to get it when restoring, it is NOT seeing the file. It downloads as a zip file and not ending is .ipsw file…how can i solve this problem? tks
September 6th, 2009 at 3:20 pm
I have the I phone 3g now updated thru I tunes with the new 3.1 software. I have installed both programs that I was instructed. I unzipped both files and then ran redsnow. This is where I’m stuck? Redsnow when I hit browse cannot find when I go to click on the iPhone1,13.07A341_Restore files any file that it will open. I have spent 4 hours today and with 2 different computers trying this but redsnow cannot find the file. Can someone Pleaseeeeee help???? What am I doing wrong?
September 21st, 2009 at 10:42 pm
I reset the phone to factory settings with nothing on the phone at all execpt for what it comes with. I went through the jail breaking process and downloaded all the necessary stuff. I went through each step and everything worked great. It rebooted fine and I can connect to wifi and use everything on the phone EXCEPT the phone. I have no signal and on the home screen there is a red dot on phone icon. How do I fix this? The phone and everything worked fine before doing this. I have seen where several people have commented on the having the same problem but I have yet to see a solution. If anyone has an idea or if someone has already posted a solution PLEASE LET ME KNOW. Thank You
September 24th, 2009 at 3:28 pm
i downloaded the windows quickpwn software to jailbreak my phone but when i try to open it it says i need to install the right .net framework i have no clue what that is and i have the 3g 3.0 iphone can you send me everything i need to jailbreak it
September 25th, 2009 at 6:03 pm
I have the same request as jeff.
September 25th, 2009 at 6:07 pm
Also, where do I find the iPhone1,2_3.0 file
September 29th, 2009 at 11:12 am
I can’t find the firmware to complete step 5. Can anyone help me out as to what the problem may be?
September 29th, 2009 at 1:43 pm
my ipod wont turn on it just comes up wiv the apple but it wont turn on help
October 2nd, 2009 at 2:56 am
Please all, I updated the i tunes and followed the steps then my i phone locked & went to the emergency mode & i can’t unlock it…
There’s also a message appears 2 me on the i tunes tells “THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED”
Can any one help me please???
October 9th, 2009 at 8:08 am
I just got my iPhone and I was wondering if this works with the 3.1 version ?
October 29th, 2009 at 12:17 pm
HELLO, I AM FROM GREECE AND HAVE JUST FINISCH JAILBRAIKING MY IPHGONE,BUT I MADE A MISTAKE(PUSHED THE HOME BUTTON OR SOMTHING I DONT REALY REMEMBER) WHEN THE REBOOT WAS STILL RUNING AND NOW MY IPHONE HAS STUCK WHITH THE SYMBOLE OF THE APPLE AND DO NOTHING.CAN I SAVE IT????????????????????
October 29th, 2009 at 3:40 pm
I ALSO TRYED TO DO THE JAILBRAIK AGAIN BUT THIS TIME I HAVE DONE NO MISTAKES AND THE SAME THING HAPEND