How to: Jailbreak/Unlock Your 1st Generation iPhone 2.1 - Windows PC Edition
Disclaimer - Neither TiPb nor I take any responsibility for any problems/issues/bricking/etc. that may occur while using this software to modify your iPhone. Please be aware of what you are doing.
It was not long ago that we filled you in on the steps to take in order to jailbreak your iPhone 3G on Mac OS X as well as a Windows PC. Well today TiPb is proud to present a step by step guide to not only jailbreak your first generation iPhone 2G but to unlock it while jailbreaking. This is for Windows PC’s only.
So if you are against AT&T in the US, or simply need to run your original iPhone on an international carrier like Rogers in Canada or any GSM/EDGE network around the world, then please read on after the jump!
This guide will show you how to jailbreak/unlock the original iPhone 2G only, not the iPhone 3G. Some important notes before we begin: You must have iTunes 8 installed and you must be on firmware 2.1, if you are not, be sure to update via iTunes. Also make sure to go into the task manager and disable ANYTHING Apple or iTunes related.
1. Get the tools.
Once you are positive you are running the 2.1 on your iPhone and have iTunes 8 installed it’s time to get the tools you will need. Create a folder on your desktop named “Pwnage”, then download the following files into that folder:
Unzip the QuickPwn21-1.zip file inside the Pwnage folder.
2. Launch QuickPwn 2.1
Simply click on the pineapple from the Pwnage folder you created on your desktop.
3. Connect your iPhone
Connect your iPhone via USB to your computer and click the blue arrow to continue.
4. Locate Firmware
Now we have to click the browse button to locate your iPhone firmware.
5. Selecting the 2.1 firmware IPSW
Select the 2.1 firmware IPSW file from the Pwnage folder you created on your desktop then select the IPSW file and click the open button.
6. Firmware Verification
QuickPwn will now verify you have selected the correct firmware. After it is verified click the blue arrow to continue.
7. Customize your firmware
This step allows you select what you’d like installed on your iPhone. You have the ability to select Cydia, Installer, replace boot logos, and unlock your device. Once you have made your selections click the blue arrow to continue on. If you want a full jailbreaking experience, installing Cydia and Installer is highly recommended.
8. Bootloader Files
You will now be prompted to select your bootloader files that I instructed you to download a few minutes ago. Click on the Browse button and select the 3.9 bootloader from the Pwnage folder you created on your desktop. Repeat this for the 4.6 bootloader file. Then click the blue arrow button to proceed.
9. Verify Connection
QuickPwn will noW verify that your iPhone is still connected to your PC. Again click the blue arrow to carry on forward.
10. Potential Tricky Part - Pay Attention
Ok, this part seems to give some people issues, but I assure you it does work. QuickPwn will now put your iPhone into recovery mode. When its in recovery mode you will be given directions to: Hold the Home button for 5 seconds, Hold the Home and Power buttons for 10 seconds, then release the Power button and continuing holding the Home button until your iPhone is in DFU mode.
11. Let the jailingbreaking begin - no going back now!
QuickPwn will detect your phone is in DFU mode and proceed with the jailbreaking process.
12. You are officially jailbroken - Congrats! Now Time to Unlock - Be Patient
Once jailbreaking is complete, QuickPwn will then reboot it and run BootNeuter. Let BootNeuter take over, do not interupt it. This process will take about 5 minutes. Your iPhone will reboot when it has completed and you will have a fully unlocked iPhone!
13. Setting up data connection - T-Mobile ONLY
Go into Settings, General, then Network and enter the following information.
APN: wap.voicestream.com
Username: (leave empty)
Password: (leave empty)
For other Mobile Carriers data settings check out this link.
Well that’s it folks, it’s time to start exploring this whole new world you have just opened. For answers to more of the questions you may have regarding jailbreaking please head on into our forums. There are always members of our community willing to help you out!
October 8th, 2008 at 6:07 am
Hi, this works for the 3G too, just not the SIM unlock yet, i guess those money grabbers over at iphoneunlockuk.com are finally out of business for trying to sell freely available tools
please continue with your quest for world liberation from greedy theives!
October 8th, 2008 at 1:22 pm
When I did this and installed a Tmobile sim card it stayed at the make an emergency call screen! This it said wrong sim! But here’s the thing, I could make and recieve calls but only from they emergency screen. Someone help please!
