The BlueAnt Q1 voice controlled Bluetooth headset for iPhone [$109.95 - TiPb Store] is the higher end version of the BlueAnt V1 I tested last month, and came away impressed with. How impressed? It’s a piece of hardware I would recommend it to anyone in the market for a new bluetooth headset. Now that the good folks over at BlueAnt were nice enough to send me the Q1, will I make the switch? For all of the juicy details follow us after the break!

Similar to the BlueAnt V1, this new and improved Q1 boasts many accessories in the package. Along with the sleek gunmetal voice-controled headset you get large and small earbuds, ear hook, USB cable, AC adapter, and a quick start guide.

In my V1 review I mentioned that the Q1’s improvements may not warrant the higher price to upgrade. I can now honestly say I was wrong. From a first glance, the Q1 looks much more visually appealing to the eye but it does not stop there. The Q1 measures 2.16 inches long while weighing in at .30 oz without the optional ear hook attached and .38 oz with it attached. These specifications help make this headset, hands-down, the most comfortable headset I have ever used. Even with the ear hook attached I can easily go a full day wearing it and not feel any discomfort. With the different sized ear buds and the ear hook you are bound to find a great comfortable fit. The controls are kept simple, you have the volume up/down buttons and the BlueAnt button which acts as power on/off, answer/end calls, and enables voice command.

Now lets get to the good stuff – performance. The BlueAnt Q1 simply out shines all of the competition I’ve tested in the performance category in every way except for battery life. My biggest complaint is that the headset gets 4 hours of talk time and 100 hours of standby. Sure that does not sound bad but when the Q1’s older sibling, the V1, gets one more hour talk time and 100 hours more of standby time… it makes me wonder how BlueAnt dropped the ball on that one. Moving on let’s break down the key features.

• Voice Control with the BlueGenie™ Voice User interface
• Multipoint technology allowing you to connect two handsets at once
• Voice Isolation Technology
• Revolutionary Noise Suppression and Echo Cancellation
• Custom internal wind-shields reduce wind noise to whisper

The first thing I noticed with the improved voice control present on the Q1 was speed dialing. On the V1 I found voice speed dialing worked a bit less than perfectly. I’m happy to report that on the Q1 it works flawlessly. You simply go by your favorite contacts stored within your iPhone. A simple tap of the BlueAnt button and a voice command of “Speed dial 1″ will call the first contact stored within your favorites. Not only can you use voice commands for speed dialing but other things such as checking your battery life, answering/ending phone calls, calling back the last incoming call, redialing your last outgoing call, etc… A great feature that 99% of the time understood what I was saying and completed the task.

Another feature, called multipoint technology, is one that some of you out there can appreciate while others will have no use for. Multipoint technology simply means that you can connect two phones to the Q1 at the same time and answer whichever one happens to be ringing. A nice feature for those of you dual-wielding 2 phones such as your beloved iPhone and say your Blackberry. I know with my previous headsets it would be a pain to have to repair the headset to another one of my phones so this is a welcomed feature.

The biggest improvement I have noticed coming from the V1 to this Q1 is all of the voice isolation technologies that are being implemented within the headset have been improved. When I was in a room with complete silence the person on the other end of the line would hear me crystal clear. The big test was how would it perform in a noisy situation. I am happy to report it faired pretty well. While the BlueAnt Q1 does not use a similar technology to the Jawbone’s noise assassin, the DSP technology in the Q1 does it’s job extremely well. The headset places all ambient noises and makes them sound very distant while raising the sound level of the users voice. Not a single caller complained about not being able to understand me or hear me loud and clear. The biggest improvement over the V1 was made in the wind-sheilds. Living in Chicago I had a great environment to test this out. While all wind noise was not erased, the caller on the other end always was able to hear with me clarity, even with a strong city wind smacking me in the face. Job well done.

Overall the BlueAnt Q1 voice controlled Bluetooth headset for iPhone 3G and iPhone 3GS is a excellent, top quality headset that should not be passed up if you are in the market for a top of the line piece of technology. Buy it now!

Learn more and purchase @TiPb’s Store >>>

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

BlueAnt Q1 Voice Controlled Bluetooth Headset for iPhone 3G and iPhone 3GS

The BlueAnt V1 Bluetooth Headset for iPhone 3G/3GS [$68.92 - TiPb Store Link] has been a pleasant surprise as I did not think I’d find another Bluetooth headset that I would prefer over the highly regarded Jawbone PRIME.

