Universal iPhone/iPod touch 3.1.2 Jailbreak Tool blackra1n for Windows Released
George Hotz, the man who brought you the jailbreak tool purplera1n, has once again impressed us all and this time it’s an all iPhone 3.1.2 jailbreak only solution, blackra1n. Mac users need not apply as blackra1n is currently a Windows only application.
So, what is blackra1n? blackra1n is a 30 second ALL device 3.1.2 jailbreak. Even the ipt3, but the ipt3 is tethered. In order to boot it, just rerun blackra1n. As far as donations go, they are much appreciated, but not until after blackra1n works for you. I never ask for donations before the tool is released.
It should be noted that 3G and 3GS unlockers should still avoid updating to 3.1.2 using iTunes as blackra1n is not capable of unlocking your device. By updating you will update your firmware baseband to a version that can not be downgraded at this time. If you are looking to unlock you need to follow the Dev Teams tools and instructions.
TiPb takes no responsibility for your jailbreak outcome. Need help? Check out our iPhone Jailbreak and Unlock forum.
October 11th, 2009 at 9:31 am
1st gen (2g) iPhone jailbroken in about 5 seconds. HOLY ****.
WOWsers.
October 11th, 2009 at 9:33 am
i need a jailbreak for ipod touch g3. any solutions yet?
October 11th, 2009 at 9:34 am
Good stuff. Turns out appuloha1l was all bs too.
October 11th, 2009 at 9:58 am
Yessssssssssss George is the best
October 11th, 2009 at 10:00 am
there is no jailbreak for ipod touch 3g yet
October 11th, 2009 at 10:00 am
blackra1n has been running on my computer for ten min. and still have not jailbroken my phone yet whats up
October 11th, 2009 at 10:08 am
@ nick mine did that too the first time. just hold down the power and home button with it plugged in until you see the apple logo and just wait for the phone to fully restart and hit make it ra1n again! thats what i had to do and wow was it fast after that!!
October 11th, 2009 at 10:18 am
If u already have a jailbroken device does it wipe out ur jailbroken apps or does it stay on the device and just upgrade the firmware??? Plz somebody comment back thanks!
October 11th, 2009 at 10:18 am
I only have access to Mac right now
For iPhone 3G and 3GS – you will not be able to unlock – correct?
October 11th, 2009 at 10:19 am
All iDevices work, though the touch 3 only boots tethered.
October 11th, 2009 at 10:19 am
@AG – I would think you use AptBackup and you’ll get them all back when you resync.
October 11th, 2009 at 10:19 am
whats battery life like after doing this. I read in the forum’s that someone converted back to non-jailbreak
October 11th, 2009 at 10:20 am
this doesnt work at all for 3.1.2 on iphone 3g
October 11th, 2009 at 10:21 am
Mine was done in less then 30 seconds. Now trying to find some new-mail.caf files so I can actually hear my email alerts.
October 11th, 2009 at 10:29 am
worked in less then 30 seconds on 3gs with 3.1.2
October 11th, 2009 at 10:30 am
Will this jailbreak my 3GS running 3.1?
October 11th, 2009 at 10:33 am
what version of itunes and windows are all you ’successful’ guys running?
October 11th, 2009 at 10:35 am
The article states “It should be noted that 3G and 3GS unlockers should still avoid updating to 3.1.2 using iTunes as blackra1n is not capable of unlocking your device.” What about 2g iphone is it capable of unlocking it?
October 11th, 2009 at 10:42 am
im used on 3gs 3.1 working perfect!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
October 11th, 2009 at 10:44 am
looks like from posts all over the place it doesn’t work on a 3G running 3.1.2
October 11th, 2009 at 10:47 am
After using blackra1n for 3.1.2 are you able to use the tethering
October 11th, 2009 at 10:48 am
It did not work on my 3.1.2 3gs
tried it 3 time already. After “make it rain” it installs iteself on the iphone and reboots with no luck!! any suggestions?
October 11th, 2009 at 11:05 am
does it unlock iPhone 1st gen…???
October 11th, 2009 at 11:12 am
DOES THIS UNLOCK AND JAILBREAK THE 2G ON 3.1.2???????
October 11th, 2009 at 11:18 am
This is the difference between dev-team stuff and geohot stuff. Geohot rushes to get stuff out and as a consequence it’s kinda flaky where dev-team stuff is usually rock solid and stupid proof. For those of you with trouble, in one of his tweets geo said something about some devices, particularly the 3g, being stubborn. My assumption is you may have to try rebooting your device then running blackra1n again, possibly several times. Also for you ipt3 people, this only works tethered, which means after you jailbreak it, you have to run blackra1n again to make it boot. So if you ever reset your device, you will need to continue using this to force it to boot or it will be bricked until you do.
October 11th, 2009 at 11:41 am
DOES THIS UNLOCK AND JAILBREAK THE 2G ON 3.1.2??????? DOES THIS UNLOCK AND JAILBREAK THE 2G ON 3.1.2??????? DOES THIS UNLOCK AND JAILBREAK THE 2G ON 3.1.2??????? DOES THIS UNLOCK AND JAILBREAK THE 2G ON 3.1.2??????? DOES THIS UNLOCK AND JAILBREAK THE 2G ON 3.1.2???????
October 11th, 2009 at 11:51 am
dev team all day baby
October 11th, 2009 at 11:51 am
@Charlieb620 – Jailbreak yes, unlock, no! If you upgrade to 3.1.2 your baseband becomes unlockable and you can’t downgrade it.
@blackra1ndidnotwork try to disable Bonjour service – that seems to be helping some people get it
October 11th, 2009 at 11:52 am
wait until the next iphone/ipod update comes out cuz its gunna be brick country for all of you
October 11th, 2009 at 12:04 pm
I dunno guys… Id better wait for dev teams solution… I only trust my iphone to them.
October 11th, 2009 at 12:06 pm
Bob, i habe the same feelings as you. Maybe better wait for jailbreak from dev-team.
October 11th, 2009 at 12:16 pm
Holy ****. That was fast AND painless.
October 11th, 2009 at 12:16 pm
@iphone4idiots how do you disable Bonjour service? wot is it? thanks for the rply
October 11th, 2009 at 12:17 pm
So how do I install cydia using this method? Also I am trying to using Appulous, but no apps are downloading, any suggestions?
October 11th, 2009 at 12:18 pm
I love all of the ‘tards on all these sites asking over and over again if this unlocks iPhone 3.1.2. Learn how to read.
October 11th, 2009 at 12:18 pm
Would you trust your iphone to this program? You guy’s need to wait for the DEV-TEAM release. Even if it does work you have to ask yourself one question: “Would you want a picture of this butt ugly dude on your iphone”? I didn’t think so !!!
October 11th, 2009 at 12:19 pm
Not even going to try it, I’ll wait for the devteam solution.
As for all of you asking about unlocks, etc, RTFM!
October 11th, 2009 at 12:26 pm
@iPhone4idots thanks
October 11th, 2009 at 12:28 pm
Soooooo does this jailbreak work for iPhone 3Gs running 3.1 an 3.1.2?? Idc about unlocking I just want it jailbroken
October 11th, 2009 at 12:31 pm
@charlieb620 try taking 32 seconds out of your life and read the article…
October 11th, 2009 at 12:42 pm
It doesn’t work at all. Hell, Antivirus nails it as a threat. Disable antivirus and it crashes. Well done George. This isn’t nearly up to par of your other projects.
October 11th, 2009 at 12:55 pm
@blackra1ndidnotwork I have no idea what it is, but just try it Run > MSCONFIG > Services
RonJ I’m pretty sure Cydia is installed when blackra1n finishes. If you are trying to download to your iPhone – use Installous (Hackulo source in Cydia)
@Steven yes it will work for 3G. You upgrade to 3.1.2 (and lose your unlock) and then run blackra1n. 3G have reported been buggy (but multiple tries seem to get it eventually).
October 11th, 2009 at 1:01 pm
YES REALLY ALL THE CAPS AND YOUR TELLING ME TO TAKE TIME TO READ THE ARTICLE. WHO SITS THERE AND COUNTS QUESTION MARKS YOU ******* ******. ILL JUST WAIT FOR DEVTEAM CAUSE IM HEARING BAD FEEDBACK ON THIS ANYWAY.
October 11th, 2009 at 1:29 pm
Worked 100% for me!!! 3gs 3.1.2! So happy! Google voice here I come!!!!
October 11th, 2009 at 1:30 pm
Hey here’s the Step by step is so simple Inow my iPod 3g is jailbroken yay http://gotsight.com/archives/45
October 11th, 2009 at 1:35 pm
Wow 5 seconds is all it took after about 10 tries. Who ever said disable the bonjore service thanks cause thats what did it for me. I also updated my itunes to the latest version idk if that helped, but right after updating itunes and disabling the bonjore service it worked in 5 seconds.
October 11th, 2009 at 1:36 pm
Purplera1n was how I jailbroke my 3gs… worked perfectly. Blackra1n is how I will jailbreak, if I decide to upgrade the OS from 3.0… but I have no need to. I have everything I need now; slingbox over 3g network with 3GUnrestricter, teathering, MMS with the carrier update. I don’t need anything in 3.1.x… until I start loading apps that require 3.1x to work. Then I will trust Geohot and make it blackra1n. I see a lot of people post that they are having trouble with blackra1n, but all of the people who have had success please post too, so everyone knows George is reliable.
October 11th, 2009 at 1:36 pm
will this jailbreak my iphone 3gs with 3.1 on it
October 11th, 2009 at 1:39 pm
Will it be possible to use INTERNET TETHERING again after jailbreaking to Blackra1n???
October 11th, 2009 at 1:58 pm
hey i keep reading that you have to rerun blackra1n again to reboot the ipt3, which is what i have, but when i run it too early it just turns the screen white and when i wait a little bit it does nothing, any helP?
October 11th, 2009 at 2:00 pm
hi i bought an iphone 3sg about 2 weeks ago with 3.1 pre-installed basband 05.11,07 and locked on the o2 5.0 carrier/network which i use as my carrier so i dont need to unlock. if i jailbreak it will i loose that?? im new to jailbreaking so if some one could help it would be well appreciated.
in case your wondering about the o2 carrier its because im from ireland thanks again
please help
October 11th, 2009 at 2:16 pm
I have a 3.1 OTB from about 6 days ago. I don’t really care about unlocking my phone, I just want it jailbroken.
It literally took 30 seconds. Then it was done. Afterwards you will notice the blackra1n icon on your device. Open it up and install cydia or one of the other two.
This really could not have been any easier.
Also, AVG DID NOT detect anything wrong with the windows app. So please don’t go starting virus rumors about blackra1n.
A lot of the problems and questions that people are having would be solved if you would just take five or ten minutes and just read.
Again, this is just my experence with blackra1n on a 3.1 OTB iPhone.
October 11th, 2009 at 2:25 pm
It took me four tries for the jailbreak to work. It should only take a few seconds to work, so if you are getting stuck on the recovery screen for longer than 30 seconds just try again. It will work. Thanks so much for this it was very quick.
October 11th, 2009 at 2:30 pm
im running an iphone 3g on 3.1.2 and ive tried 8 times everyway i was told to and this blackra1n doesnt work !!!!!!!!!!!!!!!!!! please dont try this what for the dev team release or risk ruining a 2 to 3 hundred dollar investment !!!! ur iphone!!!!!
October 11th, 2009 at 2:32 pm
when i download blackra1 i receive an entry point error. Can someone assist me?
October 11th, 2009 at 2:49 pm
Worked great. I have a 32g iPhone 3gs with 3.1.2 on windows vista. So fast!
October 11th, 2009 at 3:22 pm
This guy makes the devteam look like a pathetic bunch of amateurs!! Why would I wait for their tool when they only F up my phone anyway?
Purplera1n was the BEST jailbreak tool ever released and I’ll bet this one is great as well…I’ll be using it as soon as I get home.
October 11th, 2009 at 3:26 pm
This sounds VERY stupid, but, does every jailbreak program affect the phones battery life differently depending on how it jailbreaks the phone??
October 11th, 2009 at 3:32 pm
this wont work on my 3g with 3.1.2, i have tried repeatedly, what can i do?
October 11th, 2009 at 3:56 pm
help! wen i use this on my ipod touch 2g, it gets stuck at entering recovery
October 11th, 2009 at 3:56 pm
*Windows 7 Users, run blackra1n in Compatibility Mode using Vista SP2 & as an Administrator.
Easily Jailbroke my iPhone 3G 3.1.2 on my PC (Windows 7 32-bit)
blackra1n is NOT a virus when you download from the Geo’s site directly .. only stupid people will download from another source.
October 11th, 2009 at 4:03 pm
this doesn’t seem to work for 3g with updated 3.1.2. every time i run blackra1n, it just gets stuck in either “running” or “entering recovery” with geohot’s picture never coming up. i’ve tried every which way(about 10 times now). if someone has it working for 3g, please post how you did it.
October 11th, 2009 at 4:04 pm
alisher
mine does the same thing, ive tried probably 20+ times,
October 11th, 2009 at 4:26 pm
How do you get free apps on the Ipod Touch 3g OS 3.1.2 using pc? I’ve already jailbroken it.
Thanks in advance
October 11th, 2009 at 4:30 pm
Pretty simple jailbreak. Not sure what others are doing wrong.
October 11th, 2009 at 4:54 pm
is there any way to go back if you have already updated your iphone 3g to 3.1.2 so i can jailbreak? I also updated the carrier file this week.
October 11th, 2009 at 5:22 pm
I just jailbroke my 3GS using blackrain and erupted in laughter. The program is a single executable with one button to click. The jailbreak took 20 seconds, and most of that time was the phone rebooting. Apple’s iPhone empire has been completely crumbled by a kid!