October 8th, 2008 at 7:51 pm
Do I need to unlock it or can I just Jailbreak it..?? I currently have ATT, and just want the installer…
October 9th, 2008 at 8:55 pm
WOW, Thanks alot this helped out alot everything worked just as you put it. Thanks again!!!!
October 11th, 2008 at 9:42 am
Thanks! Worked a treat. One happy unlocked iPhone user1
October 12th, 2008 at 12:04 am
I had the same issue as tewest86. I must have restored back to 2.1 native in iTunes and tried this two dozen times. I have an EDGE 8G iPhone, and haven’t had this work yet. Is there another Windows unlock tool for 2.1, or should I try to roll back to 2.0.2?
October 12th, 2008 at 12:14 am
piece of cake … thxs
October 12th, 2008 at 3:11 pm
Had same problem tewest86. I am rolling back to 2.0.2
October 13th, 2008 at 8:02 pm
When I did this and installed a At&t sim card it stayed at the make an emergency call screen! This it said wrong sim! But here’s the thing, I could make and recieve calls but only from they emergency screen. Someone help please!
October 13th, 2008 at 10:29 pm
You need to restore your iPhone to factory first before you use QuickPwn.
Insert the sim from the provider you WISH to use first.
Clear down the folder where your iTunes restore files are Should be “C:\Documents and Settings\%username%\Application Data\Apple Computer\iTunes\iPhone Software Updates” (where %username% is your PC’s profile name)
Open iTunes with the iPhone connected and hold down the ‘home’ button. iTunes should recognise an iPone is connecting in ‘restore mode’. iTunes will now download and install the latest 2.1 firmware. Let it complete this but when it is finished do nothing more than close iTunes. DO NOT ACTIVATE THE PHONE just close iTunes.
Now run QuickPwn select the newly downloaded firmware that iTunes just installed from the folder above, click on and tick all the required boxes, choose the boot file paths and click on, go through all the steps and once the phone reboots you will be active with no prompt to activate! Happy Dayzz
The crutial part is the iPhone firmware must never have been activated via iTunes in the first place otherwise it will always fail when you change SIM cards.
Hope this helps ricardo.
October 14th, 2008 at 8:16 am
101% Satisfaction
October 15th, 2008 at 7:14 pm
Unbelievable !!! It works perfectly !!!
1) Nice screens 2) Easy, very easy 3) Just follow the instructions
Put pay pall link here! I’m gonna pay for this !!!
THANKS !!!!!!!!!!!!!!!!!!!!!!!!!
October 15th, 2008 at 11:17 pm
Gr8 help..very helpful steps.. Thxs a lot..U guys r rocking…
October 15th, 2008 at 11:54 pm
What about activation. I dont have a contract with ATT so I need to activate it also.. Can you help me with that.. Thanks
October 16th, 2008 at 12:50 am
It works like a charm.
October 16th, 2008 at 6:14 pm
I need help. When i get to quickpwn and click the blue arrow it says unhandled exception has occured in your application. I still click continue and nothing happens. What do i do?
October 17th, 2008 at 8:49 am
Thanks. Worked fine.
October 17th, 2008 at 10:47 am
Just picked up a 1st gen off craigslist yesterday and jail-broke and unlocked it. Worked great. Thanks for the instructions.
October 17th, 2008 at 7:11 pm
after i jailbreak and went thru all the phases, my iphone 2.1 - could not reconized my T-MOBILE sim card , I try to do with the ATT and after with the T-mobile but keeps saying different sim card please connect to itunes; and when I connected the iphone to the computer(windows) keeps saying: the sim card inserted on this iphone does not appear to be supported(t-mobile sim card) . WHAT SHOULD I DO ??? i try to do the unlock first with the att and after w the t-mobile but doesn’t seems to wortk ??? NEED HELP PLEASE !
October 19th, 2008 at 7:07 pm
The unlock and jailbreak worked great, thank you, but I am having trouble getting it to recognize the EDGE data service. I put wap.voicestream.com into the APN line as instructed, but no dice. Anyone have any suggestions? Thanks.