For the full scoop follow us after the break!

The first thing you will notice is the amount of goodies that BlueAnt has given you in the package. Along with the actual headset you get a rubberized metal ear hook, translucent ear hook, small and large rubber ear gels, small and large foam tips, gooseneck USB cable, USB adapter, USB car charger, AC power adapter, and last but not least the manual/quicks start guide.

With all of that said, lets get into the fit and performance of the V1. The V1 weighs in at a light .35 oz and is 1.5-inches long. Some headsets can just be flat out annoying after a long period of use, not the V1. It is honestly the most comfortable headset I have tried to this very day. It is so comfortable you may just forget you are even wearing it! BlueAnt claims you will get 5 hours of talk time along with 200 hours of standby. I’ve found that those times are pretty accurate but If you find that 5 hours of talk time is to low for what you need, you can always take advantage of all of the charging options you are supplied with. One thing I did notice was that when my headset was running low on battery, alerted by an audible tone, the person on the other end would claim they could not hear me anywhere near as clearly. It was an odd occurrence that would only happen with the battery drained.

Minus that particular issue, the V1’s dual microphones offer superb voice clarity. While it does not have that amazing background noise cancelation feature of the Jawbone headsets, the V1 does have DSP (Digital Signal Processing) that BlueAnt calls Voice Isolation Technology and it works well. The V1 provides outstanding noise suppression, wind noise reduction and echo cancellation. There are two modes available while you are on a call – Voice Isolation Standard and Voice Isolation Max.

The feature that really makes this headset stand out from the rest is it’s voice user interface which allows you to control most of the V1’s functions with your voice. Pushing one button activates the voice recognition technology and gives you control of all the functions of the V1. If you need assistance, just say “What Can I Say?” and the headset will tell you the commands you can use. When you have an incoming call you will be alerted by the V1 telling you who is calling via telephone number. Unfortunately it can not access your phones contacts to read back names but beggars can’t be choosers.

Overall, I found the BlueAnt V1 to be a high quality headset that is worth every penny of it’s low price. Sure you can spend $100 plus on other headsets such as the V1’s younger brother, the BlueAnt Q1, but why bother when they share almost the exact same features?

My Jawbone is now collecting dust as the BlueAnt V1 is now my new daily driver.

Learn more and purchase @TiPb’s Store >>>

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

BlueAnt V1 Bluetooth Headset for iPhone 3G and iPhone 3GS

With WWDC 2009 right around the corner, there is excitement in the air. The iPhone OS 3.0 software and a highly possible next generation iPhone are right around the corner. Now what does this have to with the Plantronics Voyager 855 Bluetooth Headset? The answer to that question is simple – A2DP (Advanced Audio Distribution Profile). Finally A2DP is coming to an iPhone near you… unless you still plan on keeping that first generation iPhone. (Sadly, for A2DP, you guys will need to upgrade to a current 3G model or the soon-to-be-announced next generation hardware.)

So, iPhone 3G owners, what better way to get a jump on things than by picking up the Plantronics Voyager 855 Bluetooth Headset?! It is available in TiPb’s sibling store WMExperts for a cool $69.95. After the break, a full review!

Design

The Voyager 855 consists of two pieces: a headset unit, which is where you will find all of your controls, and the detachable earpiece, which is what you will use to turn the 855 into a stereo headset – pretty crafty indeed.

The headset is sleek and stylish with its black coating with silver trimmed accents. The mic boom slides out to bring the microphone closer to your mouth. That not only makes it easier for the person with whom you are speaking to hear you, it’s also a way to answer and end calls – more on that a bit later.

Next up is it’s size. The Voyager tips the scales at mear .53 ounce (11 Grams) so it is surprisingly on the lighter side compared to other headsets available. It measures 2.25 inches by 0.5 inch by 0.6 inch. So again, not large by any means unless you have the boom extended. With the boom, look to add another inch or so to it’s length. To get a better grasp on it’s size below you will can see the Voyager next to the Jawbone 2 and Apple’s no longer available headset.

Now if you are looking to get in on the stereo bluetooth action you will need the separate stereo plug-in cable with earpiece. It looks just like a regular earbud attached to an ear loop. To get stereo bluetooth you simply need to attach the ear loop with earpiece to the main headset. The stereo setup is meant to be worn with the cable resting behind your neck.

