So you are having issues with your iPhone? Maybe you jailbroke it and things did not go as well as you planned? Perhaps you have to take your iPhone back to an Apple Store because of a hardware related issue and you are jailbroken? Well I will tell you how to restore you iPhone back to it’s factory settings in a few simple steps.
Word of warning before you begin:
Restoring your device will erase all data from your iPhone or iPod Touch, including songs, videos, contacts, photos, calendar information, and any other data. All iPhone or iPod Touch settings are restored to their factory condition.
More after the jump!
Read the rest of this entry »
Since upgrading to iPhone firmware 2.1, from time to time my camera preview — and the pictures themselves — have taken to breaking apart and re-arranging themselves into something pretty much unusable (though likely to fetch a pretty penny at the snootier, more vacuous galleries, no doubt).
The above picture was of a plain surface, now broken into a patchwork of planes. Happens with faces, people, and just about everything. It’s not happening regularly enough, however, that I’m close to considering the nu-cu-lar option — full on restore.
Anyone else having this problem?
As opposed to “push” style ActiveSynch, MobileMe, or Yahoo! iPhone mail, traditional POP or IMAP accounts, like Gmail or ISP mail, needs to “fetch”, or check the server on a certain schedule to see if there are new messages.
Reader Mike wrote in pointing us to a thread on the Apple Discussion Forums about “fetch” email being broken with iPhone 2.1. I only fetch mail from Gmail, and Gmail IMAP is a strange and buggy implementation which gives me considerable problems beyond the iPhone, so I can’t say whether anything is really broken or not in 2.1.
Reader Steffen, however, after thinking the problem could just be undocumented IMAP IDLE behavior, decided to run some tests:
Finally, I had some time to look into this thorougly. I dumped IP traffic all night to see what iPhone does. My iPhone is set to retrieve data every hour. Here’s when the iPhone actually connected to my IMAP server:
09:36 PM, 10:44 PM, 11:02 PM, 12:36 AM, 06:36 AM, 09:38 AM, 09:45 AM, 09:57 AM
Looks like everything but an hour to me… Oh yeah, forgot to mention… I’ve turned off everything except for GSM radio do be sure to get all traffic. The last three connections occurred when I started to play around with the iPhone this morning. So, the effect that lead me to the assumption of IMAP-IDLE on the iPhone seems to be something else. It appears that the iPhone will contact IMAP more often while using it and somehow random while idling… So, no IMAP at this time, but maybe interesting as well…
Definitely interesting! Thanks Steffen!
Any other readers out there got “fetch” problems? Wacky behavior? Please let us know!
I typically choose to keep 10 episodes of any video podcast I subscribe to in iTunes. Back with version 1.0 of the Apple Remote App for the iPhone, when I would choose to play the latest episode of a show, the Apple TV would stubbornly start playing the oldest episode (sometimes oldest unwatched, sometimes just oldest) instead. “New” status seemed to have no effect.
This didn’t happen if I did the same thing via the iTunes library on my computer, only when I used the Apple TV, which streams from that iTunes library. I could work around this, however, by waiting for the oldest episode to start, then tapping my iPhone screen to flip the artwork around and reveal the episode list, then tapping the newest episode again. If I jumped through that hoop, the Apple TV would begrudgingly give me the actual episode I wanted.
With Apple Remote App version 1.1? No dice. I get the oldest episode no matter what. Most perplexingly, the iPhone will initially display the proper episode name in the title bar, then visibly switch to, and begin playing, the wrong one.
(Now, as punishment for testing it and writing this, the little fella has crashed, but offered to let me restart, run diagnostics, or restore… I chose the middle option for now).
Needless to say, this has changed the App from a useful tool to non-starter, and brought the tiny little white Apple TV back out of retirement.
Anyone else experiencing this problem? Anyone have a fix?
How is your battery life doing after upgrading to firmware 2.1? Hopefully better than mine!
I thought everything was going great after I updated Friday morning. Well I had a full charge late in the afternoon and left for work. A half hour later I noticed my iPhone was a bit warm without even using it. I Looked at my battery life and I was at 50% or so! Safe to say the phone was dead not long after.
So after a full night on the charger last night I thought everything should be good today. Well I was wrong. 2 hours of standby and a 5 minute phone call later, and my iPhone looked like the above picture. Actually that is exactly how it looked! What has really got me stumped is that I checked the usage meter and it said I used 1 hour and 56 minutes! A 5 minute phone call turned into that somehow? The time since last full charge was at 2 hours, which was correct.
I did a full restore without using a back up file after this, charged my phone and while the battery did seem to last longer, the battery meter is way off still. The “force quit” did not work, nor did any soft resets.
There is a thread over at Macrumors and Apple Discussions showing others are having this exact same issue, so that leads me to believe that my iPhone is not the issue but rather a issue with the 2.1 firmware in combination with something else? MobileMe possibly?
Turning off Push… my usage meter goes back to normal. Now I’m turning push on for mail only. We’ll see if it messes it up again.
If anyone has had issues like this please chime in.
UPDATE: I am happy to report that ever since I shut off push for contacts and calendars my iPhone is now working like it should. Just woke up and checked the phone, I almost have a full charge and it says I have used 1 hour and 16 minutes and time since last full charge is 10 hours. Which is correct. So it is a issue with mobileme push for sure. Whether it is getting stuck or whatever, if you are having battery issues and use mobileme or exchange try turning off push completely. Then, if it is the issue, slowly turn back on the email push feature and test it out. Then contacts and calendars…
UPDATED: Reseting everything, including the router, solved the problem.
After Apple unleashed 2.1 today, and I downloaded and installed it with nary a snag or bump, I thought everything was pretty much apps with my Apps. Needless to say, tonight I whipped out my iPhone’s handy Apple Remote App to help out with a little YouTube searching, only to discover that while my libraries (desktop, laptop, Apple TV) were all still set up, none of them would connect. (They’d all worked flawlessly, immediately prior to iTunes 8 and iPhone 2.1).
I removed the libraries and tried to set them up again, but can’t get the iPhone to show up in iTunes in order to type in the verification PIN. I’ll continue to trouble shoot and report back if I come across any fixes.
Anyone else having this problem?
Confession: My iPhone 3G/2.x experience has been relatively painless so far. No dropped calls, almost no 3G issues, very few App crashes, no eternal syncs, etc. While Steve Jobs reportedly said I’m in the norm, along with 98% of other iPhone users, you really wouldn’t know that from the intertubes. They’re on fire with dissatisfied users, and reader Anon, commenting on a post, points us to a thread on Apple’s discussion boards that indicates the dissatisfaction may not be ending any time soon.
The latest problem is with the 2.1 firmware — technically the 2.1.1 firmware already shipping, apparently, on the new second generation iPod Touch — and WiFi. Specifically, non-Apple Airport WiFi access points and the WPA security protocol (which should be what everyone is using now, right?)
While some might think this is no big deal, considering the older WEP protocol remains an option, TiPb would remind you that system can be broken in less than a minute these days, rendering it little better than no security at all.
For the record, however, I helped upgrade a 1st gen iPod Touch to 2.1 on Wednesday, and it connected to with no problems whatsoever to a Linksys WiFi router, so this might be one of the increasingly common, more complicated and multi-factor errors Apple’s been encountering (like Vista BSODs with iTunes 8…)
On the iPhone side, does this mean we’ll be getting 2.1.1 tomorrow as well? And will face similar problems? Or is Apple even now rushing an emergency rebuild of 2.1.1 or even 2.1.2 to finally — finally — give the 2%ers some stability?