Blackrain takes jailbreaking to the mainstream, because it requires no special work. Plug in, execute, click button, done!
October 11th, 2009 at 5:52 pm
now i got it working, it took 15 seconds, but like i said ive tried it 30 times today and now it works, awesome
October 11th, 2009 at 6:00 pm
sunny,
what did you do different this time around. still not getting it to work.
October 11th, 2009 at 6:10 pm
mine keeps getting stuck on “entering recovery” iphone has the the recovery mode screen stuck and itunes keeps opening please please help me!!
October 11th, 2009 at 6:19 pm
I have my phone 3G 16Gb 3.1.2 jailbreaked right now with blackra1n on windows 7 64x, if you have problem running blackra1n just do like said before, terminate the bonjour process then run blackra1n with vista sp2 compatible mode and with administrator rights, worked well in secons for me
October 11th, 2009 at 6:24 pm
hi nox im running vista 32 should i just keep it like that and continue?
October 11th, 2009 at 6:29 pm
alisher
i didnt do anything different, i think i had itunes open even, it just worked this time and ive tried it over 30 times, i then installed cydia and icy and rock or whatever and now i have a cydia problem it says because i installed icy, so if you get it working maybe dont install icy
October 11th, 2009 at 6:31 pm
Wow, so many babies and Dev Team **** riders up in here. Like purplera1n before, this is an extremely easy jailbreak process. If it doesn’t work the first time (which it did for me) just reboot and try again. Not that difficult. Nod32 did not detect any viruses. It worked perfectly fine on my 3GS on Windows 7.
October 11th, 2009 at 6:31 pm
we need a top 10 must have JB apps thread! Make it so!
October 11th, 2009 at 6:51 pm
Dear George Hotz:
Great Jailbreak. Don’t **** it up with a creepy picture of yourself.
Love, Joe
October 11th, 2009 at 7:00 pm
scale of 1-10, this is OVER 9000!!!!!! This program is almost godly!!!! Thank you!!!
October 11th, 2009 at 7:05 pm
thank u nOx for that peace of info worked great however i have installed winterborad and a few themes the themes will show up i winerborad but will not display. anybody know how resolve this….
October 11th, 2009 at 7:28 pm
George Hotz is a loser !!! i JB my 3gs ( 3.1 – baseband 5.11.07 – bootload 6.04 ) jb in 20s but this tool is not “real” JB, he fool all of us. After jb we should easy access to file system , right ? It fast but useless, Thanks, but no thanks after jb i use pc suite, iphone browser access to file system, it said your iphone not jb. what’s up GeoHotz ? all he did is put cydia on iphone , nothing thing esle. jb mean you can install any apps, or modify file system . Dev-team do better job. what a loser Geoge Hotz
October 11th, 2009 at 7:36 pm
Blackra1ndoesntwork – ok it works for 3g . Update ur device to 3.1.2 then after that’s done reboot ur phone once . Plug in ur phone and run blackra1n. It should work I did mine on vista go to ihackintosh.com for a tutorial and tips . Geohot said if u r using windows 7 run it as vista sp2 and or admin . See my phone wouldn’t load the blackra1n program at first but when I rebooted and tried it jb’ed in a heart beat .
October 11th, 2009 at 7:39 pm
U will get blackra1n on ur device then run that to install cydia
October 11th, 2009 at 7:47 pm
Hey to that are trashing geohot and blackra1n stop it the program works fine it does what it says I have 2 iPhone 3g and 1 3gs and all are now rocking 3.1.2 and hacked!!!! And I was running vista off my dual boot macbook pro. For my 3gs i’ve been with out a hack since the last pwnge tool. Maybe the dev team should team up with geo they could be unstoppable. Anyway I’m so happy that I have my hacks back I gave a donation to the cause. Because an iPhone is not a true killer if not hacked. Thanks again geohot keep it up.
October 11th, 2009 at 7:49 pm
dont install icy or that rock ****
i had to re jb it because cydia fucked up said it was because of icy, anyways, this time i did it i had itunes open and it worked on the 5th try, i dunno if thats what needs to be done
October 11th, 2009 at 7:51 pm
@ I’m using filezilla and I can access file system. And if u don’t like the work he does don’t use it and do It ur self! Get a life!
October 11th, 2009 at 8:00 pm
Do we have a solution to Winterboard or Bosspaper etc. not working yet? Thats the only downside you cant customise.
October 11th, 2009 at 8:17 pm
Well after trying all day to get this to work on my 3Gs 3.1.2 I am giving up.
No go on parallels…
2 different windows machines=stuck in recovery mode
October 11th, 2009 at 8:19 pm
blackrain is ****. im using it as i type this and its been runnin on my computer for 5 minutes and hasnt done ****, to my 2g ipod touch. this is b.s
October 11th, 2009 at 8:27 pm
Mine says connect to itunes still (b4 i even tried to jailbreak ) (its an old phone im trying to turn into an itouch ) will this ever work for it ?
October 11th, 2009 at 8:37 pm
It took 20 second to jailbreak my 3gs 3.1.2. And everything is working including winterboard, sbsettings…. You guys got to be doing something wrong..
October 11th, 2009 at 8:40 pm
It gets me… I restarted my iPhone and as soon as I did it it said “You have jailbroken your iPhone…” but nothing happened. I prematurely restarted…. This time i’m waiting it out.
October 11th, 2009 at 8:40 pm
i had to redo mine cause of cydia problems, its 3g, and now its not working again, its hit or miss
October 11th, 2009 at 9:28 pm
ok, so ive done jb’ed it twice in the past few hours, its hit or miss when it comes to whether its gonna work or not, if the ugly guys face doesnt come up on the screen within 15 seconds, i dont think itll work, phone is a 3g, so i had the screen unlocked, itunes closed, and it worked, i dunno what else but ive done it this exact same way 15 times and it didnt work, good luck
October 11th, 2009 at 9:30 pm
Hey guys. I need your help please.. I installed blackra1n a few hours ago on my ipt 2G. When I switched on my ipt, an itunes screen appeared asking to connect to itunes. Does anyone know why?
October 11th, 2009 at 9:36 pm
It worked perfectly after rebooting but not after I switched off and on again..
October 11th, 2009 at 9:44 pm
Apparently with ipt 2g you have to run blackrain every time you restart
October 11th, 2009 at 9:49 pm
Does that mean that I have to connect my ipt to a computer and run blackrain before i can use it? Is there any other program that I can use that doesn’t need this process?
October 11th, 2009 at 11:48 pm
Those that fail to jailbreak their phones must be a bunch of stupid teens. READ THE GUIDE!!! How can you fail this? Fucktards!
October 12th, 2009 at 12:13 am
this was the easiest jailbreak i ever done great job Geo!!!!
October 12th, 2009 at 12:33 am
For those of you on the 3g running 3.1.2 and having problems, make sure your iTunes is open and then run blackra1n, I tried to run it about 15 times and as soon as I did this, it worked. Good Luck. Blackra1n is by far the fastest jailbreaking tool I’ve ever used. George outdid himself here.
October 12th, 2009 at 12:45 am
I used it on a 3gs 3.1 otb iphone and it worked perfectly the first go!
October 12th, 2009 at 12:58 am
finally got it to work on 16g 3g(3.1.2) after trying about 20 times throughout the day.
*did not run as administrator or close any processes.
October 12th, 2009 at 2:07 am
Guys.. Please see comments 93,94,95 and 96. HELP !!! ;(
October 12th, 2009 at 4:07 am
Iphone 3GS was on 3.0 firmware and report that… The **** this did not work! bricked my Iphone! just kept shutting down after to boot logo. had to update to 3.1 now I lost my tethering… Thanks allot *******! try writing some god dam compatibility instruction next time.
October 12th, 2009 at 7:09 am
Worked like a charm. 10secs. Or somewhere around there. 32gb 3gs. Upgraded from 3.0.1.
October 12th, 2009 at 7:11 am
I believe all I have read or viewed indicates you must be on 3.12 FW before doing the JB.
October 12th, 2009 at 7:14 am
@Ra1nman
it clearly states in multiple places that this only works for 3.1.2. Don’t blame Geohot and all of his awesomeness for your inability to read.
October 12th, 2009 at 7:28 am
@ Joe: indeed!
October 12th, 2009 at 8:06 am
Installed, ran and jailbroken! It’s that simple.
iPhone 3GS white 16gig – woot!! 3.1 – prolly will do 3.12 later today.
October 12th, 2009 at 8:15 am
Read the damn tutorial on ihackintosh.com remember to reboot ur device once after updating and then run blackra1n it does work . U guys just can’t read
October 12th, 2009 at 8:18 am
I have 3gs 32 gig 3.1.2 and it took literally 5 seconds. Make sure iTunes isnt running. Connect phone make it rain reboot phone
That simple. Works great no probs.
October 12th, 2009 at 8:25 am
35 seconds and i am jailbroken. The worst part about it is seeing george’s mug on my screen for half a minute.
But anyway, How does this not work for everyone. READ THE INSTRUCTIONS.
Run Prog. Click Make it rain. Plug in iphone to usb. Jailbroken after reboot.
To everyone having problems. This is my first time jailbreaking and I had no problems. What’s your excuse?
October 12th, 2009 at 8:34 am
What JB apps are people having problems with? Thus far I’ve read AppSync and Winterboard. Anything else not working with 3.1.2?
October 12th, 2009 at 8:50 am
Winterboard works fine for me on 3gs. I’ve seen a few places where it isn’t working on 3g.
October 12th, 2009 at 10:16 am
best thing ive ever done!! i love my new jb and hope geohot releases more blackra1n!!
October 12th, 2009 at 11:05 am
Jail breaking sucks. Someone always trying to get one over on a company no matter what. I jailbroke my old 3G last year it was garbage it’s still unstable garbage. Anyone that trusts their $300 phone to an OS made by a teenager is an idiot. Hands down.
October 12th, 2009 at 11:14 am
JB 2 #GS running 3.1.2 last night, no problem. I’ve got adblock and winterboard back and I’m happy. Battery usage seems about the same as before JB, but I haven’t been using the phone heavily.
October 12th, 2009 at 11:19 am
Apparently Garbage doesn’t really understand what jailbreaking is/does.
I will agree with Garbage on one thing though. Jailbreaking on the 3G does make it laggy. It is perfect on the 3GS though!
__Garbage
October 12th, 2009 at 11:19 am
Call me crazy, but my battery life seems better after blackrain. I’m just sayin.
October 12th, 2009 at 11:31 am
I had a few various issues (post jailbreak) like winterboard not working, etc, UNTIL I restored, and installed cydia FIRST. Then all seems to work.
Just my 2 cents.
–
October 12th, 2009 at 11:46 am
@Ra1nman good for you buddy! Why would you ever update when jailbreak 3.0 is working flawlessly? What improvements have apple made in 3.1.2 that you felt forced to lose a working JB phone, upgrade and try jb’ing all over again? I laugh at fools like you!
October 12th, 2009 at 11:48 am
Anyone have issues with AppSync?
October 12th, 2009 at 11:58 am
Purplera1n was one of the greatest innovations I’ve ever seen!!! Period. I even donated to the guy because I couldn’t believe it was that easy.
As for me, I’m still rocking 3.0 on my 3GS and not chancing an upgrade when my 3.0 jailbreak (from purplera1n) is working flawlessly.
I will continue to use 3.0 until Apple really makes it where I have to have the new OS. Until then, why upgrade? I laugh at people that did and lost all there JB. Luckily now, blackra1n has arrived.
I agree with 3G 3.0 was indeed very laggy when jailbroken through the dev team. This was actually what encourged me to go out and get a 3GS. The 3GS on purplera1n works great with zero lag.
As for the battery life: be wary of what apps you install from cydia. Blackra1n/purplera1n doesn’t affect your battery. It’s certain apps you install from cydia that may reduce battery life.
October 12th, 2009 at 12:15 pm
Best Jailbreaker Program EVER !¡!¡!
October 12th, 2009 at 12:26 pm
The trick is to open iTunes, then run blackra1n. Worked instantly for me after doing this.
1) Plug in iPhone via USB cable 2) Launch iTunes and minimize it 3) Run Blackra1n 4) Click the “make it rain” button 5) iTunes will give an error box, press ‘ok’ 6) Wait for the retarded pic and reboot
October 12th, 2009 at 12:30 pm
@ra1nman: You are a moron. Learn to read you incompetent 12 year old. Blackra1n is only for firmware 3.1.2, it says it EVERYWHERE. It’s no ones fault but your own that you tried it on FW v3.0, idiot.
October 12th, 2009 at 12:32 pm
There has been a little discrepancy regarding the exact process.. it took a few tries and a little research, but here are the exact steps to Jailbreak your 3.1.2 iPhone or iPod touch via blackra1n jailbreak by geoHot RC1 – http://ping.fm/5knkP
October 12th, 2009 at 12:57 pm
OMG UR ALL IDIOTS
JUST MAKE SURE YOU RESTORE TO A OLD BACK-UP THAT ISNT A BACK-UP FROM WHEN YOUR IPHONE WAS JAILBROKEN. UR AN IDIOT IF EVEN DO UR BACK UPS WHEN UR PHONE IS JAILBROKEN. EVEN THOUGH U HAVE A PHONE THAT ISNT JAILBROKEN…. SOME PARTS OF THE JAILBREAK WILL REMAIN ON THE PHONE VIA THE BACK-UP, WHICH MAY CAUSE THE NEXT UPGRADE TO NO FUNCTION PROPERLY. IF U DO NOT HAVE A REALLY OLD BACK-UP OR ONE THAT WASNT MADE WHEN UR PHONE WAS JAILBROKEN U MAY HAVE TO JUST “START A NEW PHONE” BUT REMEMBER AS ALWAYS…. WRITE DOWN ANY NEW PHONE NUMBERS YOU GET OR ANYTHING IMPORTANT YOU REALLY NEED TO KNOW. YOU SHOULD NEVER EVER EVER RELY ON COMPUTERS TO HOLD ALL YOUR INFORMATION. THEY ARE MACHINES AND DO BREAK.