Also included in the box: ear loop stabilizer (2 sizes), sound isolating ear buds, micro USB charger, lanyard, and carrying case.

Usability

I’ve been using the Voyager 855 for about a week now and I will admit the sound quality is pretty good compared to other headsets I have used in the past. While the headset is not as clear as — or does not boast noise cancelation like the Jawbone — it does contain AudioIQ, which is simply a fancy name for digital signal processing or DSP. Without noise cancelation, loud conditions did create a bit of background noise but people I spoke with did not have any problems hearing me or vice versa. So overall the AudioIQ does it’s job well. To make your voice heard even better you can also slide the boom down closer to your mouth. The boom can also be used to answer and end calls simply by sliding it out or in respectively.

The added bonus of the Voyager 855 is it’s ability to turn into a stereo bluetooth headset by simply adding the stereo plug-in cable. The sound quality for listening to music was pretty decent as well. I have no complaints in that department.

The big question I always have when it comes to bluetooth headset is how comfortable is it to wear and how is the battery life? This headset comes with three earbud pairs in different sizes, allowing you to pick and choose the most comfortable fit for you. You can wear the headset with or without the included earloop, on either your left or right ear. So with that said, you should not have any issues finding the right combination that will comfortably fit your needs. Battery life was excellent. Plantronics claims 7 hours of talk time, 6 hours of listening time, and 160 hours of standby time. I’ve put it through the ringer this week and have had to charge it two times within the week with a good amount of usage.

Conclusion

The Plantronics Voyager 855 Bluetooth Headset, which is available in the WMExperts store for $69.95 is a fantastic deal. Not only will you be able to take full advantage of the upcoming 3.0’s A2DP feature you get a very good overall bluetooth stereo headset.

Pros

• Low price for what you get
• Stereo Bluetooth
• Fits comfortably
• Great battery life

Cons

• No noise cancelation
• Micro USB charger

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Pre-Review: Plantronics Voyager 855 A2DP Stereo Bluetooth Headset

Come this “summer”, iPhone 3.0 — see our walkthrough — will allow iPhone 3G (and perhaps next-generation iPhone users) to enjoy new Bluetooth functionality including stereo headsets, both the A2DP audio and ARCP control protocols. For consumers, the Motorola S9 Stereo Bluetooth headset (available from our sibling store, WMExperts) may be an option you want to consider come release day. For developers testing using the A2DP/ARCP profiles on the iPhone 3.0 Beta, they might even be something you want to consider now.

Note: This pre-review will not be focusing on iPhone 3.0 functionality, which is currently in closed beta. It will concentrate only on the headset itself. However, for those developers needing an A2DP headset for testing 3.0, it’s our understanding this one works well on multiple units, over multiple carriers.

Form Factor

The Motorola S9 is a fixed form, if flexible plastic horse-shoe shaped, behind-the-head fitting audio solution that combines stereo music with phone functionality. The advantage of being a singular unit is that it’s solid, unlikely to become loose or break off at some weak join point. The disadvantage is that if your head is too thin or too wide, the headset will be either uncomfortable or unusable. Likewise, the behind-the-head layout will appeal to those who like wearing hats or otherwise don’t want the bar crossing over their head. However, it may be a non-starter for people who want to use them while reclining or lying down.

Controls

A status light in the middle of the bulge along the back of the headset separates the standards-friendly mini-USB charging port on one side from the power button on the other. Both are covered by soft touch red plastic. The right-side earpiece has controls for play/pause, forward, and back. The left side earpiece has controls for answering the phone as well as volume up and down. These controls are under harder black plastic, with the play/pause and answer buttons providing a tactile, click feedback, and the volume and track buttons on either side lying flat and flush.

Functionality

The S9s are rated for 6 hours talk and 7 hours music, but like any re-chargeable product, battery life can and will vary based on usage and cycle. Sound volume is good, as is music quality, though the compression required for AD2P stereo Bluetooth transfer might not be to the liking of audiophiles. If you’re happy enough with traditional MP3 sound reproduction, however, you’ll likely have no problem with this device.

Conclusion

The freedom provided by wireless Bluetooth stereo headsets like the Motorola S9 will be a boon to iPhone users, the convenience easily outweighing concerns of audiophile-level sound reproduction (at least for most). They won’t fit everyone on either end of the physical or usage pattern scale, but as with the quality, they’re well suited for a large enough swathe down the middle.

