Let me start off by saying I’m not usually a fan of any protective skins for any cell phones that are currently on the market. I’ve found that Egrips for iPhone 3G have to sway me in a different direction, however, and I’ve found they can be quite valuable. If you’d like a more confident grip on your iPhone 3G, then Egrips available from The iPhone Blog Store for the price of $14.95, just may be what you are looking for.

For a more in depth look, keep reading after the break!

Design

Egrips are made from a specially formulated silicone elastomer that has an extreme amount of friction that prevents your iPhone 3G from sliding around on almost any surface, as long it is dry. You name it, it will stick — things like car seats, center consoles, counter tops, desktops, laptops and even your shirt sleeve. Egrips are only 0.5mm thick so if you decide these are for you, the days of bulky silicone skins and cases.

In the package you get 4 separate strips to apply to your iPhone 3G. The back piece, two pieces for each side of the home button, and one last piece for the upper right hand corner next to the handset speaker. You may be wondering, where is the piece for the left of the handset speaker? Well that’s an easy one to answer: there is none (it would cover the light sensors). Don’t fret just yet, you can still place your phone face down without it getting scratched. The three pieces do a fine job. Something else worth mentioning here is that Egrips comes in two variations: black (what I went with), or clear.

Usability

How many times have you set your iPhone 3G down on the passenger seat while you were driving only to take a turn and see your precious phone go flying off of the seat and crashing into the door or onto the floor? Scary moments, I know. I was a bit skeptical when I first received my Egrips but I put it to the test by placing my my iPhone 3G on the leather passenger seat in my car and took a nice quick ride. While I was nervous that my phone would go flying, to my surprise it didn’t move an inch. Success!

While some of you who don’t use a case may really enjoy Egrips on their own, I can understand there may be a concern for those who do use a case. I have eight or nine cases for my iPhone 3G, with the Egrips applied to my phone I was able to still use all of my holstered cases. Vertical or horizontal, it did not make a difference. For those of you who use hard cases or silicone cases, I am afraid you are out of luck. That add extra thickness of .05mm is just a bit too much for those types of cases.

A few more questions I had were: how long and how well would it stay on my iPhone 3G and would it stay clean? Honestly, I’ve only been testing out Egrips for about a week and I can say that I see no signs of them coming off anytime soon. None of the corners have peeled up or are showing any signs of that happening, which is a good thing. If you do want to remove it for whatever reason it does indeed come off without leaving any residue or damaging the phone in any way shape or form. Now the other all-important question: how clean would this sticky material actually stay over a period of time? Again, Egrips did not disappoint. What I expected was something similar to a silicone case. You put it in your pocket and when you remove it, it’s covered in lint. Not the case with Egrips, which was nice to see.

Conclusion

So if you are someone who likes the whole “naked” look of your iPhone 3G but you want a little more reassurance in terms of grip, Egrips are just the sort of product you should consider trying out. If you are someone who loves a hard case or simply wants the best protection you can get, you might want to pass on Egrips.

Pros

• Gives you excellent added grip
• Does not add much extra bulk to your iPhone
• Fairly cheap

Cons

• Does not offer the overall protection that a normal case can
• Hinders your ability to use some cases while Egrips are on iPhone

TiPb Rating

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Review: Egrips for the iPhone 3G

If you don’t know OtterBox, you should. They make high-quality, high-grade cases for the iPhone 3G that offer first-class protection. The OtterBox Defender Series for iPhone 3G ($49.95) is one of the most comprehensive cases ever designed for the iPhone 3G.

We had already taken a look at the OtterBox Defender Series for the Original iPhone, how does the updated version for the iPhone 3G hold up? Does it offer great protection? Is it just another case?

Read on for the rest of the review!

Design

The OtterBox comes in 4 different parts—each serving a purpose to cradle and protect the iPhone 3G. The base layer is a hard plastic shell (front and back). The second layer is a thick yet still soft layer of silicone that wraps around the aforementioned hard plastic shell. And finally, the last piece is a plastic cradle that adds another layer of protection but also doubles as a belt clip.

A thin sheet of plastic protects the screen, camera port, and Apple Logo while the headphone port, volume buttons, and sleep/wake ringer switch are protected via rubber caps. A thin cloth also covers the speakers.

Overall, the design of the OtterBox is carefully thought out and provides a perfect fit for every little nook, switch, and button on the iPhone 3G. Using a hard shell base layer with a silicone skin offers great protection while providing for even greater textile feel.

Usability

Obviously, the OtterBox Defender Series serves to a specific niche and those who have no need for such a rugged case would assume the case is in excess. But judging it from a pure protective stance—there are few options better. I have full confidence that the OtterBox case will protect my iPhone 3G in almost any likely scenario—a fall down the stairs, skidding across a hiking trail, and even a drop on concrete.

But because of its intricate design, care and exactness is needed when applying the case. The OtterBox is not an ordinary case that can be easily slipped off and on, you’ll have to fix the silicone to wrap around the intricacies of the plastic shell. Furthermore, the plastic shell seems to have a lot of clips and snaps that need to be put together. It’s a process to be sure, but after you’re done, this is protection at its finest.

Even more amazing is how the OtterBox maintains the iPhone 3G’s sensitivity and allows access to all its ports, buttons, and features. The touchscreen maintains the same sensitivity, I had absolutely no problem playing games and surfing the web with the OtterBox applied.

The buttons can be easily pressed except for the Home button. For some reason OtterBox decided to make a Home Button that cuts off the top of the circle. The plastic cover for the touchscreen can also get problematic if you leave some air space between it and the iPhone’s screen. Unsightly air bubbles would appear but I found this to be hit or miss and not particularly damaging.