October 12th, 2009 at 1:17 pm
For those who still are having problems running blackra1n make sure you downloaded the program using firefox. I don’t know why but it works when downloaded from firefox. I tried multiple times after I downloaded the program using google chrome. I gave up untill some one said use firefox to download and it worked. So if you tried this way of jb and it got stuck in recovery mode then download firefox then download blackra1n then run it.
October 12th, 2009 at 1:19 pm
To all people who fail to jb use blackra1n 1- your iphone is working phone (locked or unlocked does not matter) if it stuck at any stage, u have to restore to fresh os before jb 2- turn off iphone – open itunes (the iphone does not conect to pc at this time) 3- while iphone is off conect to pc the phone will auto turn on( itunes will ask for active or whatever just egnore any message from iTunes) 4- now itunes and iphone can communicate ( all jb software alway borrow conect line between iphone and itunes) 5- now run blackra1n and let it run by itseft do not hit any button until iphone complete jb ( about less than 30s) It works for iPhone 3gs 3.1 3gs 3.1.2 and 1g 3.1 ( if you firmware 5.11.07 you jb and install cydia. That’s all it can do for now. Now you can install cydia. It can not unlock iPhone , or install app through pcsuite or iphonebrowser , just cydia my system : pc win vista sp2 iPhone : 1g os 3.01 / 3gs os 3.1.2 / 3g os 3.1 all test 100% work
October 12th, 2009 at 1:43 pm
ATTENTION EVERYONE!!!!!
If you phone had been previously jailbroken, you may still have data on your phone that will prevent you from doing this update.
EXAMPLE:
i had downloaded “Extended Preferences” from Cydia. In that program I changed where it says AT&T at the top so it would say NATE. Now when 3.1 came out i accidentally upgraded and lost my jailbreak, BUT my name NATE was still at the top, even though i had no cydia or anything and my cracked apps wouldnt work.
So i am saying even though you cant see it you may have a corrupted file or just something that will prevent you running Blackra1n correctly.
Like i said in my previous listing….. restore from a back-up from when your phone wasn’t jailbroken or just start a new phone and start from scratch.
And remember as always…. Be your own computer…..
WRITE DOWN ANY NEW PHONE NUMBERS YOU GET OR ANYTHING IMPORTANT YOU REALLY NEED TO KNOW. YOU SHOULD NEVER EVER EVER RELY ON COMPUTERS TO HOLD ALL YOUR INFORMATION. THEY ARE MACHINES AND DO BREAK
Thanks Everyone
Nate
If this helped post a comment
October 12th, 2009 at 1:48 pm
ALSO PEOPLE PLEASE DONT LIE OR SCARE PEOPLE AWAY! THEMES WORK FLAWLESSLY, APPS WORK FLAWLESSLY, WORKS CLEANER AND SMOOTHER THAN EVER. GOTTA LOVE GEO… THANX ALOT MAN
ITS BEEN A LONG TIME COMING
October 12th, 2009 at 2:29 pm
Just tried using black ra1n on my 3G and i got bricked! Anyone know how to get my PC to read my iphone again???
October 12th, 2009 at 3:22 pm
can som please help me. i have used blackrain om my iphone 3gs. igot the application in my mobile when i insert a another simcard the iphone doesn’t read it can som one help me please
October 12th, 2009 at 3:50 pm
@help
Read. If you upgraded to anything higher than 3.0.1 through an official iTunes update, your baseband is updated and cannot be unlocked (as of yet).
@everyone else with dumb questions.
If you cannot handle the process of reading everything about something, you probably shouldn’t do it. Restore your phone and go back to unjailbroken life. You clearly do not have the mental capacity to handle this jailbreak process.
It works. If it doesn’t work for you, YOU are doing something wrong. Not the program. The code doesn’t change. The enduser does.
October 12th, 2009 at 3:52 pm
@NeedHelpBadly
Restore your phone. If you can, restore to backup. If not, start fresh.
If you don’t know what I’m talking about, google is your friend.
October 12th, 2009 at 4:08 pm
i mean a link stupid donkeys
October 12th, 2009 at 4:54 pm
Hi to all, turn off the Bonjour service if you ar using the latest version of itunes and the jailbreak works fine in less than a minute!! Cheers
October 12th, 2009 at 6:08 pm
Has anyone found that Winterboard doesn’t work with Blackra1n?
October 12th, 2009 at 6:14 pm
Cydelete, Fiverow and dock don’t work, statusnotifier doesn’t work either? Are they not compatible with 3.1.2
October 12th, 2009 at 6:43 pm
Blackra1n Is not “completely” jb like other tool from dev-team. You’ll find some apps does not work. Geohotz does the job fast not best dev-team does better job but too slow
October 12th, 2009 at 7:16 pm
HI, i have iphone 3g 3.1.2 and i did everything as said.. but its not happening..after clicking make it rain it jus shows running and geting me more qrious and you know what happens to iphone ppl whn something goes wrong,so all that is happening dude and that guy whtever pic. doens’t appear.. have no idea what to do..can anyone help..?
October 12th, 2009 at 7:25 pm
HEy, Stasplaya44
Try restoring (I know pain in the …) then re ra1n, then install only cydia. Then winterboard. That worked for me. Seems like cydia needs to be installed 1st.
October 12th, 2009 at 7:57 pm
John…. thanks ill give it try
October 12th, 2009 at 7:58 pm
http://www.ithinkdiff.com/fixing-issues-with-ipod-touch-3-1-2-blackra1n-jailbreak/
this is for everyone who has problems jailbreaking ipod touch 3g.
BlackRa1n works 100% on all other models both iphone and ipod. I’ve just confirmed it but before made a full restore and setting it up as a new phone then JB then backup restore.
October 12th, 2009 at 8:39 pm
Has anyone got unknown error 13 on their phone?
October 12th, 2009 at 8:43 pm
HEY.
I’ve been doing some research and here are some things I’ve learned: - Blackra1n works amazing for most people. - The ipt3g 8gig is apparently NOT supported. Geohotz was not aware that there was an 8gig. - If you are trying to jailbreak any of the other ipod/phones and it still isn’t working, do some good old fashioned Google searching and plenty of people have posted detailed instructions on how to fix your problems. - I have not been able to jailbreak my ipt3g 8gig, but just wait a bit longer for Greenpois0n. I personally am not go to hop on the train to brick town tonight.
October 12th, 2009 at 9:18 pm
I’m on an iPhone 3GS, and I swear I’ve tried every strategy on 10 million different pages, and I keep getting stuck on “entering recovery.” I never see dude’s face, just the itunes and USB cord. EVERY SINGLE TIME. I’ve did a shift+restore with the .ispw saved on my computer. I killed the itunes related processes/services. I put the phone in airplane mode. I’ve hit “make it rain” while standing upside down with my thumb in my mouth. None of this s**t works. I don’t get what’s going on.
October 12th, 2009 at 9:33 pm
Edit: Randomly, I decided to NOT check the box for Windows compatibility to XP Service Pack 2. It said to do it, I didn’t check the box at all, and it worked. I’m on Vista 64.
October 12th, 2009 at 9:46 pm
All of you ******** who keep saying to read the ******* instructions, shut the **** up. Just because it worked for you doesn’t mean it’s working for a lot of us (who can read and follow simple instructions) including me. I have a 3GS, 3.1.2, 32GB, iTunes 9 and I have tried everything as well. Obviously something is going on. Tried on multiple computers every way possible. And also, some of you say leave iTunes open, some say close it. I’ve tried everything. When I make it rain it reboots the phone and says connect to iTunes forever. I can’t reset it into DFU or anything. A lot of others are having the exact same problem. But anyways, yes *******, we can read and we’re not idiots.
October 12th, 2009 at 10:03 pm
This might not work for everyone the first time. It might in some cases take more than one attempt just no mater how many times you restart your iPhone leave it plugged in the computer. I did the 3.1.2 upgrade through iTunes and had to hold down the home and power/standby button and let go after it turns off and not wait for the logo to let go of the buttons and then engaged the “make it rain” button and worked after a few different attempts…..but that’s just me..
October 12th, 2009 at 10:42 pm
to David every iphone / pc are difference when you fail jb the first time your file system already broken. you need to restore to the fresh os -> put att simcard in the phone let itunes go to active page -> so iphone can fuction (not at emergency screen) -> reboot iphone once time -> run blackra1n i hope this have (i did like this with my 3gs 3.1 , it works. after that i upgrade to 3.1.2 and did same thing, it works again)
October 12th, 2009 at 10:59 pm
It works. I jb mine in ten seconds. My iPhone was preinstalled with 3.1. Vista 32 bit, iTunes 9, and firefox to download. Doesn’t play great with the 3g as easy though. George is the truth at doing what he does. Wasn’t he one of the first to jb the 3g? Stop all the hating. Use it or don’t. What does it matter? Read and research if you have a issue and then post your questions if there’s no answer. Some of you “post not read” dumb asses make use have more **** to read asking the same question over and over.
October 12th, 2009 at 11:22 pm
Any comments about 2G Ipod touch 3.1.2 peeps? I installed blackra1n but after shutting down and restarting it asks me to connect to iTunes
October 12th, 2009 at 11:51 pm
So many angry people in here. Everyone will have a different experience and that’s just how life is.
The jb worked fine for me and I now have cydia, installous, sbssettings, winterboard, five row icons and dock.
I’m running a 16gb 3gs 3.1otb plugged into iTunes to update to 3.1.2 and iTunes came up with error and left my iPhone in recovery mode and I had to restore. After phone was all happy again I made it ra1n and was done it seconds.
And what’s up with people calling geo ugly? Why would that have anything to do with the SW.
October 13th, 2009 at 12:01 am
I have notice that blackra1n works better with 3gs Iphones than 3g.I have a 3g and so far blackr1n has not worked
October 13th, 2009 at 12:21 am
blackrain is not installing into my phone. is thre any way that u can help me and try to fix this problem..i really need some help with this thanks. contact me please.
October 13th, 2009 at 12:39 am
It seems to work flawlessly with 3gs but you have to work out 3g. I did my gf 3g like stated in the earlier post and it worked.
October 13th, 2009 at 12:51 am
OKAY fianlly got it. before i was getting the whole itunes plug thing… until i moved the downloaded blackra1n to my c/ folder.
October 13th, 2009 at 1:17 am
OK I want to get the new 3.1.2 OS and I’m thinking of using blackra1n to do it, but what I want to know is since I already have JB apps that have data I would like to keep. Is there any way/app that does a backup of apps and data so that they can be restored after upgrade and JB I know that AptBackup and AppBackup just store a list of your apps to reinstall, but I don’t think they get your data.
October 13th, 2009 at 1:22 am
Must I follow the same process like people do with their 3g ipod touch? Please help !!!
October 13th, 2009 at 1:29 am
Eli ..what device and version do you have? ipod touch or iphone?
October 13th, 2009 at 1:30 am
OK, I have a iPod 2G 16GB. This is what I did (worked flawlessly):
Cheers.
October 13th, 2009 at 1:31 am
Forgot to add, I also have the newest version of iTunes and FW 3.1.2.
Good luck.
October 13th, 2009 at 1:35 am
Updated to 3.1.2 have 16gb 3g blackra1n did not work for me had to restore 4 times . Closed iTunes stuck in recovery until I just had to restore I’m on windows xp ran blackra1n in sp2 mode made it rain then got stuck on in recovery screen. When I tried again it was stuck again in recovery when I held down home and power I did not see geos face just recovery screen from iTunes. On my last attempt it claimed it was done but my phone was still in recovery mode. So now im back at stock apps on my phone lost my jailbreak and am not at all happy! Any suggestions
October 13th, 2009 at 1:58 am
Yatin i have a 8gig 3g iphone
October 13th, 2009 at 2:25 am
Thanx a lot Jim.. i will attempt your process in an hour.. if it doesn’t work, I’m going to pull the hair out of my head !!!!!
October 13th, 2009 at 3:45 am
works perfectly on factory unlock 3gs iphone. i dont much about iphones or computers and did it in less than 2 min. dont think there is anything to worry about if jb-ing is all u need.
October 13th, 2009 at 3:45 am
I downloaded my iPhone 3.1.2 update from somewhere else using firefox. When it was done I installed it through iTunes and updated my I.
October 13th, 2009 at 3:46 am
Guys.. Do I have to install Cydia via wi-fi?
October 13th, 2009 at 3:52 am
When u run blackra1n after it installs on ur I. It should be an option
October 13th, 2009 at 3:58 am
I don’t have wi fi yet..please help me out..what should I look for to install using my cable internet?
October 13th, 2009 at 4:03 am
You should be able to install using 3g. I used it instead of wifi. Does blackrain app load on your phone. The app should be on ur phone.
October 13th, 2009 at 4:18 am
Does ipod touch have 3g? Yes..I do have blackra1n on my ipod touch but I can’t shut down. If I shut down then I need to connect to a pc and run blackra1n again.
October 13th, 2009 at 4:29 am
No it doesn’t. You would need wifi then.