Bottom line, if you want something solid, affordable, portable, and functional for your iPhone 3.0 developer unit, or upcoming iPhone 3.0 release unit, you’d do well to consider the Motorola S9s.

Pros

• Good sound
• Good battery life
• Good price-point
• Light and comfortable
• Well suited for on-the-go use.

Cons

• May not fit all head sizes
• Not well-suited for lying down

TiPb Accessory Pre-Review Rating

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Pre-Review: Motorola S9 Stereo Bluetooth Headset for iPhone 3.0

UPDATED: ZDNet retorts, and says to chill.

ORIGINAL: iLounge (via Engadget) is reporting that the new iPod shuffle ships with headsets that not only include advanced (read: complicated) on-wire controls, but with lock-down chips that may prevent third parties from making compatible alternatives without ponying up licensing fees to Apple. Whether this is a money grab in exchange for technology Apple has patented and feels they deserve compensation for, or just another internet controversy that ultimately goes nowhere isn’t fully understood yet (least not by me!). iLounge says:

This is, in short, a nightmare scenario for long-time iPod fans: are we entering a world in which Apple controls and taxes literally every piece of the iPod purchase from headphones to chargers, jacking up their prices, forcing customers to re-purchase things they already own, while making only marginal improvements in their functionality? It’s a shame, and one that consumers should feel empowered to fight.

When the iPhone 3G came out, there was some noise that the new component and composite video cables that came along with it contained proprietary chips that would prevent 3rd parties from creating cheaper alternatives to the Apple-proper cables.

Launched along with the 2nd generation iPod touch was Apple’s new in-ear headset with mic and remote control, allowing music to be started, stopped, and skipped, along with volume to be controlled right on the headset. They worked not only with the iPod touch, but with the new aluminum unibody MacBook family, and to a lesser degree with the iPhone 3G. Was there a proprietary lock-down chip in those headsets?

Either way, are we sharpening our pitchforks and lighting our torches, or waiting to see how this develops before storming the streets of Cupertino?

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

UPDATED: iPod shuffle Signaling Apple Switch to Locked-Down Headphones?

The BlueTrek Mini Bluetooth Headset is available in two flavors, “Chrome” and “Gun Metal”, and can be purchased at the TiPb Store for $59.95 here. There are a ton of different bluetooth headsets to choose from for your iPhone, so when you have such a wealth of choices and different prices, how does the BlueTrek Mini compare? I’ve been using the “Gun Metal” headset and let me tell you what I think after the break.

In all fairness, I should start with the disclaimer that I’m a very picky bluetooth headset person and am hard to please. I don’t wear them very often, and when I do, it should be comfortable and it should perform.

In the Box

At a fairly reasonable price of $59.95, the BlueTrek Mini comes with a lot of extras. Along with the bluetooth headset, you also receive the standard charger, a car charger, a lanyard that attaches to the headset so you can conveniently hang it around your neck when not in use, two ear clips, and three different sizes of rubber ear buds. Also, a USB charger is included – very handy when you’re at your desk, working away, and still charging your headset via USB at the same time.

Design

The BlueTrek Mini is impressive in it’s size and weight, or lack thereof. It weighs only .35 ounces and measures .75″ wide, 1.60″ long, and .50″ deep. A round button is on the outside for answering and ending calls, as well as powering the headset off and on. A charging receptacle is located on the back, and a discreet volume rocker switch is placed along the side.

This headset boasts up to 7 hours of talk time and 10 days of standby time – quite impressive for such a small size. The provided lanyard and plastic ear hooks are well-intended, but unfortunately fall short of the bar set by the design of the earphone itself.

Performance

Once I fit the headset with the size of rubber earbud that fit snugly in my ear, I quickly paired the BlueTrek Mini to my iPhone and am glad to report that it’s easy to do. Once paired, I used it to make and receive several calls, listened to voicemail, and then used it for phone calls on my drive home. The sound quality is loud and clear on my end and the people on the other end had no complaints.

The BlueTrek Mini allows call redial, call rejection and call waiting with a press of the side button. It supports voice recognition, muting, and has a dual-color LED display. Bluetooth version is 1.2 and, as I mentioned, is easy pairing and I noticed hardly any lag when connecting with my iPhone.

The issues I had with this headset have nothing to do with the sound quality or functionality, but much more to do with the uselessness of the lanyard and the poor quality of the ear hooks. The lanyard line itself is fine, but the metal ring at the end that attaches to the earpiece of the headset is surprisingly heavy for such a light headset. I found that the hefty metal ring kept pulling my headset loose and right out of my ear, so for me, it was pointless to wear it.