October 20th, 2008 at 12:30 am
If you still cannot run T-mobile Edge service, Check out http://jbwebdev.com/blog/t-mobile-edge-stopped-working/ Basically re-install new Tzones Hack from BigBoss at Cydia
October 20th, 2008 at 6:07 pm
APN has been change to T-MOBILE customers, the new one is : internet2.voicestream.com
thank you to all
October 21st, 2008 at 12:52 pm
Weird, My first gen phone was already jailbroken and unlocked at version 2.0 I upgraded to iTunes default 2.1 before proceeding with the tutorial and the phone is only missing my Cydia/Cydia Apps (Not Jailbroken) but it is still unlocked and Im ready to make calls and didnt loose any other settings. Just an FYI for those who are in my same config and the jailbreak isnt important to you. (-:
October 21st, 2008 at 2:38 pm
Which power button is supposed to be held? The iPhone or my laptop? My computer just shuts down after 5secs.
October 21st, 2008 at 4:06 pm
hey guys it unlocked it and the top left sYS T-MOBILE WITH ME BARS butit says different sim detected and and it will only let me make emergency calls but i can call any number and recive calls did the jail break not work or what do i do plz help!
October 21st, 2008 at 4:13 pm
ok i really need help, the sim works but the phone is still locked like i cant enter the phone past the emergency olny screen its my only phone can some one please help- greatly aprectiated! thank you
October 21st, 2008 at 8:59 pm
Tried (and retried) all steps as published. I had previously 1.1.3 and upgraded it to 2.1 via itunes. After completing the jailbreak and unlock I get the emergency screen… am I missing something, appreciate if someone could respond.
October 22nd, 2008 at 10:48 am
very very very good its piss to do and works thank you so much let me buy you a drink!
October 22nd, 2008 at 7:49 pm
I wonder when somebody will figure the emergencie problem out. I
ve try to unlock my iphone so many times, and never works, I can see the tmobile sign in the up left, make and receive calls but, thats all.If somebody can help, we might need before 10/29 cuz Apple is gonna have a new version on this date!! Thanks a lot folks!
October 23rd, 2008 at 1:18 am
OMG THANK YOU! I WAS NERVOUS LIKE CRAZY BUT UR TUTORIAL WAS SO EASY!
October 24th, 2008 at 4:38 am
My iPhone stuck where Quick pwn asking to hold for 5 sec 10sec & 30 sec I have tried it 10 times but its not working for me any help will be appriciated
October 24th, 2008 at 11:17 am
I had this problem before, I was not following the instruction properly. You have to follow it carefully. (I used the MAC version). Ready means “do not touch the buttons yet”
October 25th, 2008 at 1:25 am
do you know of a software that will enable youtube and safari to work after you have jailbroken and unlocked the iPhone?
October 25th, 2008 at 5:07 pm
Thanks a ton. I was about to throw my I phone. After updating and jailbreaking as per ur guidelines everything is fine. My syncing problems too sorted out.If you guys are coming to dubai please send me a mail for a party. Once again thank you for your unconditional & unselfish help
October 25th, 2008 at 7:08 pm
Thanks a million times dude …. ur the Best…. plz recomend more stuffs to make iphone better….:) …
October 25th, 2008 at 7:39 pm
hey guys, People having problem with TMOBILE check this link and do the last step with AT&T sim card. then switch to TMOBILE sim and do the above steps. This solved my issue
October 26th, 2008 at 4:14 am
went the various steps and things worked as expected. I started having a problem however. The phone would freeze and reboot again and again. Whenever I try downloading and application or calling someone, the phone would reboot. Please help with this problem?
October 26th, 2008 at 6:45 am
Great! Works perfectly for me … Thanks for the tutorial!
October 27th, 2008 at 1:34 am
I jailbroke my iphone 2G, first I did it without the T-mobile sim card in place and then with the sim card in, but it still gives me the same error, “Different sim detected, Please connect to iTunes”, When I connect to itunes, it says, “The sim card is not supported”, I can receive and make phone calls. Does anyone know how this could be solved??
October 27th, 2008 at 6:43 pm
Guys all the way from Guatemala, Central America… This worked awesome, eternally greatful!
October 28th, 2008 at 7:48 am
I had already tried 3 other methods I found on the internet and my son’s friend (who’s supposed to be an iphone guru) tried it too with no success. I did exactly as you said to do and followed all your directions and it was a total success!!! Thank you guys so much!!! I installed a T-mobile sim card works great!!!
October 29th, 2008 at 5:25 pm
i have a problem after the 7th step. it sais that there is a problem with the application… do you have any idea what am i doing wrong?
October 29th, 2008 at 8:46 pm
So, do you put the SIM card you want into your iPhone before you do this? after? in between? not matter?