October 13th, 2009 at 4:36 am
Okay! Thank you kindly for your time and help
I will try again when I have my wi-fi set up .. for now i will just enjoy my music and music videos
October 13th, 2009 at 5:22 am
still no luck dude..tried everything..i have 3g 3.1.2..so damn badly want to JB..blood is cumin out of my *** now..wht to do ppl.. whtever i do..that geohot boot logo is not coming at all..seen million vid. n tried everything..so damn tired..but anywayz still tryin..if anyone can help then plz..
October 13th, 2009 at 6:12 am
i cant seem to open blackra1n after i download it.. i keep getting the “blackra1n.exe-Entry Point not found” message : The procedure entry point sqlite3preparev2 could not be lovated in the dynamic link library SQLite3.dll.:: If anyone knows how i can fix this please get back to me
October 13th, 2009 at 7:14 am
I have a iPhone 3GS 32gb which came with 3.1OTB and is still running 3.1.
I’m assuming that if I update to 3.1.2 in iTunes all of my apps and contacts will remain on the phone.
If I then run blackra1n will all the stuff already on the phone stay on it, or do you end up with a fully reset phone with blackra1n installed on it?
Thanks
October 13th, 2009 at 8:18 am
@Jonsky
Sync phone making sure you have transferred all purchase you made on your phone to iTunes (that’s just a precaution). Upgrade to 3.1.2, all aps and contacts will be fine. Sync again. Then run blackra1n. All aps and contacts will still be fine. Done in that order the worst that can happen is that you have to restore the phone.
October 13th, 2009 at 8:56 am
Estimados, antes de hacer su Jailbreake con este programa, por favor lean este Blog, http://iphonedechile.blogspot.com/ Saludos desde Santiago de Chile
October 13th, 2009 at 9:21 am
I TRIED ALL THE INSTRUCTIONS, ALL USER COMMENTS, 2 DIFFERENT PC’S WITH DIFFERENT OPERATING SYSTEMS AND STILL NOTHING BUT STUCK RECOVERIES.. 3G, 3.1.2.. MY MODEM FIRMWARE IS 05.11.07 DONT KNOW IF THATS A KNOWN ISSUE..THIS WAS JAILBROKEN ON 3.0 UNTIL THE ITUNES UPGRADE TO 3.1.2, MAYBE THAT HOSED SOMETHING UP ON THE PHONE..
October 13th, 2009 at 9:53 am
FINALLY Got it Cydia here i come . What i did was put blackrain in my c file uncheck all the boxes under compatibility mode uncheck all of the compatibility options and then run it it should work . My next question is can you install rock your iphone and cydia at the same time with no conflict? or should it be one or the other ?
October 13th, 2009 at 10:54 am
Weirdest thing happened on my second phone, blackra1n was telling me it was successful and I could use all my cracked apps, but had no Cydia installed. Got nervous when I went to restore as new phone and got error 13, but figured it was from closing down apple processes. Rebooted, restored as new to 3.1.2 and jailbroke. Everything works fine. Appsync, SBSettings, Backgrounder (froze on install but works after reboot).
If you have an issue, just restore and re-do. That’s the best advice I can give after successfully doing 2 3gs.
October 13th, 2009 at 11:36 am
Hey fellas, here’s what I did. I have an iPhone 3G 16G v3.1.2 on Vista x64. 1) Start off with a fresh restore. 2) Uninstall iTunes, Bonjour, and Apple software update only. 3) Reboot PC. 4) Install blackra1n as per usual instructions.
Worked for me. Good luck!
October 13th, 2009 at 11:46 am
I have an Ipod touch 2G running on 3.1.2 and I didn’t use a pwnage tool on it before nor have I jailbroken it before. Will blackra1n work?
October 13th, 2009 at 11:54 am
October 13th, 2009 at 12:22 pm
To everyone
forget blackra1n. Try new pwnage 3.1.4 from devteam Go to funkymonkeyspace.com for instruction I never try but I trust devteam better
October 13th, 2009 at 12:51 pm
i’m not gonna go through every one of these posts to try and find the answer to my question… sorry. ever since i did the jailbreak, i have no service or internet connection. anyone else have this problem?
October 13th, 2009 at 1:08 pm
I posted th EXACT STEPS yesterday, but here it is again.. rephrased..
@everyone follow the steps on my site EXACTLY and you will be good to go, but you have to do the exact button hold/release sequence/timing as this IS KEY. Here is the site: http://ping.fm/5knkP
Mine didn’t work and was doing the same as you guys until I did the exact sequence of holding both buttons, then releasing the powerbutton when the apple logo appeared while still holding the home button, then releasing the home button after the GeoHot background appears. If you do the exact steps, in order listed above, you should have no problem.
October 13th, 2009 at 2:06 pm
my 32GB 3GS is dead. tried to jailbreak it and got as far as the picture of Frodo. I stared at Frodo for over an hour. Now my phone doesnt respond to anything. It won’t go into recovery mode, itunes wont detect it, windows won’t detect it. And yes, it was fully charged before trying to jailbreak.
Any solutions?
October 13th, 2009 at 2:07 pm
One more thing, I jailbroke my old 16gig iphone 3g just before attempting on my 3GS…
October 13th, 2009 at 3:41 pm
i used blackra1n and my phone froze for 3 hours i DO NOT reccommend using this program
October 13th, 2009 at 6:56 pm
GREAT! Ive noticed small things with BLACKRA1N.
OH, IF YOUR PHONE FROZE UP, YOUR A D.A. FOR NOT READING BLOGS AND WATCHING VIDEOS
October 13th, 2009 at 7:32 pm
@Everyone Geohotz (George Hotz) was the first person to unlock & jb an iPhone first gen so being all like “HURR WAIT FOR DEV-TEAM DONT TRUST THIS GUY LAWL” is pretty damn stupid.
http://iphonejtag.blogspot.com/
Read up. 
Also, blackra1n works fine if you’re not a complete fuckwit. <3
October 14th, 2009 at 1:18 am
To Ben
the first does not mean the best. You should ask yourseft why you do use redsn0w to jb your iPhone ? Why you need ultrasn0w to unlock ?
Don’t lie to yourseft .
October 14th, 2009 at 3:31 am
DO NOT FOLLOW MY INSTRUCTIONS!!! MY PHONE LOST THE CARRIER SIGNAL AND NOW SHOWS NO SERVICE. SO I CANNOT MAKE CALLS OR ANYTHING. JAILBREAK WORKED BUT IT LOST THE SIGNAL SO DO NOT DO IT! SORRY FOR THE INCONVENIENCE
October 14th, 2009 at 7:16 am
Hei guys.. Please help me out here..I installed blackra1n,cydia and winterboard..after I shut down and restart I get the annoying iTunes and USB sign.. what am I doing wrong? Do I need to delete blackra1n after installation?
October 14th, 2009 at 7:26 am
Hey everyone with a 16GB 3G 3.1.2 having problems with Geo not showing up listen. I have been doing this for 6 hours today and finally got it to work by repeating this a bunch of times.
So, I just Jailbroke my Iphone 3.1.2 16GB 3G. What I did was actually told to me by Ikheafe so thanks to him.
Plug up your iPhone Close iTunes Turn your Iphone 3g OFF Run BlackRa1n click make it ra1n Hold down power and home As soon as you see the Apple logo release power BUT HOLD HOME for at least 20 seconds
Do not release home earlier than 20 seconds or until you see GeoHot appear on your Iphone.
(If this doesn’t work then try again, hold down the power and home until your phone shuts off. Close BlackRa1n and try again. As they say rinse, wash, repeat.)
Once you’ve done that, you should have a pop-up on your computer saying Jailbreak is done. Wait for the phone to reboot. Once the phone reboots you will see Blackra1n icon on your phone.
Hope it helps you like it did me!!!!!!!!!!!!
October 14th, 2009 at 9:17 am
i tried everything you guys said on 8gb 3g it just does not work. First it says connect the i phone to itunes then it goes into a dim black screen any help or anything else i can try
October 14th, 2009 at 9:55 am
I jailbroke my 3gs 3.1.2 on vista ultimate with black ra1n and installed winterboard first thing after cydia and got frozen on the apple screen after reboot. I had to hold power and home till the flash and let go of power to make my iTunes restore my phone.
October 14th, 2009 at 10:09 am
Not hard to do but a pain, and winterboard is my main reason to jail break. Not his problem but pisses me off that there wasn’t a warning for me without having to search for it.
October 14th, 2009 at 10:35 am
TRIED IT A FEW TIMES LAST NITE ON MY 3G 3.1 AND IT GETS TO THE RUNNING PART AND STAYS THERE FOREVER. I HELD THE HOME/POWER BUTTONS DOWN AFTER ABOUT 15-20 MINUTES OF WAITIN AND I GET A MESSAGE SAYIN THAT IT WAS SUCCESSFULLY JAILBROKEN WAIT FOR A REBOOT. NOTHIN HAPPENED. I THOUGHT I WAS IMPATIENT AND I TRIED IT WAS AGAIN ONLY TO GET THE SAME EXACT MESSAGE. PLEASE HELP!!
October 14th, 2009 at 11:20 am
2nd time no problem yet. Cycled power for winterboard reboot instead of letting it do it for me. But I think my solution was only installing one installer. I chose rock but may change to cydia. Haven’t decided yet. So far so good. One again 3gs not unlocked new baseband jb updated 3.1.2 on vista ultimate with only rock app and winterboard working.
October 14th, 2009 at 12:47 pm
Awesome dude! Jailbroke my Ipod 2G in like four secs! Thank you very much:D
October 14th, 2009 at 3:44 pm
When I try this I see the custom screen with the rain and the little spinning pinwheel thing. Then my ipod touch goes black and nothing happens. I can’t restart it or anything. I restored it through itunes and tried it 3 times already. Any help?
October 14th, 2009 at 4:02 pm
I used both vista and Xp. With my vista my iPod was stuck in the connect to iTunes screen. After I tried like 10 times i tried on my Xp. Im also using the newest iTunes if that helps anyone helping me
October 14th, 2009 at 5:01 pm
I have a iPod 3g, version 3.1.2 and when I did this it never worked. I don’t know why? So I’m hoping if someone can help!
October 14th, 2009 at 5:03 pm
Doesnt work for me!!! blackra1n stay on running process and my iphone stay on itune recovery mode ,i have tried 8 time , everytime the same shittt!!!
October 14th, 2009 at 5:34 pm
This sadly doesnt work for me, if it’s the USB Logo where it’s stuck or the running!
All the advise here i have followed but still no go
October 14th, 2009 at 6:47 pm
I got 2 out of 3. 3GS 32gig worked perfectly. ipod touch 2nd gen 8gig, again worked perfectly. ipod touch 3rd gen 8 gig, tried three times but no go. All upgraded to 3.1.2 first Click let it rain and it starts, then the touch just turns off after seeing the recovery screen. Have to do a recovery in itunes to get it back. Have tried with itunes on or off but havent tried turning off the bonjour service though….
October 14th, 2009 at 7:00 pm
i do the whole process of the blackra1n thing and when its done the app is not on my phone and its like nothing ever happened. i have the iphone 2g what should i do
October 14th, 2009 at 8:58 pm
my winterboard isn’t work w/ blackrain, please advise i need my themes people
October 14th, 2009 at 11:45 pm
Holy ****! It finally worked! I must have tried this about 20 times using some combination of all of the previous suggestions. I am running Win7RC 64-bit. Circumstances when it worked > no compatibility mode was checked, no Run As Administrator, I did not have the blackra1n.exe file at the root of c:. No Apple processes were running except AppleMobileDeviceService.exe. iTunes was not running. Phone was powered on and unlocked.
October 14th, 2009 at 11:47 pm
Forgot to mention my phone is iPhone 3G 8GB. The previous 19 times I tried it I was getting the “connect to iTunes” symbol every time, then I would have to reboot the phone.
October 14th, 2009 at 11:50 pm
And I didn’t have to hold the buttons in a particular order, etc. I just saw the picture within about 15 seconds. Finally!
October 15th, 2009 at 12:41 am
worked for me… iphone 3gs 16gb on windows 7 ultimate 64bit. took like 5 secs…
October 15th, 2009 at 2:36 am
This is Amazingly fast works like a charm 2 thumbs UP
October 15th, 2009 at 10:48 am
Hi. Can i use this on a 3gs with 3.1 factory installed? i didnt update to 3.1.2 when itunes told me to. so can i run blackra1n as it is with 3.1 isntalleD? dont need an unlock just a jailbreak. please reply
October 15th, 2009 at 11:15 am
Very easy jailbreak, did have to use an XP cpu with file saved to C drive. HOWEVER, MY PHONE CRASHED NEXT DAY!!! Restored, re-jailbreaked, crashed 4 more times the next 2 days. Reverted to 3.0.1 via qukpwn and redsn0wed’d it and have no more problems. WAIT FOR DEV TEAM ON THIS, TRUST ME. Cannot tether with this either not with MyWI or BenM.
October 15th, 2009 at 11:44 am
I tried to use it at least 10 times. no luck. I looked at this forum and seen iphone4idiots said “disable the bonjour service”. Did that and soon as I tried it again, BAM it worked. thanks iphone4idiots. If you having problems,just do what he said.
October 15th, 2009 at 12:06 pm
I have 3g on 3.1.2. I was stuck at “running…” screen until i followed previous post suggestions and went to fresh restore. After the fresh restore i used the most recent backup that itunes suggested (it had been previously JB) so that i could get my contacts back. blackra1n worked immediately.