Another problem is the provided ear hooks. I can understand why there are two of them in the box. They seem to be not much more durable than uncooked spaghetti. As a sign of things to come, one of the ear hooks was broken in the box. The second one lasted one day. They are so flimsy and brittle that it was pointless to include them. Perhaps the lanyard would make more sense if the headset had an adequate ear hook to keep the headset in place.

Conclusion

The BlueTrek Mini is a decent headset – very light, good battery life, and seems to have adequate sound quality. The price is reasonable, but is less impressive when the lanyard and ear hooks are practically useless. The car charger and USB charger are nice additions, and most likely you will find that one of the included rubber earbuds will fit snugly in your ear.

If you can handle using just the headset itself sans ear hooks and lanyard, then you may be satisfied with the BlueTrek Mini. If not, you may want to keep looking.

Pros

• Very light.
• Decent sound quality, easy to pair and use.
• Great battery life.
• Lots of extras, like car charger and USB charger.

Cons

• Metal ring on lanyard is too heavy, pulling this lightweight out of your ear.
• Ear hooks are cheap, brittle, and break; box should have included 100 of ‘em.

Rating:

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Review: BlueTrek Mini Bluetooth Headset

Ha! No iPhone news indeed! We knew Steve Jobs wouldn’t abandon us completely, not his baby, not his “third-leg” love child! Jason Snell, putting the new MacBooks under the microscope for Macworld, discovers (via Daring Fireball):

Yes, it’s true — these new MacBooks work with your iPhone headphones. If you click the button on your iPhone headphones, iTunes pauses. Click again, and the music resumes. A double-click advances one track, and a triple-click moves back a track—just like on the iPhone. What’s more, the headphones’ built-in microphone appears as the input device “Microphone port” in the Sound preference pane.

How awesome — and completely Apple-like is that?

(But is it enough to make you order a new MacBook?)

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

There Was iPhone News! New Macbook’s “Just Work” With iPhone Headsets!

Bluetooth headsets often offer the same feature set, the same styling, and the same performance. Plantronics is known for offering unique takes on Bluetooth Headsets and often add a new wrinkle to each headset in their product line. Popular because of their comfortable fit and Audio IQ technology, the Plantronics line constantly innovates.

With the Plantronics Voyager 815 Bluetooth Headset ($89.95), the innovation is an in-ear earbud and a sliding boom mic. Do they create a better Bluetooth Headset? Or are these features just bells and whistles? How does the Plantronics Voyager 815 perform?

Read on for the rest of the review!

Ed note: people looking to future-proof themselves might consider the Plantronics Voyager 855, it’s identical to the 815 but supports A2DP Stereo for music. If the iPhone ever supports Bluetooth Stereo, it’s a good option. Note, however, that the 855 has a 2nd earbud attached to the earhook, which might be annoying

Design

The Plantronics Voyager 815 falls in line with the look of a classic Plantronics headset. The sleek black plastic is outlined by a silver strip that tastefully adds symmetry to the design. It is extremely lightweight and feels very durable, Plantronics succeeds again in creating another quality looking Bluetooth Headset. The build quality is definitely that of a higher end headset.

There are three different in-ear earbuds you can insert to fit your ear not to mention the standard, included one. The in-ear earbuds are soft and malleable, they fit gently yet securely, in your ear. I found that the in-ear earbuds were very similar to high-grade earphones such as those from V-moda and Shure. Also, there are 2 different ear loops that allow you to stabilize the headset, though not required, I found it more comfortable with the ear loops attached.

The sliding boom mic is a unique feature in that it is supposed to make your outgoing audio sound clearer. There is no lock or extra click to fasten the boom mic, rather just simply a smooth slide to utilize the mic. You can also answer and end calls via sliding the boom mic. Though when extended, I felt the mic extension wouldn’t be as durable as the rest of the body of the headset because the plastic thins out. The headset is charged via micro USB.

Usability

The overall fit of the Plantronics Voyager 815 boils down to if you prefer the in-ear fit of noise isolating ear buds over the classic, less immersive regular earphones. Because this is strictly an in-ear headset, those who prefer the alternative should reconsider. The earbuds are of high quality materials and fit snugly in your ear canal, though the in-ear design may rub off some, the comfortable earbuds combined with the lightweight headset equals a great, almost unnoticeable fit.