The included belt clip is made from the same tough plastic as the hard shell and it locks the iPhone into it quite well. In fact, I often times had trouble pulling the iPhone out of the clip—the fit was that secure. The belt clip is able to rotate 360 degrees and the iPhone can be placed either be open faced or face backwards.

OtterBox has certainly improved on the deficiencies in the original iPhone, namely two issues that I had problems with are now fixed. The ringer switch is now accessible and the home button can be pressed when inserted into the belt clip. Bravo to OtterBox for listening to my complaints!

In all, the OtterBox offers as close to complete protection and coverage of every part of the iPhone. If you’re looking for superb protection or live an outdoor lifestyle, this case is truly one of the best available.

Final Thoughts

I’m a huge fan of OtterBox products because they put care into their design and they execute extremely well. The silicone seems to be of higher grade than basic silicone cases—offering better texture, thicker protection, and doesn’t seem to stretch as much. I definitely feel like OtterBox succeeded in creating a case that can offer maximum protection without sacrificing usability.

The one downfall is obviously price. At $49.95 it is a fairly steep cost to pay for an iPhone case. But compared with other cases priced near the Defender, the Defender offers an infinite amount more protection. Though it does add considerable amount of thickness, if you’re looking for a case that protects your iPhone from the elements—thickness should be expected.

Also, it cannot be fully submerged under water, a definite shortcoming considering its target market. However, with all things considered, the Otterbox Defender for iPhone 3G is great implementation of protection without compromise. All of the iPhone’s features are present with an unparalleled level of protection. I would consider this a buy for anyone who’s lifestyle is rugged, planning an outdoor trip, or is looking for the ultimate protection for their iPhone.

PROS

• Superb Protection
• Soft Silicone Feel
• Everything Protected, Every Feature Still Usable

CONS

• Bulky
• Pricey

FINAL RATING:

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Review: OtterBox Defender Series for iPhone 3G

How does the Otterbox perform? Is it as secure and successful as the case suggests? Or is it just another case in the iPhone pipeline? Could it all be just a gimmick?

Read on for the rest of the review!

Design

From a quick glance, the Otterbox Defender doesn’t look much different than any other case. Upon closer inspection however, you begin to notice the well-thought design and construction. Though it adds a considerable amount of thickness to the iPhone, it feels great and solid in hand.

The Otterbox Defender comes in four separate pieces: a front and back hard shell, a silicone sleeve, and a belt clip. The Otterbox Defender includes a protective plastic cover for the screen and an exposed plastic to show the Apple logo—I mean you still have to know it’s an iPhone right?

The camera is also protected by a thin sheet of plastic and the headphone jack and docking port are protected via rubber caps. The speakers and microphone have a very thin sheet of protection on it. The volume, lock, and home controls are also protected by rubber buttons with the silent/ringer switch is completely inaccessible.

Overall, the design of the Otterbox Defender is extremely sturdy and solid. The choice to use a combination of a plastic hard shell with a silicone rubber skin is great because it combines the protection of a hard shell with the overall feel of rubber.

Usability

With such an intricate design for a case, it is obviously going to take time to apply and remove the Otterbox Defender to the iPhone. There are a lot of clips that need to be snapped together and rubber that needs to fit in specific holes, but after you get through that process, make no doubt about it, your iPhone feels as protected as can be. The silicone rubber skin is of great quality and feels great in hand.

All the buttons—volume, lock, home—are equally as responsive with the rubber covering them. Amazingly, the plastic screen that protects the actual iPhone touch screen does not inhibit the sensitivity. I was very impressed by how responsive the iPhone’s touch screen was under that layer of plastic. The only problem with the plastic screen is that if pressed with any amount of force, it would occasionally create unsightly air bubbles. There didn’t seem to be anyway around it.

The included belt clip is made from the same tough plastic as the hard shell and it locks the iPhone into it quite well. In fact, I often times had trouble pulling the iPhone out of the clip—the fit was that secure. The belt clip is able to rotate 360 degrees and the iPhone can be placed either be open faced or face backwards. My problem with the belt clip is that the home button is not easily accessible and it is too tough to remove for easy access.

I have very few complaints about the Otterbox Defender for iPhone because it offers as close to complete protection and coverage of every part of the iPhone. Plus, it gives off a secure and solid look and also feels wonderful. If you’re looking for protection or live an outdoor lifestyle, this case is truly one of the best available and the price can easily be rationalized to be ‘worth it’.

Final Thoughts

I’m very impressed with the Otterbox Defender for the iPhone because of its thoughtful design and excellent execution. I loved the feel of the case because it not only felt sturdy and solid but it also added grip to an obviously slick iPhone. It definitely feels like OtterBox didn’t cut any corners with this case.

Unfortunately, it does come with a fairly high price. But compared with other cases priced near the Defender, the Defender offers an infinite amount more protection. Though it does add considerable amount of thickness, if you’re looking for a case that protects your iPhone from the elements—thickness should be expected.

Also, it cannot be fully submerged under water, a definite shortcoming considering its target market. However, with all things considered, the Otterbox Defender for iPhone is great implementation of protection without compromise. Almost all the iPhone’s features are present with an unparalleled level of protection. I would consider this a buy for anyone who’s lifestyle is rugged, planning an outdoor trip, or is looking for the ultimate protection for their iPhone.

PROS

• Protects Your iPhone in Every Imaginable Way
• Feels Great in Hand
• All Buttons, Most Features Easily Accessible
• Solid Build Quality

CONS

• Adds Considerable Thickness
• Occasionally Leaves Air Bubbles Behind Plastic Screen Cover
• Pricey
• Belt Clip is a Tight Fit and Gives No Access to Home Button

FINAL RATING: 4.7/5

This is a story by the iPhone Blog. This feed is sponsored by The iPhone Blog Store.

Review: OtterBox Defender Series for iPhone