October 15th, 2009 at 3:23 pm
OKAY SO I HAVE AN IPHONE 3G RUNNING ON 3.1.2 SOFTWARE I JAIL BROKE IT VERY FAST AND EASY BUT NOW WHEN I DOWNLOAD THEMES THAT WORKS BUT WHEN I GO INTO WINTER BOARD I CLICK ON THE THEME IT LOADS FOR 2 SECONDS THAN GOES TO NORMAL NOTHING CHANGES I TRIED THE ORIGINAL THEMES TO AND IT DIDN’T WORK. PLEASE HELP ME !!!
October 15th, 2009 at 3:40 pm
After repeated attempts to install blackra1n, and always getting stopped at the iTunes plug icon, I read about moving my blackra1n download to my c folder. Did so and lo and behold, it worked! Happy now:)
October 15th, 2009 at 4:32 pm
Stops at running for me, i have iphone3g i tryed EVERYTHING.
October 15th, 2009 at 6:07 pm
I followed user post 162 (Jim)’s advice, worked for me after 15 tries.
October 15th, 2009 at 6:24 pm
I just figure out, the computer must be “Authorized” in iTunes. Mine was not authorized so I fixed this by going to “Store” -> “Authorize computer.” I had to disconnect / reconnect my iPhone, then run blackrain.
October 15th, 2009 at 7:01 pm
This does not woek man
October 15th, 2009 at 9:22 pm
worked after many tries. found out that my USB Wireless mouse needed to be unplugged before it worked and now works great. I would recommend unplugging all USB to be on the safe side
October 15th, 2009 at 10:19 pm
It took a while to jailbreak my 3G, and a little trouble-shooting, but it finally worked and I am so happy! Geohot is my new hero.
October 16th, 2009 at 10:49 am
Does any one know how to jail beak an already updated 3g 8 gig because black ra1n doesnt work
October 16th, 2009 at 11:53 am
I have tried everything(fresh restore, ending processes, holding power and home…etc) posted in every thread and was very doubtful of blackra1n working for me. I got blackra1n to work for me by putting phone into DFU mode myself instead of letting blackra1n do it…hope this helps someone.
October 16th, 2009 at 1:55 pm
I’ve been trying this since Monday the 12th and couldn’t get it to jailbreak. And I found these instructions from “PuG” on another site AND IT WORKED.. FINALLY ! ! !
“Been messing about with my 3G 8gb for about half an hour trying to jailbreak it lol.. followed everyones suggestions and nothing worked… THEN i cracked it… Do all the update stuff first then unplug your iphone and reboot it. compatibility mode your blackra1n, RUN blackra1n and click “make it rain”… THEN and only then plug your iphone back into the computer… was over and done in 30 seconds, popped up wit the message telling me my iphone would be jailbroken once it had reboot and the image of the curly haired lad with the wave of iphones popped onto the screen… it rebooted and now its done. Cheers..” In addition I stopped all Antivirus services..
October 16th, 2009 at 3:01 pm
FIX FOR THOSE STUCK ON RECOVERY MODE Confirming what CT63366 said. When blackra1n gets your iPhone to reboot to go into recovery mode, remove the USB cable. Then when its on recovery mode (i.e. USB cable pointing to iTunes on iPhone screen), plug it back in and see Geohot’s face on your iPhone appear.
October 16th, 2009 at 4:04 pm
Nope, doesnt work, ipod touch 3g refuses to boot after this.
October 16th, 2009 at 7:09 pm
Thanks Mike on 10/12–after turning ‘OFF’ XP-compatibility mode blackra1n worked …after 5 failed attempts with XP-compatibility mode ON; running Vista Business SP2.
October 17th, 2009 at 1:15 am
wow! that was so fast! I updated mine which is 3g 3.1 all you need to do:
Voila! count 1-10 then you will see the picture of blackra1n guy and wait to reboot.. you are done and finally jailbroken your iphone! thanks!
October 17th, 2009 at 1:16 am
hey also all my data are still save in my iphone!!! this is really great and fast!
October 17th, 2009 at 1:19 am
guess. what. mike on 10/12 is a life-saver.
October 17th, 2009 at 1:20 am
Worked like a charm…but had to try for more than 20 times…. Here is how i did…hope it’d help somebody, Windows 7 RTM 64bit, iPhone 3G 16GB — Tried all possible ways as everybody said…pressing and holding buttons…so on didnt work… when it worked, the .exe was in C drive, Ran as an Adminstrator, iTunes was CLOSED, what made the different is unpluged my Microsoft wireless keyboard any mouse..(as I saw by someones comment) thought its lame…but somehow it worked 4 me…. the easiest Jailbrak ever… Thank you GeoHot and the person who left the comment
October 17th, 2009 at 1:27 am
After 3 hours I finally got it to work by doing this: 1.Disable sync in the intial phone settings 2.Edit>preferences go to devices tab and check disable sync. 3.Put phone in air plane mode 4.Ran blackra1n as admin and winxp compat 5.Worked!
October 17th, 2009 at 1:41 am
I cant believe how ****** this jailbreak is… it is actually the most stressful and hardest to do yet. My iphone just shows the sync to itunes screen every time i do it. ive tried every which way, no luck. these little faggots need to tighten it up
October 17th, 2009 at 2:16 am
Unjailbroken IPT 1G 16g 3.1.1 (updated for free) jailbroken in less than 20 secs, reboot took longer.
Didn’t work the 1st time so disconnected, got stuck in DFU (silly icon where USB plug points to the ITunes icon), just turned off iPod, turned it on again, everything back to normal, connected sync cable to PC, “Let it ra1n”, BAMMMMMM, jailbroken.
October 17th, 2009 at 1:01 pm
This jailbreak DOES work on the 3G w/ the 3.1.2 update, I just jailbroke and I’ve already installed apps requiring a jailbreak and they’re working just fine… I too had initial problems restoring after downloading the blackra1n app (kept getting stuck on the logo instructing me to connect to iTunes). Finally, after the 3rd reset after getting stuck – eureka! Persistence is the key…
October 17th, 2009 at 2:12 pm
Ok people I found the key to one eyed willie. For those getting stuck on running in blackra1n with the phone showing the usb connector and itunes do this. 1. put blackra1n on c drive 2. turn compatibility mode on. Vista users put XP. Xp users put windows 2000. 3. run program and hit make it rain. The program should get stuck on entering recovery mode at this point. 4 with the program stuck on entering recovery mode, hit power and home on the phone to turn it off. Leave the phone off. 5. close blackra1n. turn compatibility mode off. run it again, hit make it rain 6. turn iphone back on. wait for it to jailbreak. I’ve now done this on 2 iphones that wouldn’t work the way the normal directions state and it worked like a charm. Give it a try.
October 17th, 2009 at 4:24 pm
my ipod is 3.1.2 and it finishes downloading but does not reboot ive tried rerunning blackra1n and ive tried to hold both buttons thats does not work any ideas
October 17th, 2009 at 4:39 pm
YES !!!! this worked perfect on my iPhone 3gs on firmware 3.1
THANK YOU SO MUCH !
October 17th, 2009 at 4:51 pm
I’ve tried everything on this website, and every idea on others! I have a iphone 3g with 3.1.2 and cannot get blackra1n to jailbreak the phone. If I’ve tried once, I’ve tried 30 times. I’ve even tried it on several computers to no avail. I did make some advancement, when hitting ‘make it rain’ it was going to the usb to itunes screen and staying. NOW it gets a little past that on a black screen and just stays there. Any other ideas before I give up? I’m running Win 7 and have placed blackra1n in every possible place and tried running it in every type of compatiblity mode available.
October 17th, 2009 at 5:22 pm
Does this work for the 1st generation ipod touch?
October 17th, 2009 at 6:53 pm
iphone 3g here, previously used redsn0w. Not sure if that makes a difference or not. Had a real heck of a time trying blackra1n. Tried all the “put it on the root of C drive, hold power + home, blah blah, nothing worked EXCEPT for the following:
Windows 7 x64 blackra1n exe was on the desktop (some fixes say it MUST be on the root of C:) iphone was plugged in, just sitting there. right click on blackra1n.exe, set compatability mode to XP SP3 (read here to use Vista, but it blows and I refuse to associate with it) right click blackra1n again, Run As Administrator.
That’s it, worked exactly as described after that. Took about 20 seconds to put the blackra1n app on the phone, I’m downloading Cydia as I type this.
To all the folks who used this, you should donate! To everyone complaining about it, keep researching, the right method is out there for you! Then Donate! I did!
October 17th, 2009 at 7:56 pm
Geo hot can u jailbreak 3.1 3g with blackra1n? also im not and official carrier but when i update my 3g it gets locked then i put in a disactivated sim and connect it to the computer then it is activated but not unlocked is this something u would like to post trust u will get donations off of this
October 17th, 2009 at 8:05 pm
thank you john that tip you said about restarting it work thank you thank you, its wierd it work fine at my school but it wouldn’t work at my friends house until i did that thank you
October 17th, 2009 at 8:06 pm
a word of notice DO NOT DO NOT install all of the installers it will muck up your ipod or iphone
October 17th, 2009 at 8:08 pm
if you do install all of them you will not be able to set any themes. You’ve been WARNED
October 17th, 2009 at 8:09 pm
LALWZ i’m a hacker LALWZ
October 17th, 2009 at 8:11 pm
does anybody know any good sources thank
October 17th, 2009 at 8:17 pm
why is the itouch 3g tethered
October 17th, 2009 at 9:56 pm
ive tried this a couple times and its a pain in the *** to restore since every time i try to jailbreak my ipt3, the picture of the dude comes up, then a little loading thing at the bottom comes up and then it goes black and it wont reboot. anyone know whats goin on? cause i followed the tutorial and stuff and it still didnt work.
October 18th, 2009 at 1:06 am
Mine gets stuck on the restore screen until i give up and try to restart then it pops up as “Done!” but it really isn’t.
it lied to me
October 18th, 2009 at 2:47 am
please its been 2 days now i cant seems to jailbreak my iphone using blackra1n i did all the tips and guide but its not working for me i’m always stuck on running no matter what i do. but the iphone of my friend that i just jailbreak it work fine and done under 3mins. please help dont know what to do anymore
October 18th, 2009 at 3:15 am
And… There goes my iPod Touch 2G. Stuck on a colorful screen, won’t do anything, even turn off. For people who want to see.
http://i37.tinypic.com/2hsaqvo.jpg
October 18th, 2009 at 4:18 am
this doesnt work at all for 3.1.2 on iphone 3g
October 18th, 2009 at 4:23 am
Sorry but I tried this and everything like remove the sim card ect nothing works tried on 3 different pc On my laptop It gets stuck at the usb restore in itunes and on the other 2 computers it gets by this and I never see the boys face and all I see is a semi lit dark screen and on the computer it says wait for reboot I leave it there a hour and the phone shuts off I turn the phone back on and it says connect to Itunes again any help would be great because everything people are saying here does not work even had a friend that is great with computers and phones try it all different ways and he tried on his computer and it did not work Thank you for your time Iphone 3g 8gb at&t version 3.1.2 model mb702ll I have been trying since blackra1n came out Thanks for your time sombody out there must have a real answer I tried email geohot but never returns them where is the update for the 50 percent of us that this does not work Thanks all have a great day
October 18th, 2009 at 4:23 am
I tried like 20 times over 3 days, but no luck am using 3G 16GB.
October 18th, 2009 at 6:11 am
I’ve run blackra1n on the ipod touch 3g, it works perfectly until you reboot the device, I then have to restore it back to it’s original state!!
October 18th, 2009 at 6:24 am
3G +3.1.2: - Guys/Gals, follow the alternative method by iSpazio at btm of page on ihackintosh.com “Jailbreak your iPhone iPod 3.1.2 with Blackra1n” article. It deals with situations in which you don’t see the Hotz graphic + get stuck on “running”. Cheers.
October 18th, 2009 at 10:48 am
Look, there is an obvious conflict between blackra1n and some systems. The simple solution is to try a different computer, several if you have to. I’m just curious as to why I am having intermittent issues receiving PUSH notifications since I installed this jailbreak.
October 18th, 2009 at 12:03 pm
Can anyone tell me how to unlock an iphone 3gs 3.1 firmware 5.11.07 out of the box? PLEASE????????????
October 18th, 2009 at 12:11 pm
HELP!! I do not have wifi on my ipod touch. but i need to jailbreak!! Blackra1n says it needs wifi to download cydia to finish the jailbreak. Is there anyway to get cydia without having internet? Can the jailbreak even finish without installing Cydia??
October 18th, 2009 at 12:30 pm
sigh I have a 3G White 16GB 3.1.2 FRESHLY RESTORED over 20 times following other peoples advice, simply rebooting it 100 times if the blokes face didnt pop up. NOTHING, Not one difference putting the file in the C drive downloading it from firefox, admin no admin NOTHING, Mac vs PC NOTHING. It will not let me no matter what I do ): I Have Read everyones comments above me and followed basically everyone, vids from Youtube still NOTHING. I have tried every possible solution and it has failed. There seriously HAS to be another jailbreak apart from this. Its just ridiculous how many times Ive tried and tried. my email nitromenace@hotmail.com EMAIL ME OR REPLY TO THIS IF YOU HAVE ANY OTHER WAY OR METHOD OR ANYTHING ON HOW TO DO THIS ):
October 18th, 2009 at 12:32 pm
sorry thats nitro (underscore) menace (underscore) @ hotmail (dot) com
October 18th, 2009 at 1:59 pm
great jaibreak very fast but my winter board is not working
October 18th, 2009 at 2:20 pm
Been trying to jailbreak this for a couple of days now. Updated to 3.1.2 via iTunes. Currently running Vista. Tried all possible and impossible combinations of rebooting my iPhone, putting it in recovery mode, in DFU mode, holding power/home buttons for different time periods, and alas, after a solid 30 tries Frodo appeared on my iPhone. His jolly face stared right back at me for a good 20 seconds and the phone re-started. Got me right back to square 1, emergency screen with no jailbreak. Another 20+ failed attempts later, Frodo miraculously re-appeared. Again, stared at me for a few seconds; iPhone re-started and back to emergency screen. Any ideas how I can get Frodo to actually jailbreak this thing?