The benefit of an in-ear design is that it blocks out surrounding noise and allows for a clear conversation. I found that though I’m typically not a fan of in-ear designs, using this headset is almost enough to convert me. Combining the AudioIQ technology (which automatically adjusts the volume to your surrounding) with the in-ear design, the incoming audio is superb. No static, great volume, and no background noise.

In varied tests with the PLantronics Voyager 815, I found that the outgoing audio quality was absolutely superb in quiet settings. Callers could hear my voice clearly without any digitization and no echoing. I was stunned by the quality of the outgoing audio quality, it worked wonderfully.

However, the Plantronics Voyager 815 isn’t quite the noise assassin that the Jawbone is so background noise is a bit of a problem. Extending the boom mic does help outgoing audio quality in this regard but the overall effect is minimal. Given a quiet surrounding and the Plantronics Voyager 815 excels, with a noisier background its performance is middling.

Final Thoughts

The Plantronics Voyager 815 Bluetooth Headset has become my go-to headset. The in-ear design blocks out surrounding noise and allows you to focus on the conversation. The fit is perfect, its lightweight body resting gently on your ears. The outgoing audio quality is superb when it is quiet and performs as well as most other headsets when background noise exists.

I think this is the perfect headset for anyone who prefers an in-ear design. The sleek and modern look is an added bonus and the comfortable fit is consistent with the Plantronics platform. Overall, this is easily one of the better headsets on the market today. You should consider it a BUY if you are looking for an in-ear design and a comfortable fit with great audio quality.

PROS

• Very Comfortable Fit
• Stylish Design
• Superb Incoming Audio Quality, Outgoing Audio Quality Shines In Quiet Areas
• Lightweight, Great Build Quality

CONS

• Average Performance in Noisier Environments
• In-Ear Design Not for Everyone

FINAL RATING: 4.5/5

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Review: Plantronics Voyager 815 Bluetooth Headset

With more and more Bluetooth headsets looking alike and new releases feeling like old ones, the Plantronics Discovery 925 Bluetooth Headset ($129.95) offers a much more unique take and infinitely more appeal. Its futuristic, luxury look was eagerly anticipated and has definitely shaken up the headset industry, putting all makers on notice.

Is the Plantronics Discovery 925 all show and no go? Or does it perform as good as it looks? And does it even look THAT good in your ear? Well read on for the rest of the review!

Read on for the rest of the review!

Design & Fit

Overall, the design of the Plantronics Discovery 925 is cutting edge, to put it mildly. With a sleek design that carves a hole in between the boom microphone, the headset truly looks like something from Star Trek. Personally, I am a fan of the design, I find it refreshing in the market of bland headsets and applaud Plantronics for creating such a bold headset.

From my experience, Plantronics headsets offer superb fit and comfort and the 925 is no different. Though the shape of the ear gels are a tad weird (they have a handle bar across the top edge that supposedly fits better to the interior of your ear, Plantronics calls it stabilizers), the gelly substance used in the ear tip is an excellent design choice in both style and comfort. I had no problem taking the 925 in and out of my ear.

The 925 is also very, very light. This is important since weighty or uncomfortable Bluetooth headsets often defeat the purpose of even using one, having a Bluetooth headset that is essentially unnoticeable is almost as important as the headset’s sound quality.

Usability

Because of the 925’s minimalist design, there aren’t too many buttons or features that complicate the process. Simply, slip the headset into your ear and you’re rolling. There are two buttons on the 925—one for volume control and the other to power up, make calls, and end calls.

I found that incoming audio quality performed fairly well. The AudioIQ technology works well and it is possible to hear callers loud and clear. There wasn’t many issues with static or feedback—it was very easy to hear the incoming caller. In louder environments, the 925 adapts to its surroundings and offers louder volume. I found this feature to be a great addition to the headset because I never had to worry about manually controlling the volume—the AudioIQ smartens up the headset.

Outgoing voice quality is good but falls short of being great. In regular usage—like in the car, or in a room, it is a more-than-able performer. Callers hear your voice loud and clear, without any digitizing or static. Few even noticed the difference between the 925 and the iPhone. However, the Plantronics 925 doesn’t do a great job of masking environmental noise. Callers complained about background noise that came from the TV, other people, and/or wind.