October 29th, 2008 at 10:31 pm
I have tryed to do this over and over again but it is stuck on the emergency call screen. I have AT&T but can not get the iphone plan. I just dont have the internet. It will make calls from the emergency screen. Someone please help!
October 31st, 2008 at 1:19 am
I myself have the iPhone 3G I used winpen2.5, noticed it only jailbroke my phone how do I go about unlocking it also and when do I have to insert the tmobile sim card before or after I start using quickpwn? And where can I get the little needle tool to pop out the apple/AT&T simcard??? Thank you
October 31st, 2008 at 10:32 am
DUDE.. if we do this to get the 2.1, can we call and also have itunes apps at the same time? CUZ INSTALLER APPS SUCKS!!! please tell me
October 31st, 2008 at 3:40 pm
thank you so much… its my first time using the iphone and everything was so easy!
November 1st, 2008 at 12:53 am
WOW! i have tried MANY(!) other attempts to jailbreak with other things and other versions of quickpwn. i even followed videos of people on youtube and NONE worked. THANKS!!!!!!!
November 1st, 2008 at 12:54 am
oh…. i typed that when it was just turning back on, and now it is stuck at the pineapple. What is wrong?
November 1st, 2008 at 5:10 pm
i did jailbreak now how i can use my sim in iphone 3g… b’coz its showning no sim or no service…. can anyone help out to sort out this problem…. i need to unlock iphoen 3g to make call
November 2nd, 2008 at 6:41 am
http://tobicom.digcre.de/2008/09/15/anleitung-iphone-firmware-unlock-jailbreak/
November 2nd, 2008 at 9:40 am
Hi,
i´ve got the German Version for this. If somebody need´s it in German language.
NVONATIQ
November 2nd, 2008 at 5:16 pm
Worked like a charm. I used my sim card for my ATT prepaid phone. Works perfectly!! THANKS!!!
November 2nd, 2008 at 10:22 pm
I’m havin the same problem as JOSH it keeps sayin unhandled exception and i’ve restored my iPhone…PLEASE HELP ME I NEED THIS PHONE UNLOCKED!!!!1
November 3rd, 2008 at 10:26 pm
damn guys im really pissed off !!! i tried this methods almost over 4 times and not only with this method but with many others that i found in the internet and none seems to work !!!!! im really pissed offff i want to unlock my iphone but damn there’s simply no way !! i have the 2.1 ,,, after the prosedures it gets locked at the emergency screen!!!
November 3rd, 2008 at 11:26 pm
does anyone know if the t-zones plan for T-mobile is just as good as the 20 dollar plan? Can I still get my email with it?
Also I found that first restoring the phone on Itunes and then using that image to pwn it worked after using the file here did not.
Rock on
Tom
November 4th, 2008 at 1:11 pm
i am using the tzones $5.99 one and it works ok.. but better with wi-fi.
November 4th, 2008 at 1:13 pm
I have to re-unlock and re-jailbreak phone.. will this work even if it was already jailbroke/unlocked? I am already on 2.1 firmware..just want to make sure this is the correct tool.. I bought my phone already unlocked etc. my data is showing up as all orange and itunes says it cannot read my phone anymore.. so wanted to check before I do a restore ..thanks
November 5th, 2008 at 12:33 pm
this step by step tutorial worked perfectly. great screen shots guys and so easy to understand. everything works.. calls, features AND tzones. thanks again!
November 5th, 2008 at 2:16 pm
One question, does the EDGE service from tmobile work free? or do I have to pay the 5.99 plan?
November 6th, 2008 at 12:56 am
Comment number 10 is a must read. It should be step #1 in the unlocking process. Thanks Clever!
November 6th, 2008 at 2:39 pm
Thanks so much. This worked like a charm. You guys rock!
November 6th, 2008 at 11:13 pm
When I did this and installed a Tmobile sim card it stayed at the make an emergency call screen! This it said wrong sim! But here’s the thing, I could make and recieve calls but only from they emergency screen. Someone help please!
November 7th, 2008 at 4:35 am
I unlock my phone thanks! But I have a problem, it wont let me go onine, cant use youtube, no itunes, no maps, im using a T-mobile sim card.. Am I doing somrthing wrong here? How can I get Wifi turn on?
November 7th, 2008 at 9:45 am
I have tried this method for so many times and still works ! The best method ever .