Cheers
October 18th, 2009 at 7:20 pm
i have tried jailbreaking my Iphone 3G 8GB on vista for nearly over 5 hours and still nothing ive done everything like put Blackra1n into C: drive, run as admin, etc and it allways gets stuck on entering recovery i left it for like and hour and was stuck ive restored it loads of times is there anyone that can help !!!
October 18th, 2009 at 11:25 pm
does not work for me. Im running Iphone 3g with 3.1.2 anyone else have any luck with the 3g?
October 19th, 2009 at 1:14 am
Worked great on my 3G tonight, took 30 sec after itunes took 5 min to update my phone. Only thing that doesn’t work is can’t get appsync to install, gives some error not sure if appsync is even ready for 3.1.2 yet tho.
October 19th, 2009 at 1:50 am
Ok, I had V 3.0 and used redsn0w and it worked a treat. was able to sync apps no worries, then I upgraded the firmware to 3.1.2 and lost all my apps. now that I have jailbroken my 3GS V 3.1.2 how do I sync apps to it?
October 19th, 2009 at 4:46 am
I’ve used blackra1n to jailbreak worked like a charmed but I do not have anymore the option the share my internet connection any clue ?
October 19th, 2009 at 8:43 am
I was about to give up on this after trying to run it from two different PCs. As my iPhone is stuffed to the gills with apps I decided to do a FACTORY RESTORE to 3.1.2 and then run it. It worked first time after doing this.
Ran on Windows 7 in Vista SP2 compatibility mode, Bonjour service stopped.
Nice simple jailbreak.
October 19th, 2009 at 10:32 am
Can someone help me out with some one on one getting this thing to work? I have been working to get this jailbroken, but i can’t get it to work 100%.
Email me @ ByndGalaxiesS@aol.com
If i could just get one good person to help me out, that would be awesome. Thanks.
October 19th, 2009 at 12:14 pm
This will not work with ITouch 3g model starting with ‘MC’ which is probably the 8gb model. I tried on 1g, 2g and it works. As long as model number don start with MC, this will work.
October 19th, 2009 at 12:50 pm
BLACKRA1N DOSE NOT JAIL BREAK THE IPOD TOUCH 3G WHEN YOU RUN THE PROGRAM YOUR IPOD WILL NOT WORK YOU HAVE TO RESTORE YOUR IPOD
October 19th, 2009 at 1:04 pm
Yes it does work on the itouch 3rd gen, it took me until the 3rd time of trying but it did it within 5seconds, but jailbreaking didnt seem all it had lived up to be for me, hopefullly i will change my mind about it :/
October 19th, 2009 at 1:48 pm
this video explains how to fix the problem I (and many others) encountered where blackra1n would start and then the phone would just get stuck in recovery mode forever. the fix involves holding down the power and home buttons like in the original quickpwn, just watch the video TWICE before you actually try it. hope this helps!
http://video.aol.co.uk/video-detail/fix-iphone-3g-blackra1n-problems-312/3047235289
October 19th, 2009 at 2:30 pm
this isn’t working. after i do exactly as it writes here, and on many more sites (even with pressing power and home buttons), everything goes well (blackra1n installs on touch, and after that i install cydia from blackra1n) but my touch 2nd gen is not jailbroken. when i try to install cracked applications, i get error message (unknown error occurred 0xE8008001). model number is not start with mc.
October 19th, 2009 at 9:06 pm
okay i have Ipod touch 3.1.2. i know its tethered but it still works doesnt it? i hit make it ra1n and it does everything right but then when it comes back to reboot it doesnt come back on. what do i do to make it come back on and work properly? please tell me what to do.
October 19th, 2009 at 10:05 pm
mine keeps getting stuck on “waiting for reboot” I have a iPod touch 2g with 3.1.2 firmware, if that helps any. please help someone?
October 20th, 2009 at 4:30 am
How do I fix the phone that I just bought two months ago that your software bricked?
October 20th, 2009 at 5:07 am
Good work! had a fair bit of trouble with vista but the instant got onto xp worked like a charm.
October 20th, 2009 at 5:42 am
I have successfully jailbroken my 3GS 3.1 but unable to unlock… can anyone help? Ultrasnow won’t do the unlocking job…..
October 20th, 2009 at 6:03 am
If you can’t get it to work, disable the bonjour services (go to Start > Run > services.msc, right click on Bonjour > properties > disable) and in task manages, end all processes that are appl related, except for AppleMobileDeviceService. Basically, just end iPodService and iTunesHelper. Run, and it works!
Just remember to enable the bonjour service again!
October 20th, 2009 at 8:42 am
i have a question??? im new to the whole jailbreaking thing sooo… Is it okay for me to install cydia and hackulous through the rogers internet and not wifi or should i wait to install these until i have wifi??? will rogers detect that i’ve jailbroken my phone??
October 20th, 2009 at 11:30 am
Worked perfectly first try. . . THANKS!
October 20th, 2009 at 4:34 pm
Thank you Sia.G. I tried everything and did not work until I desabled my Bonjour in the vista Services!
October 20th, 2009 at 7:47 pm
Greatest thing I have ever tried. Actually works for 2G. Didnt have to wait like you did with the pwnagetool for 3.1.1. Much better and takes about 20 seconds including recovery mode time. And you do no work. Love it.
October 20th, 2009 at 9:53 pm
Somebody needs to help me asap before i launch my iphone 3g 3.1.2……i tried every way possible and all it keeps saying is running…HELP!
October 20th, 2009 at 9:56 pm
k…now im getting desperate… ANYBODY?
October 21st, 2009 at 1:23 am
The alternative method over at http://www.ihackintosh.com/2009/10/jailbreak-your-iphone-ipod-3-1-2-with-blackra1n/ worked perfectly for me with iPhone 3G 16Gb + 3.1.2
October 21st, 2009 at 1:27 am
how to install blackra1n in your device..make your ” WiFi ” ON… & run ” make it ra1n “
October 21st, 2009 at 2:42 am
Dont even waste your time with this 3.1.2 is only bug fixes so it is not nessasary to do it immediatly so you can wait for the dev teams jailbreak especially for the iphone 3g because most have complained of it not working. everybodys safest bet is to wait for dev team, get aptbackup to get your stuff back then update and that should take care of most of your problems…
October 21st, 2009 at 3:28 am
DougAus..that website and alternate method worked….too easy…thanks
October 21st, 2009 at 3:29 am
Go here and follow aternate method
http://www.ihackintosh.com/2009/10/jailbreak-your-iphone-ipod-3-1-2-with-blackra1n/
October 21st, 2009 at 4:56 am
Just got this to work at last!!! I tried this about 20+ times and it stopped at various stages and never actually worked so I closed iTunes then checked my running services. I closed all services to do with iPhone or iPod and also the iTunes helper service. I also had lots of rundll32.exe services running which I thought might have been from all the times I tried to run the blackra1n program so I closed all of those too. I then slid the slider to get to the home screen and run blackra1n again and it worked straight away.
I don’t know if it’s because of how I did it or just coincidence but it’s probably worth a try for anyone still having problems with this!
October 21st, 2009 at 10:10 am
Is this version of blackra1n a beta and do you have to have ipt 2g plugged in to the computer in order for blackra1n to work
October 21st, 2009 at 2:24 pm
If anyone is having issues jail breaking with blackra1n plug in the phone, hold the home and power, keep holding until you see the apple logo (should take at least 30 secs) then let it boot back up, then click make it ra1n. Thank you john ^^^^^
October 21st, 2009 at 2:55 pm
it works. disable all itunes/apple applications on your pc after u do the 3.1.2 update. reboot your phone once. put phone in airplane mode.
after it works, go to cydia and do update. then search for afc2add in cydia apps. install this and winterboard, iphonebrowser, etc will work!
October 21st, 2009 at 6:10 pm
HELPPPPPP IDKK WHATS HAPPENING I CLICKED MAKE IT RAIN AND NOW ITS STUCK ON RUNNING AND MY IPOR SAYS CONNECT TO ITUNES BUT THERES LIKE A PINKISH SCREEN OVER IT! I DONT HAVE NE OF MY SONGS ON ITUNES. HELPPPPPP
October 21st, 2009 at 6:29 pm
i have a colorful screen just like james above me rllyy high up
October 21st, 2009 at 6:32 pm
http://i37.tinypic.com/2hsaqvo.jpg
October 21st, 2009 at 7:24 pm
my 1 touch 8g 3,1,2 wont jail break???
October 21st, 2009 at 7:29 pm
why???
October 21st, 2009 at 7:41 pm
Alright..after restoring my iphone 4 times..finally got it to work. . Using vista, iphone 16gb . . This is what i did: 1)restored the phone 2)switched to the rear usb port of my comp 3)restarted the comp 4)closed itunes 5)started taskmanager : stopped ituneshelper, synhelper and a couple of processses starting with sync.. 6)blackrain in c:/ 7)right click, run as admin 8)make it rain
October 21st, 2009 at 9:47 pm
I tried blackra1n on my iTouch 3.1.2 (7D11) about 10 times. It would go through all the steps but when it is suppose to reboot you would only get a blank screen, despite all efforts to turn it on. it won’t. Any body can help
October 22nd, 2009 at 6:08 am
gr8tful, thats what was happening to me and I tried it 20+ times. Then I did what I put in my post above and it worked first time after that.
October 22nd, 2009 at 6:17 am
i upgraded my iphone 3g with the 3.1 software from itunes… now my phones dead, any ideas anyone . PLEASE. or maybe i should just get another one & be more careful next time
October 22nd, 2009 at 12:32 pm
I found here the solution:
http://tuttoxiphone.myblog.it/archive/2009/10/21/blakra1n-non-funziona-con-iphone-3g-ecco-la-soluzione.html
I hope it will help you.
Bye
October 22nd, 2009 at 5:03 pm
I used Blackra1n to jailbreak my 2g Iphone. It did everything fine but now I don’t have wi-fi anymore under settings. HELP!
October 22nd, 2009 at 5:33 pm
after takin bout 10 mins or so to reboot, there’s no blackra1n app on my ipod. wats up wit that? wat shud I do?
October 22nd, 2009 at 7:09 pm
does not work. no one helps me. waste of my life.
October 22nd, 2009 at 11:30 pm
READ COMMENT #101 (ALISHER)
I FOLLOWED THESE INSTRUCTIONS AFTER A DAY OF REBOOTING AND BLACKRA1NING AND FAILURE AND ALISHER’S METHOD FINALLY WORKED FOR ME.
THANK YOU ALISHER!!
October 23rd, 2009 at 6:01 am
i used blackra it work good fast n easy but when iuse iphon explorer its wont show me my root files its sasys need to be jailbrked or jailbrokn !!how is that alrdy i have cdya n rock n my idvice?thanks
October 23rd, 2009 at 11:09 am
What do you mean not capable like I gave 3.1.2 and it won’t reboot my phone after the process is done it just stays black
October 23rd, 2009 at 11:21 am
Woot! took me four tries but it finally worked. Don’t know what made it work though. Tried opening itunes, nothing. Disabled Bonjour, nothing. Plugged it in and let itunes show up first and unchecked the “open itunes when ipod is plugged in” option and closed itunes, Success
October 23rd, 2009 at 12:00 pm
geohot, you are awesome!!! Thanks a lot for this fantastically easy jb. I did it with 3G and 3.1.2.
October 23rd, 2009 at 3:59 pm
What a nightmare. Heres what finally did it for me, as soon as the phone goes into restore mode and screen turned black hold down the sleep button and do not let it go until his ugly mug shows up on your screen. Took me a million times and that was the only thing I did differently.
October 23rd, 2009 at 4:47 pm
holy **** dang man 10 seconds and i already got cydia open!!
October 23rd, 2009 at 6:31 pm
I cant get Cydia to install, it keeps saying no internet connection and could not download. Please help.
October 23rd, 2009 at 6:54 pm
If it doesn’t work for you, don’t fret, it’s not you fault like all these A-holes keep saying. I jailbroke my 16GB 3GS in 10 seconds using this program. However, my sisters 8GB 3G will simply not work. It gets stuck in recovery mode every time I try. Just wait for a solution. Check posts often.
October 23rd, 2009 at 7:20 pm
great program worked like a charm on my 16gb 2g ipod
October 23rd, 2009 at 10:10 pm
i have a 8GB 3G and i cant get my phone to come out of recovery mood! help plese
October 24th, 2009 at 3:59 am
@ john
thank you for that advice my iphone is now jailbroken
October 24th, 2009 at 12:03 pm
Do I NEED to restore my iPod Touch 2nd Gen before running blackra1n? I’d like to just update my non-jailbroken iPod to 3.1.2 and then blackra1n so I don’t have to back up all of my music and apps and such.
October 24th, 2009 at 1:37 pm
I have a 8gb iPod Touch 2g with 3.1.2 and I used blackra1n but I always have to restore it ,because blackra1n said “done, wait for reboot”. I have been wait and nothing happens..help pls
October 24th, 2009 at 5:43 pm
Good Day Everyone: I am a virgin at this Jailbreaking things and am wondering the future of my Ipod Touch 32Gb.
I have been successful at the jailbreak (dudes mug appears)and even loading cydia. When I go to reboor I get the Itunes USB pic.
Am I doing something wrong?