Final Thoughts

The Plantronics 925 is a good piece of hardware with a great design. Though it doesn’t offer much new features or innovative controls, the comfortable fit and fashion forward look should push those looking for a Bluetooth Headset to consider the Plantronics 925. In my experience, there are few headsets that fit as comfortably as the 925 and even fewer that look as striking as it does.

Though its high price may deter potential buyers from committing, the Plantronics 925 is a good headset that just falls short of great. If you are looking for a headset that will turn heads and fits great, this is the headset for you.

Pros

• Bold, Striking Design
• Extremely Comfortable Fit
• Easy Sync Process
• Simple Controls
• Carrying Case doubles as a charger!

Cons

• Fairly Expensive
• Not a Standout Performer

Final Rating: 4.5/5

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Review: Plantronics Discovery 925 Bluetooth Headset for iPhone

Not a fan of the stock headphones bundled with your iPhone?  Me neither.  Sadly, the quality of the headphones packaged with the iPhone and most other devices emitting sound are a fair representation of the profit-by-any-means-possible culture.  I think Apple figured they had such a hot product with the iPhone that they could bundle it with two cups connected by a string and it would still sell (and I suspect they’re right!).

Fortunately, other enterprising companies have stepped up to the plate and given unto us some worthy replacements for the stock headphones: enter Maximo, the makers of the iP-HS1 iMetal Stereo Headset for the iPhone, available at our Phone different store for $69.99.  Continue after the break for a full review!

Out Of The Box

The Maximo iP-HS1 iMetal Stereo Headset for iPhone includes some extras out of the box.  In addition to the earbud headphones, you also get a pair of earphone foam covers, a 2-ft extension cable, and a carrying pouch.  It’s nice to get a little more bang for the buck!

Form And Function

Having converted to the isolation ear-tip style of headphones many moons ago, I thought it would be a huge step backward in sound quality to use earbud headphones again.  The Maximo iMetal earbuds are surprisingly good, however.

The first thing I noticed is the build quality.  The earbud and driver housings are made of aluminum alloy, not plastic; thus, the name “iMetal”.  A high-definition condenser mic is located partway down one of the earbud cables, in just the right position to answer a phone call.  The overall length of the earphone cable is 4 ft.  If that’s not enough, a 2-ft extension cable is included.

Speaking of phone calls — if you are in the middle of a YouTube video, podcast, or jamming to some tunes on your iPod, everything pauses when a phone call comes in and resumes when the call is completed.  This is a normal feature for the iPhone, but there’s more.  Further down the headphone cable is a rubber button that can pause/skip the audio and answer/end a call.

To prevent annoying tangles and protect your headphones, a silver carrying pouch is included.  Just put the headphones inside and pull the drawstrings.

Sound Quality

With the foam covers on, the earphones are a fairly snug fit, which enhances the overall sound experience.  One advantage of the earbud style is that, unlike the isolator earphones, you can hear outside sound much better.  This is handy if someone is trying to get your attention, a city bus is bearing down on you, etc.  Of course, the disadvantage is you can hear outside sound much better — if you want to be completely immersed in your music with as little distraction as possible, then you will want to look at the isolator iMetal headphones instead (to be reviewed at a later date).

More about the actual sound — good high, mid, and low-range sound with a sufficient amount of bass.  With some headphones, particularly the earbud style, I have been disappointed in the upper-end volume level.  The Maximo iMetal earbuds have an impressive volume range.  If you like your music loud and clear, you won’t be disappointed.

When on a call with my iPhone, this headset performs well.  My callers could be heard with good clarity and volume, much like the quality of a land-line, and they could hear me just fine when using the iMetal’s high-definition condenser mic.

Conclusion

It’s nice to have a high-quality choice between the earbud style of headphones and the isolator rubber-tipped variety.  Maximo has a nice, quality product here with the iP-HS1 iMetal Stereo Headset.  Many people like the fit and comfort of the foam-covered earbud, and Maximo delivers without compromising sound volume and quality.

The features and extras in the box, at $69.99, is a pretty good value:  overall 4-ft length, 2-ft extension cable, carrying pouch, foam covers for the earbuds, microphone, and soft-touch button for call answer/end and song pause/skip.  These headphones are a great upgrade to the iPhone’s stock earbuds and it would have been nice if they were included in the first place.  Maybe Apple can strike a deal with Maximo.  Until that time, it’s nice to know that companies like Maximo make a nice product available at a reasonable price with lots of extras.

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Review: Maximo iP-HS1 iMetal Headset