November 7th, 2008 at 3:01 pm
This was attempted on 5.11.2008 Hi I was using ziphone with 1.1.4 firmware and wanted to use Quickpwn 2.1. I restored my Iphone from I tunes by clicking and holding SHIFT then hitting restore in I tunes and after it rebooted it asked me to insert original sim-card. I inserted my pay as you go O2 sim-card, which it was happy with. I went to upgrade to 2.1.1 firmware but it asked me to upgrade to the latest I tunes. After updating I tunes I then uploaded the firmware 2.1.1 I then followed the procedures exactly as explained from QuickPwn, everything worked fine. It came to the end which also unlocked the phone but when putting in the unofficial sim-card, it said “Please insert original sim-card.”.
I would really appreciate any help to solve my problem.
Thanks James
November 7th, 2008 at 3:04 pm
Hi Jonathan mine does the same after what i did above
November 8th, 2008 at 12:10 pm
My anti-virus picked up a trojan from the Quickpwn file, anyone else have that problem?
November 8th, 2008 at 2:38 pm
hello thanks man.. its working
November 8th, 2008 at 2:41 pm
Yeeehhhhaa! Finally managed to unlock my iphone. Tried many times and failed. Pay attention to the step pointed out in post #10.
November 8th, 2008 at 8:41 pm
OMG THIS WORKD IM SO HAPY TY U GUYS ARE THE BEST!!!!!!!!!
November 8th, 2008 at 8:54 pm
Wow, I was gonna hack my phone the day I got it which was right when the price dropped for the first time but I decided against it waiting for the process to be perfected, and wow I can;t imagine it getting any better/easier/faster than this…Thanks
November 9th, 2008 at 6:43 am
I had a bit of a problem with the unlock procedure, but as others have said you need to use itunes update before quickpwn. {Pay attention to comment Number 10 by Clever. Cheers m8}I also did it without a sim card in and it worked. It will come up with a message saying there is no sim card but just tap the screen and it goes off. 1. Use itunes Version 8 to do the restore, clear any other update out of the itunes folder and let itunes download the file not the ispw from here
Thanks for all the help guys I now have a 2.1 iphone unlocked and jailbroken. Cheers Kev
November 9th, 2008 at 2:05 pm
Thanks, this worked like a charm!
November 9th, 2008 at 4:19 pm
this thing is just awesome man . just try it bro .its really good ,i never thought i can do this so easily u know its gr8 , u guys should try it
November 9th, 2008 at 5:48 pm
hi for some reason i dont get the
window, i have tried every thing, when i start the process i dont get the 7 and 8 it goes straight to #9, what could be the prob, pls help.
November 9th, 2008 at 6:43 pm
hey when i download the bootloaders, i try to open them and it says u can’t and windows needs to know what program created them , what do i do?
November 10th, 2008 at 5:22 am
worked wonderfully! thanks so much!
November 10th, 2008 at 8:58 am
I’ve followed the steps up to number 3, BUT QuickPwn wont detect my 2g iPhone. The blue arrow is greyed out…….HELP????
The phone has been updated from 1.1.4 to 2.1 using the custom firmware. Phone now shows the emergency call screen and iTunes says that the sim is not compatible. I wish I’d never bothered updating - can anyone help????
November 12th, 2008 at 2:58 am
AWESOME! Worked like a charm. Thanks!!!
November 12th, 2008 at 3:58 am
Worked like a charm, thanks to all the geniouses who programed this!
November 12th, 2008 at 9:57 am
I just did it, and now get the emergency screen, and I can receive and make calls (in the emergency calls screen) but nothing more. I would like to know one thing… If I restore the phone in iTunes I will get some trouble? Like killing my iPhone?
November 12th, 2008 at 12:46 pm
I was having all sorts of problems with QuickPwn - but managed to do the whole process very easily last night. What I would suggest is to put the phone into DFU restore, open iTunes and restore the firmware to the official 2.1.
Using the above tutorial, start from step 2 and make sure that you follow all the onscreen prompts. Do not disconnect the phone or dislodge the usb cable. Everything should work fine.
If you synced your phone to iTunes, before attempting the QuickPwn process iTunes will popup a dialog offering to “restore data from a backup”. You can then restore your contacts, text etc…. Some issues have been found though using this process with phones previously on 1.1.4. See how it goes………….good luck.
November 12th, 2008 at 5:22 pm
Under Settings, General, then Network all that appears is DATA Roaming, VPN, Wi-Fi. Nothing about APN. What is the solution?