I also have questions regarding life after the jailbreak(1st time jailbreaker so be nice): - How do I reboot my Ipod Touch 32Gb? - Can I ever use Itunes? - How to I add apps? - Is there a program that is better than Itunes to add songs and apps?
Thanks
October 24th, 2009 at 6:04 pm
I clicked the blackra1n button on my mac. Everytime it keeps crashing, my iphone won’t even turn off and the computer doesn’t recognize the iphone anymore. It’s totally stuck in the “connect to itunes” screen. HELP!!
October 24th, 2009 at 7:06 pm
You need to make sure you have libusb installed! I tried this probably 30 times before i remembered that i might need libusb. After i installed it, it worked perfectly.
October 25th, 2009 at 12:27 am
if u tried to jailbreak ur iphone or i-touch with blackra1n and got a black screen after the process had finished.and now cant do anthing. see my blog to recover ur I-pod to its original state and enjoy http://knowstuffsbetter.blogspot.com/ its worth reading as u can get ur i-touch or i-phone back working
October 25th, 2009 at 7:59 am
Follow post 101 instructions – worked for me straight away after countless tries. Running Windows XP SP2 with iPhone 3G 16GB with 3.1.2. – Strange picture through
October 25th, 2009 at 11:28 am
HI, i am running 1G itouch with 1.1.4 firmware. can i blackra1n it? if yes how?
October 25th, 2009 at 4:18 pm
i tried about 100 times and blank screen download from firefox it works pefectly thanks
October 25th, 2009 at 7:38 pm
Hey guys! I finally did it. Here’s what worked for me:
-Put blackra1n in C: -You don’t need to run itunes or kill any process -Slide ur finger to unlock ur iphone (you should be in homepage now) -Run blackra1n
Here’s the key part. I tried this a million times on vista and it did not work, but it worked the first time on xp. If you have vista right click on blackra1n> click on properties> go to compatibility tab> Check the box saying “Run this program in compatibility with Windows XP”
If your iPhone freezes after the dude’s face pops up, wait a little then hold the sleep butten until ur iphone is off, then turn it on and blackra1n should be installed for you.
October 26th, 2009 at 12:07 am
Just bought OTB iPhone 3GS today. Do I need to be aware of anything nos before I connect it to my computer? I want to jailbreak and unlock. I want to keep My baseband 4. As for right now I have nothing installed, only emergency screen.
October 26th, 2009 at 1:20 am
Amazing. Took less than 5 seconds on a 3.1.2 OS itouch…
October 26th, 2009 at 3:44 am
please comebody help me am trying it it stucks on connect cable with itunes what i have do plugin or no plugin am dont understanding please somebody help me
October 26th, 2009 at 5:53 am
I have a 2G touch… If I jailbreak using blackra1n, will it be tethered or untethered?? Please answer somebody, thanks
October 26th, 2009 at 10:12 am
*****************NEW VERSION RELEASED******************** *********BLACKRA1N RC2 RELEASED ON OCT. 26th ***********
Tried Blackra1n RC1 never worked no matter how many time I tried.. DOWNLOAD THE NEW UPDATED BLACKRA1N RC2. Worked on the first try..
October 26th, 2009 at 12:31 pm
hi…this blackra1n thing worked fine on my iPod Touch 2G on windows vista well and i was able to install Cydia too. But however one little problem. Even though i can install apps from cydia i cant install cracked applications downloaded from other sites (like appulo.us). can anyone give the reason for this pls
. thanks….regards.
October 26th, 2009 at 1:23 pm
OMG… jailbroke only in 2 sec……
October 26th, 2009 at 11:29 pm
EVERYBODY TRY IT NOW IT WORKS!!!! FOR IPHONE 3G
October 27th, 2009 at 8:02 am
I managed to jailbreak a 3GS and have the blackra1n icons on the phone, however i have no 3g signal, only GSM. I get the error, “you are not subscribed to a cellular data service” any idea why this is? Do I need to install any of the packages Icy, Cydia?
October 27th, 2009 at 9:12 pm
when i download this i try to download cydia and it says could not download Error: Error Domain=NSURLErrorDomain Code=-1001 UserInfo=0×115E30 “timed out” what do i do. please email me. that would be much better. rickyh2@hotmail.com or rickyh22196@aim.com
October 28th, 2009 at 3:09 pm
JB iPT 3gen and the first time everytime I opened any legal appstore apps they would crash immediately. Just restored and rebroke after computer reboot and fcukin sweeeeeeeeet!
October 28th, 2009 at 4:22 pm
hi, after I save blackra1n and try to open it up from my desktop it says “cannot find entry point..” or something like that. Anyone know what to do to help??
October 28th, 2009 at 7:37 pm
hey could anyone tell me how to jailbreak a ipodtouch 16 g and version3.1.2
October 28th, 2009 at 10:04 pm
is there anyway i can jailbreak my itouch directly from my itouch without a computer
October 28th, 2009 at 10:08 pm
TY TY TY TY TY very much!!!
I love this program!!!
TY TY TY TY TY very much!!!
October 29th, 2009 at 1:38 am
wow i have literally been trying to jb 3g iphone for days now didnt really do anything different but it worked crazy fast first attempt today go geo
October 29th, 2009 at 4:46 am
Will this work for iTouch 3g 3.1.2 firmware??
PLEASE REPLY SOMEONE…
October 29th, 2009 at 1:56 pm
I tried so many different ways to do this. This is what worked for me on 3g 3.1.2 Plug the phone in, close itunes, run blackra1n. When it hangs on running, itunes will open on it’s own, close itunes again. then go into Task Manager and end process on ituneshelper. Then close blackra1n and run it again.
October 29th, 2009 at 7:58 pm
It worked perfectly yay
October 29th, 2009 at 8:18 pm
Use blackra1n now, its revision 2 and works much better on 3g’s. There is one thing I’ve noticed: the file system is not really unlocked with iFunbox and 3.1.2. What’s the best file explorer for the update?
October 29th, 2009 at 8:40 pm
i jailbroke my friends ipod and now it wont turn on or connect to my computer i have used this program before many times on other ipods. what can i do to fix this?
October 29th, 2009 at 9:01 pm
nvm problem solved
October 30th, 2009 at 12:01 am
jailbreak worked perfectly, i’ve installed cydia and rock, but still am unable to install downloaded apps, i’ve read i need an installer app. but can’t find one that supports 3.1.2 firmware. help.
October 30th, 2009 at 9:24 am
Question..
I have a 3G 64gb touch with 3.1.2 and it seemed to have worked. Only problem is that when I sinc my ipod, none of the apps I have in itunes transfers to the ipod touch. I get an error that states: “The application ” ” was not installed to ” ipod ” because of an unknown error (0xE8008001). ” Any insight will help..
October 30th, 2009 at 12:03 pm
question: I have an Iphone 3G 16GB. I have succesfully jailbroken. 3.1 Firmware. I can use it. But if I left it on for severl hours it crashes and I obtain only a “white screen of death”. If I left it without charge for a couple of days everything turns OK. But I cannot understand why. I tried everything. Back to 3.0. Left without jailbreak.. nothing to do. If I use it for 10 minutes BAM! White screen… I supposed it would be wet. So I opened it but the spots are still white, not pink…
Can anyone help me? Thank you…
October 31st, 2009 at 8:17 am
3.1.2 8gb 2g ipod goes into recovery mode every time but then screen goes black and stays until i hold home+power thentry again yet no jailbreak if you can help please reply perferably via email rubberwormdc@aol.com with subject ipod touch jailbreak
October 31st, 2009 at 11:04 am
Just ran BlackRa1n on iphone 3gs 3.1.2 OTB ran flawlessly and took about 30 seconds.
October 31st, 2009 at 12:11 pm
this program sucks balls every time i try to install something using either icy,rock or cydia i have to restore my ipod and i loose all my information
October 31st, 2009 at 3:52 pm
This program is a piece of zhit, fuked my 3gs 7 times already, DO NOT INSTALL THIS ZHIT IN UR IPHONE !!!
October 31st, 2009 at 6:23 pm
Fuking program, iphone is frozen now, for 4 hours
October 31st, 2009 at 7:11 pm
When ever I turn off my iPod after the jailbreak it goes into recovery mode and I a.m very ipset
November 1st, 2009 at 2:04 am
nehmo20 I love you!!!! 2 days I have been trying to do this – and your suggestions were the only ones that worked for me – you rock!!!!!!
November 1st, 2009 at 4:11 am
I came up with an idea and it works for mc ipods..here it is. get all your music – apps – and pics on it first and then install black ra1n….it will work. iv done it install it and after it loads just install in this order. cydia-installous thats it….nothing else…if you install winterboard it will reboot and stay in recovery mode and you will lose everything….if you restore your backup you will lose everything…best way to say it you will have app store and all your stuff. intill a blackra1n ver comes out its better than nothing at all. I hope this helps alot of ipod 3g users for now. oh and cant rboot or let it die.
November 1st, 2009 at 12:37 pm
Does this version have copy and paste? It’s been ages since I did a firmware update.
November 1st, 2009 at 10:29 pm
I’ve tried and tried and tired but blackra1in still won’t worl on my IPhone 3g(not even blackra1n rc2). I keep getting stuck on the usb screen and nothing happens. I’m sick of retoring my iphone.
November 2nd, 2009 at 1:01 am
I tried this 4 times and have FINALLY had success! I have an iphone 3G and am running on Windows Vista.
From the many, many forums I’ve been reading tonight it seems alot of people had to tweak things around to get things working. The following is what worked for me. If the below doesn’t help you, keep researching, keep trying!
Hope this helps anyone else!
November 2nd, 2009 at 1:07 am
Btw, for those of you getting stuck on Recovery Mode, if you have the “Quickpwn” program on your comp, open it and it will tell you to exit recovery mode to Hold power & home for 15 seconds, and then hold power for 2 seconds.. it turns the phone off and restarts normally w/o going back to the stupid recovery mode.
I think you might have to have the program though, I tried to repeat this w/o the program opened and it wouldn’t exit Recovery Mode. … if it’s any help I believe the QuickPwn I have is Version 2.2.5-2 . I had this program still installed from when I jail broke my 3G on previous firmwares.
November 2nd, 2009 at 8:28 am
The jailbreak works but as soon as I restart my iPhone after installing a cracked app it starts in recovers mode. Is there any solution to that problem? Maybe the jailbreak wasnt really successful?
November 2nd, 2009 at 11:01 am
Hello all help would be most appreciated. I was playing tap tap revenge with my jailbroken itouch 1st gen 8gb on firmware 3.1.2. The jailbreaking program used was blackra1n. It suddenly just went into recovery mode all of a sudden and it has been impossible to restore my itouch. Everytime i tried restoring it, it would just come up with an unknown error (28). Read through lots of forums, apple help and still to no avail. ive also tried running blackra1n in the recovery mode directly as some videos said it might work so as to reset my itouch but it always hangs once i see the guys face. Any ideas??
November 2nd, 2009 at 1:45 pm
^did you manually restart or do you mean when it auto reboots/respring after installing ? Maybe you can try what I had to do wth quickpwn to get out of recovery and see if your apps function properly and download another app see if that happens again, or try holding home and power until screen turns off (didnt work for me but i read for some it does?), or just restore your phone in itunes (longer route) and jailbreak it again.
November 2nd, 2009 at 5:47 pm
i format my mobile and i cant restore it and i dont have att sim it always says error 13 can any pls help me
November 2nd, 2009 at 5:57 pm
wow it jailbroke before i even realised! amazing
November 3rd, 2009 at 7:24 am
I have a new iPhone 3gs 16GB with 3.1.2 software w/o a simlock. I’ve succesfully(or maybe not?) jailbroken it with blackra1n rev2. There were no problems during the jailbreak process, but now every time I restart my phone, it gets stuck in recovery mode. I have to run blackra1n again to make it work. Is there any solution to this problem? Today I’m going to borrow a Macbook and try to do a jailbrake with PwnageTool 3.1.4 – I hope it will solve this case.
November 3rd, 2009 at 10:34 am
please help me….. i cant jailbreak my iphone its a 3g 16gb black,,,, i tried to use the blackra1n many times but i couldn’t when the phone reboots it just give me the iTunes screen please help me…marksman2006@hotmail.com
November 3rd, 2009 at 12:28 pm
Awesome work by geohot Here goes the tutorial Unlock iPhone 3g 3gs using blackra1n
November 3rd, 2009 at 5:42 pm
For those of you that are having difficulties opening and running Blackra1n. HERE IS A FIX!!!! * Right-click the blackra1n icon and click properties. * Click the Compatibility tab. * Under compatibility mode click the box to enable it and select Windows XP (Service Pack 2). Click OK, and then run blackra1n.
November 3rd, 2009 at 8:51 pm
I NEED HELP!!!!!!! see the thing is i unlocked my iphone (first gen mayb second) a first time already. Then just today i updated it to 3.1.2 and tryed to jailbreak it with blackra1n. after i do that the no sim card install came up and said insert a valid sim with no pin lock to activate iphone… can someone please reply to razenle@yahoo.com
November 3rd, 2009 at 10:54 pm
WOW WOW WOW! Loveeeee it! Thanks a lot to everyone here especially to George Hotz. Was very skeptical about JBing my iPhone but did it yesterday night and it was done in 5mins. Then downloaded Cydia via wifi and did many many wonderful things… soooo happy!
Windows Vista 32 + iPhone 3G 3.1.2
I restarted both PC and iPhone first then;
Did not stop any processes in task mgr whatsoever.
Still running fine this morning.
Thanks in advance.
I will go drop some donation to George!
November 4th, 2009 at 1:03 pm
Has anyone found a fix for this? This is still happening on my iphone.
I have a 3G 64gb touch with 3.1.2 and it seemed to have worked. Only problem is that when I sinc my ipod, none of the apps I have in itunes transfers to the ipod touch. I get an error that states: “The application ” ” was not installed to ” ipod ” because of an unknown error (0xE8008001). ” Any insight will help.. <<<
November 4th, 2009 at 6:18 pm
@ Roadrunerboi in BKK (post 388)
Instructions worked a treat!
was having issues before hand, but followed his instructions and bam! Epic Awesomeness.
November 4th, 2009 at 6:20 pm
Also – here is a good guide with pictures.
http://www.iclarified.com/entry/index.php?enid=5527
November 4th, 2009 at 7:10 pm
i try to install blackra1n on iphon 3g and it is stock on the display of the happy guy what can i do ?
November 4th, 2009 at 9:23 pm
Hi “the dhoodster”
Glad it all worked out. I am very careful with my expensive toys so I read up on almost everything before I began. And even had my fingers crossed while JB-ing. ha!
Isnt it great? My iPhone just “suddenly” filled up with apps… all of them FREE. Loveeeee it! Not to mention opening you phone on the metro and having another user gawk at it not knowing why your GUI is different from theirs.
November 5th, 2009 at 6:12 am
wow this is great.
November 6th, 2009 at 8:05 am
Hi, used this on my phone worked grate but when I went to settings and went to reset the phone it now wont come on its just dead any ideas ?
November 6th, 2009 at 10:42 am
hey guys! i have/ had a locked 3g. It was unlocked but then i had to restore it and had to load 3.1.2. i knew that there was now possibility to unlock again so i didnt use it for 2 weeks because in germany they are t-mobile-locked. yesterday i did the unlock with blackra1n and it
s working again. thanks for that BUT now i all of my itunes apps dont start… i tried several things like deleting all apps on the phone and in itunes and loading them again but still the same ****… is there a solution??? whats about restoring and unlocking it again? do you thing it will work? Please held me because thats driving me mad… thxNovember 6th, 2009 at 9:50 pm
after jailbreaking my 2nd gen 3.1.2 ipt i started jailbreaking friends ipods… now i tryed jailbreaking a 1st gen ipod running on 3.1.2 and it did the normal thing but now it wont turn on… i tryed dfu mode i tryed continuous restart i tryed connecting to iyunes i tryed running blackra1n and pretty much everything i no but still nothing… could i please get some help?
November 7th, 2009 at 7:01 pm
For those with a 3G getting a black screen stuck on when it’s supposed to reboot to Geoff’s pic. I found that leaving itunes open, and killing off “ituneshelper.exe” in the task manager made mine go through first try, as it’s supposed to. Also copied/ran it in the local disk, as admin, but w/o itunes open it wouldn’t go AT ALL past the black screen, regardless of how I ran it, or how many times, would just sit there for a long time on bs, and eventually just turn off.
November 7th, 2009 at 9:18 pm
@John (Post #1)
Hey bud i also have a 2G iphone, i really want to update my iphone to version 3.1.2 without it locking back up (im using T-mobile as my carrier) and my iphone is currently version 2.2
so can anyone please help me? i want to use blackra1n so bad but im not sure if it will lock up my phone. anyone please help me!!
November 8th, 2009 at 5:17 am
Can someone please help, i use blackra1n rc3 to jb my 3gs, everything is working fine with cydia and so on,,, but when i try to restart my phone i just can start it again without connecting it to blackra1n or itunes, it shows me the cable and the itunes logo, any idees?
November 8th, 2009 at 2:28 pm
How do I take the programs I downloaded from blackra1n once it’s on my phone already off?? For example i dont want the programs MyProfiles, IntelliScreen, Backgrounder, Cydia, and biteSMS, so how do i take them off my iphone??
November 8th, 2009 at 4:13 pm
To reboot your iPod you have to reboot it, by going back to blackra1n as if you’re jail breaking it again
November 8th, 2009 at 9:28 pm
so i used blackra1n and it works fine but my ipod touch 2g will not lock when i press the lock button any ideas why?
November 8th, 2009 at 9:43 pm
@Ann (Post #401)
Go to Cydia Go to “Manage”
You can delete whatever you want there. Hope this helps.
November 9th, 2009 at 11:45 pm
Ann – In order to remove Apps/Programs installed on your iphone, you can do it one of two ways. 1. You can open Cydia, then click “manage”, at the bottom right corner. Then pick “packages”, Then you can search alphabetically for the apps you want to remove. After you find the apps you dont want anymore, click on it and it gives you the option to reinstall, or remove. 2. Search for a program in Cydia called “Cydelete”. Once installed on your phone, you can remove apps that you got from Cydia just like normal apps. The X’s on the icons will just be another color.
Hope this helps.
November 10th, 2009 at 12:14 am
oomg i was scared to do this and thought it would be complicated but it was done in a matter of seconds on my new touch. grreat job
November 10th, 2009 at 5:04 pm
ok i’m new here i just used blackra1n it said i needed to set boot neuter but when i open it it says error couldn’t talk to boot loader this may be due to a commcenter collision so bootneuter will exit! whats with that can i stilluse cydia? help please ty
November 10th, 2009 at 8:03 pm
well idk if this question has been posed already caus im not about to read this shitload of comments but my ipod has been jailbroken and none of the apps were erased…is that normal cause i heard a lot of the wiping wtuff and …idk
November 10th, 2009 at 8:13 pm
how do you know if the apps u get come out free?
November 10th, 2009 at 8:18 pm
isnt this supposed to delete stuff????
November 10th, 2009 at 8:19 pm
????
November 10th, 2009 at 8:49 pm
i have a touch 2nd gen with 3.1.2 and i keep seeing this 1604 error. what do i do?
November 10th, 2009 at 11:47 pm
wow!!! awesome!!!!! it updated my phone in less than 30 second! good stuff!!!!! i’m noting!
November 11th, 2009 at 12:28 am
Okay I’m running an 8 gig iPhone 3g 3.1.2 and I ran it with a PowerBook g4 it worked percectly the first time make 100 % sure to bAck up your phone first and if u need to update ur phone un done the jail break 100% from ur phone computor and iTunes and restor it . I still frekibg iur that I might get. A 300$ paper weight so I might just undo it
November 11th, 2009 at 3:49 am
Hi all… Just another note… I think my wifi distance increased after JB-ing the phone. I used to not get 2bars of recep in the rooms (router outside) but not I get the full range. This is IMHO of course.
November 11th, 2009 at 10:43 am
is there an itouch 1st gen jailbreak?? if so sum1teel me where i can get it
November 11th, 2009 at 10:06 pm
its not working on my ipod touch 1g!!!!!!!!!!!!! someone help!!!!!! please!!
November 11th, 2009 at 11:17 pm
My home button doesnt work and my itouch says its disabled and my itune wont let me in it says there’s a password and enter a code to get in to itunes…help
November 12th, 2009 at 1:35 am
WOW so many idiots here, it works 100%
It does not brick the phone,
If your worried about a new update and it causeing it to brick……….How? Unless you understand how the programing works on the IPHONE do not make such stupid comments. Please………
November 12th, 2009 at 2:10 am
hi….my iphone3g is running with 3.1.2 firmware already unlocked i performed all d steps bt dere was no response after an auto reebot after opneing blackra1n only d blackra1n logo came once but the blackra1n app did nt appeard on d screennn….any suggestions….
November 12th, 2009 at 5:02 am
Hi, i got the black raindrop on my springboard, but when i install cydia in blackra1n, it download and respring, but there comes no cydia! I’m on 3.1.2 with my iPhone 3GS. please help
November 12th, 2009 at 10:40 am
help please, i have an ipod touch 3G 8GB, when i bought it, it had the 3.1.1 firmware, but iupgraded to 3.1.2 and when i tried to jailbreak with blackra1n, i got the picture with Geohot, but when it gets to the part when it’s supposed to reboot, the screen just goes black and doest reboot, can anybody help me please? ty
November 12th, 2009 at 1:48 pm
I have the new i touch 8GB 3.1.2 how can i jailbreak it?
November 12th, 2009 at 8:52 pm
my iphone now isnt showing ipod and phone and other applications that i REALLY NEED!!
November 12th, 2009 at 9:00 pm
Ok i have read all of the instructions, and the jailbreak did work but when i shut off my phone it goes right back to the connect to itunes screen and it makes me use blackra1n again. Is there a way to fix this? I have used blackra1n on my 16gb 3g and it worked fine but on my 32gb 3gs i have the problem noted above. The 3gs is 3.1.2 and the 05.11.07 firmware..
November 13th, 2009 at 4:25 am
What about 3gs users with the old bootrom before apple released the new one? Do jailbreakers have to worry about the reboot process of connecting it back to the comp to run blackrain again or are they good to go? I know you have to do the tether when you have a new 3gs with the new bootrom but was curious about the old bootroom. And those of you that do have this problem, to check your bootrom from a mac put your iphone in DFU mode and run system profiler and it should say what bootrom it is. If its prior to 359.3.2 then it is the old bootrom and according to other websites should work fine without tethering the boot, someone please confirm. ponemnk@gmail.com
November 14th, 2009 at 2:51 pm
Hi have 3gs on 3.1.2 jailbroke in in 5mins so easy and have installous on it but won’t let me download any cracked apps gives this message error 0xe8008001 I think I might knead to install something else but don’t have any idea.
Any help please
Mick
November 14th, 2009 at 6:17 pm
gr.. not many games, some of which are lite. LITE!
November 15th, 2009 at 9:28 pm
what does jailbreaking do?
November 16th, 2009 at 1:54 pm
Hey for those having trouble try this: IT WORKED FOR ME when I was getting stuck “entering recovery” point
Ok people I found the key to one eyed willie. For those getting stuck on running in blackra1n with the phone showing the usb connector and itunes do this. 1. put blackra1n on c drive 2. turn compatibility mode on. Vista users put XP. Xp users put windows 2000. 3. run program and hit make it rain. The program should get stuck on entering recovery mode at this point. 4 with the program stuck on entering recovery mode, hit power and home on the phone to turn it off. Leave the phone off. 5. close blackra1n. turn compatibility mode off. run it again, hit make it rain 6. turn iphone back on. wait for it to jailbreak. I’ve now done this on 2 iphones that wouldn’t work the way the normal directions state and it worked like a charm. Give it a try
November 16th, 2009 at 6:24 pm
I have an iphone 3g 16 gb. PC with Windows XP. I tell them what is my problem: Upgrade to 3.1.2 with iTunes updates. Movistar Argentina I’m not interested Gazette and release (although they deserve it because the attention is malisima but it is another topic) so the iphone still goes perfect. I Jailbrek with Blackra1n rc3 perfectly and I miss the GPS locate me. PushMail youtube and wrong. Restore the network configuration. And the gps still reach me. Install push fix, as I had suggested and nothing. I went back to restore to 3.1.2 and no jail, works perfectly. Thinking the problem was Blackra1n, I jailbreack restoring in custom firmware, those that already have the Cydia, and again the GPS locates me. I searched the internet and some say it’s the time change and a mistake that Movistar Argentina, but I when I blackra1n probe and release, with a chip another company and I did not locate. The Temne is that I would like to install tomtom have a gps like people, but with this problem the program did not locate either. I hope someone knows who goes and if you have any solution. Thank you very much Claudio
November 16th, 2009 at 11:39 pm
i have just used the program blackra1n which is an awesome jailbreak program. it did it in less than 15 sec. now that it is done i have tried to get winterboard and it will not show at all on my springboard… Is there any1 out there that knows why and or how to fix this problem? THANX ALL
November 17th, 2009 at 8:36 am
Now I’ve tried blackra1n three times for my iPod Touch, version 3.1.2 yet it won’t work. I start the program, comes to the part where it says Done, wait for reboot and then the screen on my iPod stays black. And when I turn it off and on again, then the blackra1n drop isn’t there. What’s going on ?
November 18th, 2009 at 12:08 am
try the site redmondpie.com
it has great step by step instructions for everything. i used blackrain for my iphone 3G running 3.1.2 and it worked perfectly. i now have tons of free cracked apps and no issues with any part of my phone. george now has the unlock and jailbreak for any version of iphone or ipod on all firmware and check for updates for any issues you might run into b/c there’s already solutions to dl in cydia for them!
November 18th, 2009 at 12:18 am
i forgot to mention for those of you using windows vista or xp…do NOT change the compatibility to winsow xp. i tried installing blackrain about a dozen times and it would be stuck saying “entering recovery” and id have to restore my iphone over and over again. i finally unchecked the compatibility just for the hell of it and sure enough i had blackrain in about 5 seconds. despite what the instructions say…if it doesnt work that might be why.
November 18th, 2009 at 12:18 am
windows* ack
November 18th, 2009 at 2:53 pm
I’m kind of an idiot with this stuff but will it work on a iPod Touch 1st gen with the new 3.1.2 firmware
November 18th, 2009 at 8:17 pm
very good jailbreak i clicked jailbreak as soon as i did it was done!
November 20th, 2009 at 6:09 pm
Geekygirl.
I jailbreak my 3g with blackra1n. Im have a hard time to install crack apps. Can you help me out???
November 20th, 2009 at 9:05 pm
hello.
i jailbreak my ipod touch with blackra1n. but i cant add songs to my ipod touch. any solutions? thanks.
November 21st, 2009 at 4:45 am
is he the king or is he the king???
best jailbreak ever!!!! -very easy -very fast -just the best
November 21st, 2009 at 4:37 pm
i blackra1ned my touch 2g 3.1.2 and its kinda messed up i need to know how to unblackra1n my touch now anybodya has suggestions??? pls email at
svidushan@gmail.com