November 13th, 2008 at 12:09 am
Just finished three days of forensic reading, dozens of systematic, scientific efforts, and tonight found this page. No science necessary; Just follow the instructions!! Wow, my phone works, and I am so pleased. Cash to follow. silver? good advice!!!
November 14th, 2008 at 8:35 am
Ran this program multiple times. Still saysay “no service. Can make or recieve calls. Sim card tried in another phone and works great! Help asap???????
November 14th, 2008 at 11:10 am
For those of you who has the issue with “Please insert original sim-card.” after unlocking with QuickPwn please follow comment #10 first then run QuickPwn again. This includes you guys with AT&T sim cards and pay-as-you-go sims.
I had that problem and this site helped me fix the issue. 1. Had to restore back to factory default of 2.1 2. Put my carrier’s sim card in (Tmobile). It could even be a pay-as-you-go sim 3. Ran QuickPwn again 4. Phone works now.
November 14th, 2008 at 5:29 pm
I also got my phone off craigslist and had scoped out this website knowing that i would use it to unlock my phone for t-mobile. I restored it using itunes 8 and followed the procedures but like most of the people before me, got left with the “emergency” calls only screen. I repeated the procedures about 3 times and nothing, so i decided to do the restore again and ran the applications once more and BAM there it was, up and working. For those of you who plan on following this procedure anticipate this happening to you, be patient and restore if you get the emergency message and try again. Worked for me. Thanks for all the info and help!
November 14th, 2008 at 6:29 pm
gives problem on every reboot but yeaaaa THIS IS AWSOME!!! thanks to all team members
November 14th, 2008 at 11:32 pm
Thank you so much. I have been seaching for days for an easy to undestand tutorial. Downloaded all files you specified, followed your direction EXACTLY and my first attempt at unlocking and jailbreaking went much more smoothly than I had anticipated! In about 30 minutes (including download time) I was done and using t-mobile, wi-fi worked perfectly and so far everything seems to work perfect! YOU GUYS ROCK!
November 15th, 2008 at 9:36 am
Worked without any hassles – BTW, though it says all Apple processes and services in the Windows Task Manager should be disabled (or stopped), Apple Mobile Services needs to be ON. The Pwange tool does not recognize without this services ON. I had stopped iPod services as a precaution.
Otherwise, the entire procedure seems to be seamless and thoroughly hassle free.
Actually speaking, the entire process is meant for dumbest of dummies!!!
November 16th, 2008 at 4:00 pm
I have a 2g 2.1 iphone that im trying to unlock for my mom. She has a razor with at&t and i would like to switch the sim from her razor into the iphone. I have tried to unlock it multiple times and i always get the emergency screen everyone else keeps getting. Is there something I could possibley be doing wrong? Do I leave her sim card in there right after i restore the iphone?
November 17th, 2008 at 9:01 pm
I was afraid to upgrade my 1.1.4 firmware to 2.1 because i didn’t know if i would be able to unlock the phone. so i tried this process on a buddies, and sure enough it worked perfectly for him. now its my turn. thank you!!!
November 18th, 2008 at 4:13 am
This is fantastic. I have been stuck with a dead phone for over a week! the secret is to pay attention to comment #10! Thank you!!
November 18th, 2008 at 6:43 pm
It keeps saying my usb was interupted. please help! followed the instructions to a T
November 19th, 2008 at 6:26 am
works perfectly! im on optus prepaid (australia). i was scared to put my sim in before unlocking the phone, but i did and nothing happened. i just lost all my contacts and msg’s etc, but that was expected, being a new phone and all. thankyou soo much! also, remember to follow cmnt #10. i didnt try it without that step first, but it worked for me with using that step, so i would recommend it.
November 19th, 2008 at 4:33 pm
hey whats up!! Im just unlocked my iphone first generation and is worked. I can use my Chilean movistar SIM. originally I get th iphone with a contract on England with O2 company, but I done it and unlock it. Th only matters now is with the phone keyboards..doesnt allow me to dial any number, when I go to trough th screen, this one appears a few second, and then goes to th main screen. I can make phone calls and received them trough my contact list, but th main phone keyboard doesnt work properly…any recommendation? thanks in advance
November 19th, 2008 at 11:48 pm
Hey, thanks a lot, I had no problems unlocking my 2gen iPhone, I use T mobile and I had no problems like other people here,maybe it got betters. Thanks again!!!
November 20th, 2008 at 1:14 am
Great!! I tried and it worked a the first try very easy to do with these tutorial thanks!!